Re: [PATCH v1 9/8] copy_file_range.2: New page documenting copy_file_range()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 09, 2015 at 07:38:14AM -0400, Austin S Hemmelgarn wrote:
> On 2015-09-08 16:39, Darrick J. Wong wrote:
> >On Tue, Sep 08, 2015 at 11:04:03AM -0400, Anna Schumaker wrote:
> >>On 09/04/2015 05:38 PM, Darrick J. Wong wrote:
> >>>On Fri, Sep 04, 2015 at 04:17:03PM -0400, Anna Schumaker wrote:
> >>>>copy_file_range() is a new system call for copying ranges of data
> >>>>completely in the kernel.  This gives filesystems an opportunity to
> >>>>implement some kind of "copy acceleration", such as reflinks or
> >>>>server-side-copy (in the case of NFS).
> >>>>
> >>>>Signed-off-by: Anna Schumaker <Anna.Schumaker@xxxxxxxxxx>
> >>>>---
> >>>>  man2/copy_file_range.2 | 168 +++++++++++++++++++++++++++++++++++++++++++++++++
> >>>>  1 file changed, 168 insertions(+)
> >>>>  create mode 100644 man2/copy_file_range.2
> >>>>
> >>>>diff --git a/man2/copy_file_range.2 b/man2/copy_file_range.2
> >>>>new file mode 100644
> >>>>index 0000000..4a4cb73
> >>>>--- /dev/null
> >>>>+++ b/man2/copy_file_range.2
> >>>>@@ -0,0 +1,168 @@
> >>>>+.\"This manpage is Copyright (C) 2015 Anna Schumaker <Anna.Schumaker@xxxxxxxxxx>
> >>>>+.TH COPY 2 2015-8-31 "Linux" "Linux Programmer's Manual"
> >>>>+.SH NAME
> >>>>+copy_file_range \- Copy a range of data from one file to another
> >>>>+.SH SYNOPSIS
> >>>>+.nf
> >>>>+.B #include <linux/copy.h>
> >>>>+.B #include <sys/syscall.h>
> >>>>+.B #include <unistd.h>
> >>>>+
> >>>>+.BI "ssize_t syscall(__NR_copy_file_range, int " fd_in ", loff_t * " off_in ",
> >>>>+.BI "                int " fd_out ", loff_t * " off_out ", size_t " len ",
> >>>>+.BI "                unsigned int " flags );
> >>>>+.fi
> >>>>+.SH DESCRIPTION
> >>>>+The
> >>>>+.BR copy_file_range ()
> >>>>+system call performs an in-kernel copy between two file descriptors
> >>>>+without all that tedious mucking about in userspace.
> >>>
> >>>;)
> >>>
> >>>>+It copies up to
> >>>>+.I len
> >>>>+bytes of data from file descriptor
> >>>>+.I fd_in
> >>>>+to file descriptor
> >>>>+.I fd_out
> >>>>+at
> >>>>+.IR off_out .
> >>>>+The file descriptors must not refer to the same file.
> >>>
> >>>Why?  btrfs (and XFS) reflink can handle the case of a file sharing blocks
> >>>with itself.
> >>
> >>I've never really thought about it... Zach had that in his initial
> >>submission, so mentioned it in the man page.  Should I remove that bit?
> >
> >Yes, please!
> >
> >I could be wrong, but I think btrfs only started supporting files that share
> >blocks with themselves relatively recently(?)
> >
> >I'm not sure why zab added this; was hoping he'd speak up. ;)
> >
> >>
> >>>
> >>>>+
> >>>>+The following semantics apply for
> >>>>+.IR fd_in ,
> >>>>+and similar statements apply to
> >>>>+.IR off_out :
> >>>>+.IP * 3
> >>>>+If
> >>>>+.I off_in
> >>>>+is NULL, then bytes are read from
> >>>>+.I fd_in
> >>>>+starting from the current file offset and the current
> >>>>+file offset is adjusted appropriately.
> >>>>+.IP *
> >>>>+If
> >>>>+.I off_in
> >>>>+is not NULL, then
> >>>>+.I off_in
> >>>>+must point to a buffer that specifies the starting
> >>>>+offset where bytes from
> >>>>+.I fd_in
> >>>>+will be read.  The current file offset of
> >>>>+.I fd_in
> >>>>+is not changed, but
> >>>>+.I off_in
> >>>>+is adjusted appropriately.
> >>>>+.PP
> >>>>+The default behavior of
> >>>>+.BR copy_file_range ()
> >>>>+is filesystem specific, and might result in creating a
> >>>>+copy-on-write reflink.
> >>>>+In the event that a given filesystem does not implement
> >>>>+any form of copy acceleration, the kernel will perform
> >>>>+a deep copy of the requested range by reading bytes from
> >>>
> >>>I wonder if it's wise to allow deep copies -- what happens if len == 1T?
> >>>Will this syscall just block for a really long time?
> >>
> >>We use rw_verify_area(), (similar to read and write) so we won't allow a
> >>value of len that long.  I can mention this in an updated version of this man
> >>page!
> >
> >Ok.  I guess MAX_RW_COUNT limits us to about 4G at once, which for a splice

Heh, INT_MAX, so 2GB at once.

> >copy is probably reasonable.
> >
> >The reason why I asked about len == 1T specifically is that I can (with
> >somewhat long delays) reflink about 260 million extents at a time on XFS,
> >which is about 1TB.  Given that locks get held for the duration, it's probably
> >not a bad thing to limit userspace to 4G at a time.
>
> I'd personally love to see that be tunable by a sysctl (kind of like
> how you can control the maximum number of AIO requests in flight),
> and for that matter we might want to be able to limit the number of
> in-progress copies going on.

Now that I think about it, btrfs' reflink ioctl doesn't seem to have any
particular limit on how much you can reflink in a single call.  XFS doesn't
have a limit either.  Given that reflink should create a tiny amount of IO
compared to the number of bytes being manipulated, should we allow a higher
limit when ssize_t is large enough?

Copy-through-the-pagecache should stick to MAX_RW_COUNT.

I noticed that btrfs won't dedupe more than 16M per call.  Any thoughts?

--D

> >
> >(But hey, it's fun to stress-test once in a while. :))
> >
> >--D
> >
> >>
> >>
> >>>
> >>>>+.I fd_in
> >>>>+and writing them to
> >>>>+.IR fd_out .
> >>>
> >>>"...if COPY_REFLINK is not set in flags."
> >>
> >>Sure.
> >>
> >>>
> >>>>+
> >>>>+Currently, Linux only supports the following flag:
> >>>>+.TP 1.9i
> >>>>+.B COPY_REFLINK
> >>>>+Only perform the copy if the filesystem can do it as a reflink.
> >>>>+Do not fall back on performing a deep copy.
> >>>>+.SH RETURN VALUE
> >>>>+Upon successful completion,
> >>>>+.BR copy_file_range ()
> >>>>+will return the number of bytes copied between files.
> >>>>+This could be less than the length originally requested.
> >>>>+
> >>>>+On error,
> >>>>+.BR copy_file_range ()
> >>>>+returns \-1 and
> >>>>+.I errno
> >>>>+is set to indicate the error.
> >>>>+.SH ERRORS
> >>>>+.TP
> >>>>+.B EBADF
> >>>>+One or more file descriptors are not valid,
> >>>>+or do not have proper read-write mode.
> >>>
> >>>"or fd_out is not opened for writing"?
> >>
> >>I'll add that.
> >>
> >>>
> >>>>+.TP
> >>>>+.B EINVAL
> >>>>+Requested range extends beyond the end of the file;
> >>>>+.I flags
> >>>>+argument is set to an invalid value.
> >>>>+.TP
> >>>>+.B EOPNOTSUPP
> >>>>+.B COPY_REFLINK
> >>>>+was specified in
> >>>>+.IR flags ,
> >>>>+but the target filesystem does not support reflinks.
> >>>>+.TP
> >>>>+.B EXDEV
> >>>>+Target filesystem doesn't support cross-filesystem copies.
> >>>>+.SH VERSIONS
> >>>
> >>>Perhaps this ought to list a few more errors (EIO, ENOSPC, ENOSYS, EPERM...)
> >>>that can be returned?  (I was looking at the fallocate manpage.)
> >>
> >>Okay.  I'll poke around for what else could be returned!
> >>
> >>Thanks,
> >>Anna
> >>
> >>>
> >>>--D
> >>>
> >>>>+The
> >>>>+.BR copy_file_range ()
> >>>>+system call first appeared in Linux 4.3.
> >>>>+.SH CONFORMING TO
> >>>>+The
> >>>>+.BR copy_file_range ()
> >>>>+system call is a nonstandard Linux extension.
> >>>>+.SH EXAMPLE
> >>>>+.nf
> >>>>+
> >>>>+#define _GNU_SOURCE
> >>>>+#include <fcntl.h>
> >>>>+#include <linux/copy.h>
> >>>>+#include <stdio.h>
> >>>>+#include <stdlib.h>
> >>>>+#include <sys/stat.h>
> >>>>+#include <sys/syscall.h>
> >>>>+#include <unistd.h>
> >>>>+
> >>>>+
> >>>>+int main(int argc, char **argv)
> >>>>+{
> >>>>+    int fd_in, fd_out;
> >>>>+    struct stat stat;
> >>>>+    loff_t len, ret;
> >>>>+
> >>>>+    if (argc != 3) {
> >>>>+        fprintf(stderr, "Usage: %s <pathname> <pathname>\n", argv[0]);
> >>>>+        exit(EXIT_FAILURE);
> >>>>+    }
> >>>>+
> >>>>+    fd_in = open(argv[1], O_RDONLY);
> >>>>+    if (fd_in == -1) {
> >>>>+        perror("open (argv[1])");
> >>>>+        exit(EXIT_FAILURE);
> >>>>+    }
> >>>>+
> >>>>+    if (fstat(fd_in, &stat) == -1) {
> >>>>+        perror("fstat");
> >>>>+        exit(EXIT_FAILURE);
> >>>>+    }
> >>>>+    len = stat.st_size;
> >>>>+
> >>>>+    fd_out = open(argv[2], O_WRONLY | O_CREAT, 0644);
> >>>>+    if (fd_out == -1) {
> >>>>+        perror("open (argv[2])");
> >>>>+        exit(EXIT_FAILURE);
> >>>>+    }
> >>>>+
> >>>>+    do {
> >>>>+        ret = syscall(__NR_copy_file_range, fd_in, NULL,
> >>>>+                      fd_out, NULL, len, 0);
> >>>>+        if (ret == -1) {
> >>>>+            perror("copy_file_range");
> >>>>+            exit(EXIT_FAILURE);
> >>>>+        }
> >>>>+
> >>>>+        len -= ret;
> >>>>+    } while (len > 0);
> >>>>+
> >>>>+    close(fd_in);
> >>>>+    close(fd_out);
> >>>>+    exit(EXIT_SUCCESS);
> >>>>+}
> >>>>+.fi
> >>>>+.SH SEE ALSO
> >>>>+.BR splice (2)
> >>>>--
> >>>>2.5.1
> >>>>
> >>>>--
> >>>>To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
> >>>>the body of a message to majordomo@xxxxxxxxxxxxxxx
> >>>>More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >>
> >--
> >To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
> >the body of a message to majordomo@xxxxxxxxxxxxxxx
> >More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux