Hi Scott,
Could you help me out with my query in the earlier email?
I would like to get to the root cause of the issue.
Since it is a storage system that is heavily used, I need to make sure
that the issue does not crop even after fixing the DNS.
Thanks.
Regards,
Indivar Nair
On Sat, Jul 13, 2019 at 8:31 PM Indivar Nair <indivar.nair@xxxxxxxxxxxx> wrote:
>
> Thanks once again, Scott,
>
> The patch seems like a neat solution
> It will declare rpc.statd dead only after checking multiple times. Super.
> I will patch the nfsserver resource file.
> (It should probably be added to the original source code.)
>
> We have a proper entry for 127.0.0.1 in the hosts file and the
> nsswtich.conf file says, "files dns".
> So if it checks the /etc/hosts first, why would the pacemaker's check timeout?
> Shouldn't pacemaker get a quick response?
>
> Localhost entries in the /etc/hosts file -
> -------------------------------------------------------------------------------------------------------------------------------------
> 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
> ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
> -------------------------------------------------------------------------------------------------------------------------------------
>
> Regards,
>
>
> Indivar Nair
>
>
>
>
>
>
> On Fri, Jul 12, 2019 at 7:47 PM Scott Mayhew <smayhew@xxxxxxxxxx> wrote:
> >
> > On Fri, 12 Jul 2019, Indivar Nair wrote:
> >
> > > Hi Scott,
> > >
> > > Thanks a lot.
> > > Yes, it is a 10+ year old AD setup, which was migrated to Samba4AD
> > > (samba+named) a few years ago.
> > > It has lot of stale entries, and fwd - rev lookup mismatches.
> > >
> > > Will start cleaning up DNS right away.
> > >
> > > In the meantime, is there any way to increase the rpc ping timeout?
> >
> > You could build the rpcinfo.c program from source (it's in the rpcbind
> > git tree) with a longer timeout.
> >
> > > OR
> > > Is there any way to temporarily disable DNS lookups by lockd?
> >
> > rpc.statd is doing the DNS lookups, and no there's not a way to disable it.
> > Doing so would probably make the reboot notifications less reliable, and
> > clients wouldn't know to reclaim locks, and the risk of data corruption
> > goes up.
> >
> > You could prevent the DNS lookups from occurring by adding entries (properly
> > formatted... see the hosts(5) man page) for all your clients into the
> > /etc/hosts file on your NFS server nodes. That's assuming that your nsswitch
> > configuration has "files" before "dns" for host lookups. Depending on how
> > many clients you have, that might be the easiest option.
> >
> > Another option might be to try adding a simple retry mechanism to the part
> > of the nfsserver resource agent that checks rpc.statd, something like:
> >
> > diff --git a/heartbeat/nfsserver b/heartbeat/nfsserver
> > index bf59da98..c9dcc74e 100755
> > --- a/heartbeat/nfsserver
> > +++ b/heartbeat/nfsserver
> > @@ -334,8 +334,13 @@ nfsserver_systemd_monitor()
> > fi
> >
> > ocf_log debug "Status: rpc-statd"
> > - rpcinfo -t localhost 100024 > /dev/null 2>&1
> > - rc=$?
> > + for i in `seq 1 3`; do
> > + rpcinfo -t localhost 100024 >/dev/null 2>&1
> > + rc=$?
> > + if [ $rc -eq 0 ]; then
> > + break
> > + fi
> > + done
> > if [ "$rc" -ne "0" ]; then
> > ocf_exit_reason "rpc-statd is not running"
> > return $OCF_NOT_RUNNING
> > >
> > > Regards,
> > >
> > >
> > > Indivar Nair
> > >
> > > On Thu, Jul 11, 2019 at 10:19 PM Scott Mayhew <smayhew@xxxxxxxxxx> wrote:
> > > >
> > > > On Thu, 11 Jul 2019, Indivar Nair wrote:
> > > >
> > > > > Hi ...,
> > > > >
> > > > > I have a 2 node Pacemaker cluster built using CentOS 7.6.1810
> > > > > It serves files using NFS and Samba.
> > > > >
> > > > > Every 15 - 20 minutes, the rpc.statd service fails, and the whole NFS
> > > > > service is restarted.
> > > > > After investigation, it was found that the service fails after a few
> > > > > rounds of monitoring by Pacemaker.
> > > > > The Pacemaker's script runs the following command to check whether all
> > > > > the services are running -
> > > > > ---------------------------------------------------------------------------------------------------------------------------------------
> > > > > rpcinfo > /dev/null 2>&1
> > > > > rpcinfo -t localhost 100005 > /dev/null 2>&1
> > > > > nfs_exec status nfs-idmapd > $fn 2>&1
> > > > > rpcinfo -t localhost 100024 > /dev/null 2>&1
> > > >
> > > > I would check to make sure your DNS setup is working properly.
> > > > rpc.statd uses the canonical hostnames for comparison purposes whenever
> > > > it gets an SM_MON or SM_UNMON request from lockd and when it gets an
> > > > SM_NOTIFY from a rebooted NFS client. That involves calls to
> > > > getaddrinfo() and getnameinfo() which in turn could result in requests
> > > > to a DNS server. rpc.statd is single-threaded, so if it's blocked
> > > > waiting for one of those requests, then it's unable to respond to the
> > > > RPC ping (which has a timeout of 10 seconds) generated by the rpcinfo
> > > > program.
> > > >
> > > > I ran into a similar scenario in the past where a client was launching
> > > > multiple instances of rpc.statd. When the client does a v3 mount it
> > > > does a similar RPC ping (with a more aggressive timeout) to see if
> > > > rpc.statd is running... if not then it calls out to
> > > > /usr/sbin/start-statd (which in the past simply called 'exec rpc.statd
> > > > --no-notify' but now has additional checks). Likewise rpc.statd does
> > > > it's own RPC ping to make sure there's not one already running. It
> > > > wound up that the user had a flakey DNS server and requests were taking
> > > > over 30 seconds to time out, thus thwarting all those additional checks,
> > > > and they wound up with multiple copies of rpc.statd running.
> > > >
> > > > You could be running into a similar scenario here and pacemaker could be
> > > > deciding that rpc.statd's not running when it's actually fine.
> > > >
> > > > -Scott
> > > >
> > > > > ---------------------------------------------------------------------------------------------------------------------------------------
> > > > > The script is scheduled to check every 20 seconds.
> > > > >
> > > > > This is the message we get in the logs -
> > > > > -------------------------------------------------------------------------------------------------------------------------------------
> > > > > Jul 09 07:33:56 virat-nd01 rpc.mountd[51641]: check_default: access by
> > > > > 127.0.0.1 ALLOWED
> > > > > Jul 09 07:33:56 virat-nd01 rpc.mountd[51641]: Received NULL request
> > > > > from 127.0.0.1
> > > > > Jul 09 07:33:56 virat-nd01 rpc.mountd[51641]: check_default: access by
> > > > > 127.0.0.1 ALLOWED (cached)
> > > > > Jul 09 07:33:56 virat-nd01 rpc.mountd[51641]: Received NULL request
> > > > > from 127.0.0.1
> > > > > Jul 09 07:33:56 virat-nd01 rpc.mountd[51641]: check_default: access by
> > > > > 127.0.0.1 ALLOWED (cached)
> > > > > Jul 09 07:33:56 virat-nd01 rpc.mountd[51641]: Received NULL request
> > > > > from 127.0.0.1
> > > > > -------------------------------------------------------------------------------------------------------------------------------------
> > > > >
> > > > > After 10 seconds, we get his message -
> > > > > -------------------------------------------------------------------------------------------------------------------------------------
> > > > > Jul 09 07:34:09 virat-nd01 nfsserver(virat-nfs-daemon)[54087]: ERROR:
> > > > > rpc-statd is not running
> > > > > -------------------------------------------------------------------------------------------------------------------------------------
> > > > > Once we get this error, the NFS service is automatically restarted.
> > > > >
> > > > > "ERROR: rpc-statd is not running" message is from the pacemaker's
> > > > > monitoring script.
> > > > > I have pasted that part of the script below.
> > > > >
> > > > > I disabled monitoring and everything is working fine, since then.
> > > > >
> > > > > I cant keep the cluster monitoring disabled forever.
> > > > >
> > > > > Kindly help.
> > > > >
> > > > > Regards,
> > > > >
> > > > >
> > > > > Indivar Nair
> > > > >
> > > > > Part of the pacemaker script that does the monitoring
> > > > > (/usr/lib/ocf/resources.d/heartbeat/nfsserver)
> > > > > =======================================================================
> > > > > nfsserver_systemd_monitor()
> > > > > {
> > > > > local threads_num
> > > > > local rc
> > > > > local fn
> > > > >
> > > > > ocf_log debug "Status: rpcbind"
> > > > > rpcinfo > /dev/null 2>&1
> > > > > rc=$?
> > > > > if [ "$rc" -ne "0" ]; then
> > > > > ocf_exit_reason "rpcbind is not running"
> > > > > return $OCF_NOT_RUNNING
> > > > > fi
> > > > >
> > > > > ocf_log debug "Status: nfs-mountd"
> > > > > rpcinfo -t localhost 100005 > /dev/null 2>&1
> > > > > rc=$?
> > > > > if [ "$rc" -ne "0" ]; then
> > > > > ocf_exit_reason "nfs-mountd is not running"
> > > > > return $OCF_NOT_RUNNING
> > > > > fi
> > > > >
> > > > > ocf_log debug "Status: nfs-idmapd"
> > > > > fn=`mktemp`
> > > > > nfs_exec status nfs-idmapd > $fn 2>&1
> > > > > rc=$?
> > > > > ocf_log debug "$(cat $fn)"
> > > > > rm -f $fn
> > > > > if [ "$rc" -ne "0" ]; then
> > > > > ocf_exit_reason "nfs-idmapd is not running"
> > > > > return $OCF_NOT_RUNNING
> > > > > fi
> > > > >
> > > > > ocf_log debug "Status: rpc-statd"
> > > > > rpcinfo -t localhost 100024 > /dev/null 2>&1
> > > > > rc=$?
> > > > > if [ "$rc" -ne "0" ]; then
> > > > > ocf_exit_reason "rpc-statd is not running"
> > > > > return $OCF_NOT_RUNNING
> > > > > fi
> > > > >
> > > > > nfs_exec is-active nfs-server
> > > > > rc=$?
> > > > >
> > > > > # Now systemctl is-active can't detect the failure of kernel
> > > > > process like nfsd.
> > > > > # So, if the return value of systemctl is-active is 0, check the
> > > > > threads number
> > > > > # to make sure the process is running really.
> > > > > # /proc/fs/nfsd/threads has the numbers of the nfsd threads.
> > > > > if [ $rc -eq 0 ]; then
> > > > > threads_num=`cat /proc/fs/nfsd/threads 2>/dev/null`
> > > > > if [ $? -eq 0 ]; then
> > > > > if [ $threads_num -gt 0 ]; then
> > > > > return $OCF_SUCCESS
> > > > > else
> > > > > return 3
> > > > > fi
> > > > > else
> > > > > return $OCF_ERR_GENERIC
> > > > > fi
> > > > > fi
> > > > >
> > > > > return $rc
> > > > > }
> > > > > =======================================================================
