On May 2, 2014, at 3:27 PM, Doug Ledford <dledford@xxxxxxxxxx> wrote: > ----- Original Message ----- >> Changes since V2: >> >> - Rebased on v3.15-rc3 >> >> - "enable pad optimization" dropped. Testing showed Linux NFS/RDMA >> server does not support pad optimization yet. >> >> - "ALLPHYSICAL CONFIG" dropped. There is a lack of consensus on >> this one. Christoph would like ALLPHYSICAL removed, but the HPC >> community prefers keeping a performance-at-all-costs option. And, >> with most other registration modes now removed, ALLPHYSICAL is >> the mode of last resort if an adapter does not support FRMR or >> MTHCAFMR, since ALLPHYSICAL is universally supported. We will >> very likely revisit this later. I'm erring on the side of less >> churn and dropping this until the community agrees on how to >> move forward. >> >> - Added a patch to ensure there is always a valid ->qp if RPCs >> might awaken while the transport is disconnected. >> >> - Added a patch to clean up an MTU settings hack for a very old >> adapter model. >> >> Test and review the "nfs-rdma-client" branch: >> >> git://git.linux-nfs.org/projects/cel/cel-2.6.git >> >> Thanks! > > Hi Chuck, > > I've installed this in my cluster and ran a number of simple tests > over a variety of hardware. For the most part, it's looking much > better than NFSoRDMA looked a kernel or two back, but I can still > trip it up. All tests were run with rhel7 + current upstream > kernel. > > My server was using mlx4 hardware in both IB and RoCE modes. > > I tested from mlx4 client in both IB and RoCE modes -> not DOA > I tested from mlx5 client in IB mode -> not DOA > I tested from mthca client in IB mode -> not DOA > I tested from qib client in IB mode -> not DOA > I tested from ocrdma client in RoCE mode -> DOA (cpu soft lockup > on mount on the client) > > I tested nfsv3 -> not DOA > I tested nfsv4 + rdma -> still DOA, but I think this is expected > as last I knew someone needs to write code for nfsv4 mountd > over rdma before this will work (as nfsv3 uses a tcp connection > to do mounting, and then switches to rdma for data transfers > and nfsv4 doesn't support that or something like that...this > is what I recall Jeff Layton telling me anyway) > > I tested nfsv3 in both IB and RoCE modes with rsize=32768 and > wsize=32768 -> not DOA, reliable, did data verification and passed > > I tested nfsv3 in both IB and RoCE modes with rsize=65536 and > wsize=65536 -> not DOA, but not reliable either, data transfers > will stop after a certain amount has been transferred and the > mount will have a soft hang Can you clarify what you mean by “soft hang?” Are you seeing a problem when mounting with the “soft” mount option, or does this mean “CPU soft lockup?” (INFO: task hung for 120 seconds) > My data verification was simple (but generally effective in > lots of scenarios): > > I had a full linux kernel git repo, with a complete build in it > (totaling a little over 9GB of disk space used) and I would run > tar -cf - linus | tar -xvf - -C <tmpdir> to copy the tree > around (I did copies both on the same mount and on a different > mount that was also NFSoRDMA, including copying from an IB > NFSoRDMA mount to a RoCE NFSoRDMA mount on different mlx4 ports), > and then diff -uprN on the various tree locations to check for > any data differences. > > So there's your testing report. As I said in the beginning, it's > definitely better than it was since it used to oops the server and > I didn't encounter any server side problems this time, only client > side problems. Thanks for testing! > ToDo items that I see: > > Write NFSv4 rdma protocol mount support NFSv4 does not use the MNT protocol. If NFSv4 is not working for you, there’s something else going on. For me NFSv4 works as well as NFSv3. Let me know if you need help troubleshooting. > Fix client soft mount hangs when rsize/wsize > 32768 Does that problem occur with unpatched v3.15-rc3 on the client? HCAs/RNICs that support MTHCAFMR and FRMR should be working up to the largest rsize and wsize supported by the client and server. When I use ALLPHYSICAL with large wsize, typically the server starts dropping NFS WRITE requests. The client retries them forever, and that looks like a mount point hang. Something like https://bugzilla.linux-nfs.org/show_bug.cgi?id=248 > Fix DOA of ocrdma driver Does that problem occur with unpatched v3.15-rc3 on the client? Emulex has reported some problems when reconnecting, but I haven’t heard of issues that occur right at mount time. -- Chuck Lever chuck[dot]lever[at]oracle[dot]com -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
