Re: [PATCH 3/4] sunrpc: if we're closing down a socket, clear memalloc on it first

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 03, 2015 at 10:32:00AM -0400, Jeff Layton wrote:
> On Tue, 2 Jun 2015 13:40:26 +0100
> Mel Gorman <mgorman@xxxxxxx> wrote:
> 
> > On Sat, May 30, 2015 at 08:03:12AM -0400, Jeff Layton wrote:
> > > We currently increment the memalloc_socks counter if we have a xprt that
> > > is associated with a swapfile. That socket can be replaced however
> > > during a reconnect event, and the memalloc_socks counter is never
> > > decremented if that occurs.
> > > 
> > > When tearing down a xprt socket, check to see if the xprt is set up for
> > > swapping and sk_clear_memalloc before releasing the socket if so.
> > > 
> > > Cc: Mel Gorman <mgorman@xxxxxxx>
> > > Signed-off-by: Jeff Layton <jeff.layton@xxxxxxxxxxxxxxx>
> > 
> > Acked-by: Mel Gorman <mgorman@xxxxxxx>
> > 
> 
> Thanks Mel,
> 
> I should also mention that I see this warning pop when working with
> swapfiles on NFS. This trace is with this patchset, but I see a similar
> one without it:
> 
> [   74.232485] ------------[ cut here ]------------
> [   74.233354] WARNING: CPU: 2 PID: 754 at net/core/sock.c:364 sk_clear_memalloc+0x51/0x80()
> [   74.234790] Modules linked in: cts rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xfs libcrc32c snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device nfsd snd_pcm snd_timer snd e1000 ppdev parport_pc joydev parport pvpanic soundcore floppy serio_raw i2c_piix4 pcspkr nfs_acl lockd virtio_balloon acpi_cpufreq auth_rpcgss grace sunrpc qxl drm_kms_helper ttm drm virtio_console virtio_blk virtio_pci ata_generic virtio_ring pata_acpi virtio
> [   74.243599] CPU: 2 PID: 754 Comm: swapoff Not tainted 4.1.0-rc6+ #5
> [   74.244635] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> [   74.245546]  0000000000000000 0000000079e69e31 ffff8800d066bde8 ffffffff8179263d
> [   74.246786]  0000000000000000 0000000000000000 ffff8800d066be28 ffffffff8109e6fa
> [   74.248175]  0000000000000000 ffff880118d48000 ffff8800d58f5c08 ffff880036e380a8
> [   74.249483] Call Trace:
> [   74.249872]  [<ffffffff8179263d>] dump_stack+0x45/0x57
> [   74.250703]  [<ffffffff8109e6fa>] warn_slowpath_common+0x8a/0xc0
> [   74.251655]  [<ffffffff8109e82a>] warn_slowpath_null+0x1a/0x20
> [   74.252585]  [<ffffffff81661241>] sk_clear_memalloc+0x51/0x80
> [   74.253519]  [<ffffffffa0116c72>] xs_disable_swap+0x42/0x80 [sunrpc]
> [   74.254537]  [<ffffffffa01109de>] rpc_clnt_swap_deactivate+0x7e/0xc0 [sunrpc]
> [   74.255610]  [<ffffffffa03e4fd7>] nfs_swap_deactivate+0x27/0x30 [nfs]
> [   74.256582]  [<ffffffff811e99d4>] destroy_swap_extents+0x74/0x80
> [   74.257496]  [<ffffffff811ecb52>] SyS_swapoff+0x222/0x5c0
> [   74.258318]  [<ffffffff81023f27>] ? syscall_trace_leave+0xc7/0x140
> [   74.259253]  [<ffffffff81798dae>] system_call_fastpath+0x12/0x71
> [   74.260158] ---[ end trace 2530722966429f10 ]---
> 
> ...that comes from this in sk_clear_memalloc:
> 
>         /*
>          * SOCK_MEMALLOC is allowed to ignore rmem limits to ensure forward
>          * progress of swapping. However, if SOCK_MEMALLOC is cleared while
>          * it has rmem allocations there is a risk that the user of the
>          * socket cannot make forward progress due to exceeding the rmem
>          * limits. By rights, sk_clear_memalloc() should only be called
>          * on sockets being torn down but warn and reset the accounting if
>          * that assumption breaks.
>          */
>         if (WARN_ON(sk->sk_forward_alloc))
>                 sk_mem_reclaim(sk);
> 
> Is it wrong to call sk_clear_memalloc on swapoff? Should we try to keep
> it set up as a memalloc socket on the last swapoff and just wait until
> the socket is being freed to clear it? If so, then maybe the right
> thing to do is to call sk_clear_memalloc in __sk_free or somewhere
> similar if it's set up for memalloc?
>

I think it is perfectly reasonable to remove the warning after your
series. When I had it in mind, I was primarily thinking of the shutdown
case and a single swap file. With your series applied, the disabling of
swap is called at the correct time. So, something like this to tack on
to the end of your series?

---8<---
net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap

Jeff Layton reported the following;

 [   74.232485] ------------[ cut here ]------------
 [   74.233354] WARNING: CPU: 2 PID: 754 at net/core/sock.c:364 sk_clear_memalloc+0x51/0x80()
 [   74.234790] Modules linked in: cts rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xfs libcrc32c snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device nfsd snd_pcm snd_timer snd e1000 ppdev parport_pc joydev parport pvpanic soundcore floppy serio_raw i2c_piix4 pcspkr nfs_acl lockd virtio_balloon acpi_cpufreq auth_rpcgss grace sunrpc qxl drm_kms_helper ttm drm virtio_console virtio_blk virtio_pci ata_generic virtio_ring pata_acpi virtio
 [   74.243599] CPU: 2 PID: 754 Comm: swapoff Not tainted 4.1.0-rc6+ #5
 [   74.244635] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 [   74.245546]  0000000000000000 0000000079e69e31 ffff8800d066bde8 ffffffff8179263d
 [   74.246786]  0000000000000000 0000000000000000 ffff8800d066be28 ffffffff8109e6fa
 [   74.248175]  0000000000000000 ffff880118d48000 ffff8800d58f5c08 ffff880036e380a8
 [   74.249483] Call Trace:
 [   74.249872]  [<ffffffff8179263d>] dump_stack+0x45/0x57
 [   74.250703]  [<ffffffff8109e6fa>] warn_slowpath_common+0x8a/0xc0
 [   74.251655]  [<ffffffff8109e82a>] warn_slowpath_null+0x1a/0x20
 [   74.252585]  [<ffffffff81661241>] sk_clear_memalloc+0x51/0x80
 [   74.253519]  [<ffffffffa0116c72>] xs_disable_swap+0x42/0x80 [sunrpc]
 [   74.254537]  [<ffffffffa01109de>] rpc_clnt_swap_deactivate+0x7e/0xc0 [sunrpc]
 [   74.255610]  [<ffffffffa03e4fd7>] nfs_swap_deactivate+0x27/0x30 [nfs]
 [   74.256582]  [<ffffffff811e99d4>] destroy_swap_extents+0x74/0x80
 [   74.257496]  [<ffffffff811ecb52>] SyS_swapoff+0x222/0x5c0
 [   74.258318]  [<ffffffff81023f27>] ? syscall_trace_leave+0xc7/0x140
 [   74.259253]  [<ffffffff81798dae>] system_call_fastpath+0x12/0x71
 [   74.260158] ---[ end trace 2530722966429f10 ]---

The warning in question was unnecessary but with Jeff's series the rules
are also clearer.  This patch removes the warning and updates the comment
to explain why sk_mem_reclaim() may still be called.

Signed-off-by: Mel Gorman <mgorman@xxxxxxx>
---
 net/core/sock.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index 71e3e5f1eaa0..1ebf706b5847 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -354,14 +354,12 @@ void sk_clear_memalloc(struct sock *sk)
 
 	/*
 	 * SOCK_MEMALLOC is allowed to ignore rmem limits to ensure forward
-	 * progress of swapping. However, if SOCK_MEMALLOC is cleared while
-	 * it has rmem allocations there is a risk that the user of the
-	 * socket cannot make forward progress due to exceeding the rmem
-	 * limits. By rights, sk_clear_memalloc() should only be called
-	 * on sockets being torn down but warn and reset the accounting if
-	 * that assumption breaks.
+	 * progress of swapping. SOCK_MEMALLOC may be cleared while
+	 * it has rmem allocations due to the last swapfile being deactivated
+	 * but there is a risk that the socket is unusable due to exceeding
+	 * the rmem limits. Reclaim the reserves and obey rmem limits again.
 	 */
-	if (WARN_ON(sk->sk_forward_alloc))
+	if (sk->sk_forward_alloc)
 		sk_mem_reclaim(sk);
 }
 EXPORT_SYMBOL_GPL(sk_clear_memalloc);
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux