Re: [PATCH v4 02/11] VFS: copy_file_range check validity of input source offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 31, 2018 at 10:51:48AM -0400, Olga Kornievskaia wrote:
> On Tue, Oct 30, 2018 at 8:15 PM Dave Chinner <david@xxxxxxxxxxxxx> wrote:
> >
> > On Tue, Oct 30, 2018 at 05:10:58PM -0400, Olga Kornievskaia wrote:
> > > On Tue, Oct 30, 2018 at 5:03 AM Dave Chinner <david@xxxxxxxxxxxxx> wrote:
> > > >
> > > > On Mon, Oct 29, 2018 at 10:41:22AM -0400, Olga Kornievskaia wrote:
> > > > > On Sat, Oct 27, 2018 at 5:27 AM Dave Chinner <david@xxxxxxxxxxxxx> wrote:
> > > > > >
> > > > > > On Fri, Oct 26, 2018 at 04:10:48PM -0400, Olga Kornievskaia wrote:
> > > > > > > From: Olga Kornievskaia <kolga@xxxxxxxxxx>
> > > > > > >
> > > > > > > Input source offset can't be beyond the end of the file.
> > > > > > >
> > > > > > > Signed-off-by: Olga Kornievskaia <kolga@xxxxxxxxxx>
> > > > > > > ---
> > > > > > >  fs/read_write.c | 3 +++
> > > > > > >  1 file changed, 3 insertions(+)
> > > > > > >
> > > > > > > diff --git a/fs/read_write.c b/fs/read_write.c
> > > > > > > index fb4ffca..b3b304e 100644
> > > > > > > --- a/fs/read_write.c
> > > > > > > +++ b/fs/read_write.c
> > > > > > > @@ -1594,6 +1594,9 @@ ssize_t vfs_copy_file_range(struct file *file_in, loff_t pos_in,
> > > > > > >               }
> > > > > > >       }
> > > > > > >
> > > > > > > +     if (pos_in >= i_size_read(inode_in))
> > > > > > > +             return -EINVAL;
> > > > > > > +
> > > > > >
> > > > > > vfs_copy_file_range seems ot be missing a wide range of checks.
> > > > > > rlimit, s_maxbytes, LFS file sizes, etc. This is a write, so all the
> > > > > > checks in generic_write_checks() apply, right? And the same security
> > > > > > issues like stripping setuid bits, etc? And we need to touch
> > > > > > atime on the source file, too?
> > > > >
> > > > > Yes sound like needed checks.
> > > > >
> > > > > > We've just merged 5 or so patches in 4.19-rc8 and we're ready to
> > > > > > merge another ~30 patch series to fix all the stuff missing from the
> > > > > > clone/dedupe file range operations that make them safe and robust.
> > > > > > It seems like copy_file_range is all the checks it needs, too?
> > > > >
> > > > > Are you proposing to not do this check now in favor of the proper work
> > > > > that will do all of those checks you listed above?
> > > >
> > > > No, I'm saying that if you're adding one check, there's a whole heap
> > > > of checks that still need to be added, *especially* if this is going
> > > > to fall back to page cache copy between superblocks that may have
> > > > different limits and constraints.
> > > >
> > > > There's security issues in this API. They need to be fixed before we
> > > > allow it to do more and potentially expose more problems due to it's
> > > > wider capability.
> > >
> > > Before I totally give up on this feature, can you help me understand
> > > your concerns with allowing the generic copy_file_range via
> > > do_splice().
> >
> > it's not do_splice_direct() i'm concerned about. It's /writing data
> > without adequate checks/ that I'm concerned about.
> > ->copy_file_range() also writes data, so it needs to undergo the
> > same safety checks as well.
> 
> Thank you Dave for clarifying and elaborating on the points. As you
> pointed out this concerns apply to the current code the same way as to
> the patch series. Those concerns should be address however I feel like
> they shouldn't be the responsibility of this particular patch series.
> Therefore, I ask for the community to either make any final comments
> for any changes that are needed to "version 7" patches and if no more
> comments arise I would like to ask for this to be added to the queue
> for the next kernel version.
> 
> Then the next patch series would be just VFS and would add appropriate
> checks and then allow for the generic copy_file_range() via do_splice.

That's fine by me.

> 
> > > I have mentioned I'm not a VFS expert thus I come from just looking at
> > > the available documentation and the code.
> > >
> > > I don't see any restrictions on the files being passed in the
> > > do_splice_direct(). There are no restrictions that they must be from
> > > the same filesystem or file system type. But perhaps this not the
> > > concern you had but more about checking validity of arguments?
> > >
> > > I have looked at Dave Wong's, if I'm not mistaken these 2 are the
> > > relevant patches:
> > > [PATCH 02/28] vfs: check file ranges before cloning files
> > >  -- a couple but not all checks apply to copy_file_range() .
> >
> > Yes, of course - clone/dedupe have different constraints, but the
> > core checks are still needed for copy_file_range().
> >
> > For example, the man page says:
> >
> > EINVAL
> >         Requested range extends beyond the end of the source
> >         file; or the flags argument is not 0.
> >
> > Your patch above doesn't actually check that - it only checks if the
> > pos_in is beyond EOF. It needs to check if pos_in + len is beyond
> > EOF. After checking for wraps, of course.
> 
> There was a reason why I didn't include the "pos_in + len" check. It
> sparked the conversation why should "pos_in + len" be an error, when a
> "read" system call would just return a "short" read and EOF. So I
> dropped the check for "pst_in + len" to be an error.

So man page patches will be required, too. :)

Basically, we need to nail down the expected semantics, make sure
they are correctly documented and /enforced consistently/ across all
filesystems.


> > >  -- these checks apply to the code once we fall back to the
> > > do_splice().
> >
> > man page says:
> >
> > EFBIG
> >        An  attempt  was made to write a file that exceeds the
> >        implementation-defined maximum file size or the process's
> >        file size limit, or to write at a position past the maximum
> >        allowed offset.
> >
> > These conditions apply to the destination file regards of the method
> > used to copy the data. That's what the generic methods now check for
> > clone/dedupe, and need to be used here, too.
> 
> Agreed and once Darrek patches are in, copy_file_range() can use them too.

Should be in the next couple of days.

> > 7debbf015f58 xfs: update ctime and remove suid before cloning files
> >
> > Which then got moved into the generic remap_file_range code in
> > Darrick's "vfs: remap helper should update destination inode
> > metadata" patch:
> >
> > https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git/commit/?h=for-next&id=8dde90bca6fca3736ea20109654bcf6dcf2ecf1d
> >
> > We can't assume that a server side copy is going to strip setuid
> > bits or even update target files c/mtimes.
> 
> I would like to discuss your concerns about updating attributes
> (c/m/atimes), why shouldn't it be a ->copy_file_range()
> responsibility. copy_file_rage is basically a read+write. As far as I
> can tell, vfs_read and vfs_write (in VFS) don't deal with updating
> attributes.

You're looking at the wrong level. The VFS layer is the first
multiplexing layer, allowing filesystems to select a method of
handling functionality. They then make use of "generic helpers"
to implement the required functionality, and they contain the
required updates.

ie.g. A list of generic helpers with atime update callers from my
cscope index:

f fs/pipe.c          pipe_read                   343 file_accessed(filp);
h fs/readdir.c       iterate_dir                  56 file_accessed(file);
i fs/splice.c        generic_file_splice_read    311 file_accessed(in);
j fs/splice.c        splice_direct_to_actor      992 file_accessed(in);
p mm/filemap.c       generic_file_buffered_read 2299 file_accessed(filp);
q mm/filemap.c       generic_file_read_iter     2339 file_accessed(file);
r mm/filemap.c       generic_file_mmap          2736 file_accessed(file);

These are effectively reference implementations of the file reading
infrastructure. Filesystems often have customised implementations
but they all must contain the same functioanlity and behaviour as
the reference implementation.

> I'm guessing it's assumed that underlying file systems are
> going to take care of it (unless of course I misread the code).

Only the ones that don't specifically call the generic helper to do
the work.

IOWs, what I'd like to see is a generic_copy_file_range() as the
reference implemenation using a page cache copy. This contains all
the required checks, timestamp updates, etc. If the filesystem does
not supply ->copy_file_range, then generic_copy_file_range() is
called, not do_splice_direct(). Indeed, a filesystem should be able
to do:

	.copy_file_range = xfs_copy_file_range,

xfs_copy_file_range(...)
{
	trace_xfs_copy_file_range(...)
	return generic_copy_file_range(....);
}

and have everything work correctly.

Cheers,

Dave.
-- 
Dave Chinner
david@xxxxxxxxxxxxx



[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux