On Oct 17, 2013, at 11:42 AM, Anna Schumaker <schumaker.anna@xxxxxxxxx> wrote:
> On Thu 17 Oct 2013 11:26:35 AM EDT, Weston Andros Adamson wrote:
>> On Oct 17, 2013, at 10:47 AM, Anna Schumaker <schumaker.anna@xxxxxxxxx> wrote:
>>
>>> On Wed 16 Oct 2013 03:35:12 PM EDT, Weston Andros Adamson wrote:
>>>> This script tests the nfs 'sec=' mount option against a server with
>>>> (possibly) many different exports with different security flavors.
>>>>
>>>> I originally wrote this to test the patch to test my multiple sec= options
>>>> patch, so set TEST_MULTIPLE_SEC_OPTIONS to something other than "true" to test
>>>> older kernels.
>>>>
>>>> Most of the config can be passed through as environment variables, but the
>>>> paths on the remote server and the function to map these paths to the allowed
>>>> security flavors is not and must be set to what exports the server has defined.
>>>
>>> What are the benefits to passing the config through environment
>>> variables instead of using command line parameters (getopt or similar)?
>>>
>>> Anna
>>
>> Well, the main benefit is that it's already written and both solutions are functionally equivalent.
>>
>> The reason I went with environment variables over using command line arguments is that some of the config cannot be passed easily as either - the server's export list and mapping to security flavors must be specified by editing the script (I *guess* you could pass a function/script that maps these but… ewww). The jenkins use of the script can just assume a standard export mapping, but when run by hand the user will probably need to update these. If there are command line arguments and a usage() error path it would lead users to believe that's how the script is intended to run, but it is not.
>>
>> So, passing any arguments to this script is a hack for jenkins. It's ok since you control the exports on the server(s) for the jenkins setup, but for stand-alone use (one of the goals in sharing this script) it makes little sense.
>
> Fair enough.
>
>>
>> Why does this matter to you? FYI, you don't need getopt with shell scripts, you can instead use $[0-9] (see also "shift" and $#). If you must pass as command line arguments, just write a little wrapper.
>
> I was just curious. I've been using getopt since I think it makes
> running scripts over ssh a bit easier to debug, but we can keep it this
> way. Thanks for the patch!
>
> Anna
Oh I think understand what you meant about getopt - you'd like (short and/or long) named variables. That leads to another reason not to do it: most of the script would then be parsing and setting options, but oh by the way you still have to manually edit the script.
I think you should just call "env SERVER=<server> VERSION=<version> $PATH_TO_UTIL_DIR/test_sec_options.sh" or something similar.
-dros
>>
>> -dros
>>
>>>
>>>>
>>>> This should be useful as a stand-alone script and as well as a Jenkins test.
>>>>
>>>> Signed-off-by: Weston Andros Adamson <dros@xxxxxxxxxx>
>>>> ---
>>>> helper/test_sec_options.sh | 289 +++++++++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 289 insertions(+)
>>>> create mode 100755 helper/test_sec_options.sh
>>>>
>>>> diff --git a/helper/test_sec_options.sh b/helper/test_sec_options.sh
>>>> new file mode 100755
>>>> index 0000000..10b01f4
>>>> --- /dev/null
>>>> +++ b/helper/test_sec_options.sh
>>>> @@ -0,0 +1,289 @@
>>>> +#!/bin/sh
>>>> +# Copyright (c) 2013 Netapp, Inc. All rights reserved
>>>> +#
>>>> +# test_sec_options.sh - test NFS mount security options
>>>> +# by: Weston Andros Adamson <dros@xxxxxxxxxx>
>>>> +#
>>>> +
>>>> +#
>>>> +# The example config is for a server (zero) with this /etc/exports:
>>>> +#
>>>> +# /export/sys *(sec=sys,rw,no_root_squash)
>>>> +# /export/krb5a *(sec=krb5,rw,no_root_squash)
>>>> +# /export/krb5i *(sec=krb5i,rw,no_root_squash)
>>>> +# /export/krb5p *(sec=krb5p,rw,no_root_squash)
>>>> +# /export/krb5ip *(sec=krb5i:krb5p,rw,no_root_squash)
>>>> +# /export/krb5aip *(sec=krb5:krb5i:krb5p,rw,no_root_squash)
>>>> +#
>>>> +
>>>> +# the server to mount
>>>> +[ -z "$SERVER" ] && SERVER=zero.apikia.fake
>>>> +
>>>> +# local mountpoint
>>>> +[ -z "$LOCALDIR" ] && LOCALDIR=/mnt
>>>> +
>>>> +# exports on the server to test - if you add something here, you MUST
>>>> +# add an entry to path_to_sec_flavors
>>>> +PATHS="/export/sys /export/krb5a /export/krb5i /export/krb5p /export/krb5ip /export/krb5aip"
>>>> +
>>>> +# mapping of path -> space separated list of sec= options
>>>> +path_to_sec_flavors() {
>>>> + case $1 in
>>>> + /export/sys) echo "sys"
>>>> + ;;
>>>> + /export/krb5a) echo "krb5"
>>>> + ;;
>>>> + /export/krb5i) echo "krb5i"
>>>> + ;;
>>>> + /export/krb5p) echo "krb5p"
>>>> + ;;
>>>> + /export/krb5ip) echo "krb5i krb5p"
>>>> + ;;
>>>> + /export/krb5aip) echo "krb5 krb5i krb5p"
>>>> + ;;
>>>> + esac
>>>> +}
>>>> +
>>>> +# test multiple sec= options too?
>>>> +[ -z "$TEST_MULTIPLE_SEC_OPTIONS" ] && TEST_MULTIPLE_SEC_OPTIONS=true
>>>> +
>>>> +# if defined will pause for $RUN_PAUSE seconds between each run
>>>> +[ -z "$RUN_PAUSE" ] && RUN_PAUSE=0.25
>>>> +
>>>> +[ -z "$GROUP_PAUSE" ] && GROUP_PAUSE=10
>>>> +
>>>> +[ -z "$VERSIONS" ] && VERSIONS="v3 v4.0 v4.1"
>>>> +
>>>> +##### END CONFIG ####
>>>> +
>>>> +# no v2 or v3
>>>> +VERSIONS_V4=$(echo $VERSIONS | sed 's/v[2-3][^ ]*//g')
>>>> +
>>>> +echo "SERVER = $SERVER"
>>>> +echo "PATHS = $PATHS"
>>>> +echo "LOCALDIR = $LOCALDIR"
>>>> +echo "VERSIONS = $VERSIONS"
>>>> +echo "VERSIONS_V4 = $VERSIONS_V4"
>>>> +echo "TEST_MULTIPLE_SEC_OPTIONS = $TEST_MULTIPLE_SEC_OPTIONS"
>>>> +echo "RUN_PAUSE = $RUN_PAUSE"
>>>> +echo "GROUP_PAUSE = $GROUP_PAUSE"
>>>> +
>>>> +SINGLE_SEC_OPTIONS="sys krb5 krb5i krb5p"
>>>> +MULTIPLE_SEC_OPTIONS="sys krb5 krb5i krb5p sys:krb5 sys:krb5i sys:krb5p sys:krb5:krb5i sys:krb5:krb5p sys:krb5i:krb5p krb5:krb5i krb5:krb5p krb5:krb5i:krb5p krb5i:krb5p sys:krb5:krb5i:krb5p"
>>>> +
>>>> +FAILURES=0
>>>> +SUCCESSES=0
>>>> +
>>>> +group_pause() {
>>>> + if [ -n "$GROUP_PAUSE" -a "$GROUP_PAUSE" != "0" ] ; then
>>>> + echo sleeping for $GROUP_PAUSE seconds...
>>>> + sleep $GROUP_PAUSE
>>>> + fi
>>>> +}
>>>> +
>>>> +has_mount() {
>>>> + _res=$(mount | grep $LOCALDIR | grep nfs)
>>>> +
>>>> + if [ -n "$_res" ] ; then
>>>> + return 0
>>>> + fi
>>>> +
>>>> + return 1
>>>> +}
>>>> +
>>>> +if has_mount ; then
>>>> + echo "something else mounted on $LOCALDIR"
>>>> + exit 1
>>>> +fi
>>>> +
>>>> +_cancel() {
>>>> + echo
>>>> + echo "exiting on SIGINT"
>>>> + while has_mount ; do
>>>> + sudo umount $LOCALDIR > /dev/null 2>&1
>>>> + done
>>>> + exit 1
>>>> +}
>>>> +
>>>> +splitsec() {
>>>> + echo $* | tr -s ':' ' '
>>>> +}
>>>> +
>>>> +trap '_cancel' INT
>>>> +
>>>> +run() {
>>>> + _opts="$1"
>>>> + _server="$2"
>>>> + _path="$3"
>>>> + _local="$4"
>>>> + _expected_result="$5"
>>>> + _cd="$6"
>>>> +
>>>> + if has_mount ; then
>>>> + echo
>>>> + echo "something mounted on $LOCALDIR"
>>>> + exit 1
>>>> + fi
>>>> +
>>>> + echo -n "mount" -o "$_opts" "$_server:$_path" "$_local"
>>>> + sudo mount -o "$_opts" "$_server:$_path" "$_local" > /dev/null 2>&1
>>>> + _status=$?
>>>> +
>>>> + if [ "$_status" = "0" -a -n "$_cd" ]; then
>>>> + echo -n " && ls $_cd"
>>>> + sudo ls $_cd > /dev/null 2>&1
>>>> + _status=$?
>>>> + fi
>>>> +
>>>> +
>>>> + echo -n " -> $_status"
>>>> +
>>>> + if [ "$_expected_result" = "$_status" ] ; then
>>>> + echo " [OK]"
>>>> + SUCCESSES=$(expr $SUCCESSES + 1)
>>>> + else
>>>> + echo -n " [FAIL!!]"
>>>> + echo " --> expected $_expected_result, but got $_status"
>>>> + FAILURES=$(expr $FAILURES + 1)
>>>> + fi
>>>> +
>>>> + sudo umount $LOCALDIR > /dev/null 2>&1
>>>> +
>>>> + while has_mount ; do
>>>> + sudo umount $LOCALDIR > /dev/null 2>&1
>>>> + sleep 0.1
>>>> + done
>>>> +
>>>> + # sigh, gssd gets angry
>>>> + if [ -n "$RUN_PAUSE" -a "$RUN_PAUSE" != "0" ] ; then
>>>> + sleep $RUN_PAUSE
>>>> + fi
>>>> +
>>>> + return $_status
>>>> +}
>>>> +
>>>> +echo
>>>> +echo "single sec= tests"
>>>> +for vers in $VERSIONS ; do
>>>> + for sec in $SINGLE_SEC_OPTIONS ; do
>>>> + for path in $PATHS; do
>>>> + _expected_result=32
>>>> + for pathsec in $(path_to_sec_flavors $path) ; do
>>>> + if [ "$pathsec" = "$sec" ]; then
>>>> + # should work!
>>>> + _expected_result=0
>>>> + fi
>>>> + done
>>>> +
>>>> + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result
>>>> + _status=$?
>>>> +
>>>> + done
>>>> + done
>>>> +done
>>>> +
>>>> +echo
>>>> +
>>>> +group_pause
>>>> +
>>>> +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then
>>>> + echo
>>>> + echo "multiple sec= tests"
>>>> + for vers in $VERSIONS ; do
>>>> + for sec in $MULTIPLE_SEC_OPTIONS ; do
>>>> + for path in $PATHS; do
>>>> + _expected_result=32
>>>> + for pathsec in $(path_to_sec_flavors $path) ; do
>>>> + for thissec in $(splitsec $sec) ; do
>>>> + if [ "$pathsec" = "$thissec" ]; then
>>>> + # should work!
>>>> + _expected_result=0
>>>> + fi
>>>> + done
>>>> + done
>>>> +
>>>> + run "$vers,sec=$sec" $SERVER $path $LOCALDIR $_expected_result
>>>> + _status=$?
>>>> +
>>>> + done
>>>> + done
>>>> + done
>>>> +fi
>>>> +
>>>> +group_pause
>>>> +
>>>> +echo
>>>> +echo "no sec= tests"
>>>> +for vers in $VERSIONS ; do
>>>> + for path in $PATHS; do
>>>> + run "$vers" $SERVER $path $LOCALDIR 0
>>>> + _status=$?
>>>> + done
>>>> +done
>>>> +
>>>> +group_pause
>>>> +
>>>> +echo
>>>> +echo "v4 secinfo tests"
>>>> +for vers in $VERSIONS_V4 ; do
>>>> + for path in $PATHS; do
>>>> + run "$vers" $SERVER / $LOCALDIR 0 $LOCALDIR/$path
>>>> + _status=$?
>>>> + done
>>>> +done
>>>> +
>>>> +group_pause
>>>> +
>>>> +echo
>>>> +echo "v4.x secinfo with single sec= tests"
>>>> +for vers in $VERSIONS_V4 ; do
>>>> + for sec in $SINGLE_SEC_OPTIONS ; do
>>>> + for path in $PATHS; do
>>>> + _expected_result=2
>>>> + for pathsec in $(path_to_sec_flavors $path) ; do
>>>> + if [ "$pathsec" = "$sec" ]; then
>>>> + # should work!
>>>> + _expected_result=0
>>>> + fi
>>>> + done
>>>> +
>>>> + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path
>>>> + _status=$?
>>>> +
>>>> + done
>>>> + done
>>>> +done
>>>> +
>>>> +group_pause
>>>> +
>>>> +if [ "$TEST_MULTIPLE_SEC_OPTIONS" = "true" ] ; then
>>>> + echo
>>>> + echo "v4.x secinfo with multiple sec= tests"
>>>> + for vers in $VERSIONS_V4 ; do
>>>> + for sec in $MULTIPLE_SEC_OPTIONS ; do
>>>> + for path in $PATHS; do
>>>> + _expected_result=2
>>>> + for pathsec in $(path_to_sec_flavors $path) ; do
>>>> + for thissec in $(splitsec $sec) ; do
>>>> + if [ "$pathsec" = "$thissec" ]; then
>>>> + # should work!
>>>> + _expected_result=0
>>>> + fi
>>>> + done
>>>> + done
>>>> +
>>>> + run "$vers,sec=$sec" $SERVER / $LOCALDIR $_expected_result $LOCALDIR/$path
>>>> + _status=$?
>>>> +
>>>> + done
>>>> + done
>>>> + done
>>>> +fi
>>>> +
>>>> +echo
>>>> +echo "Successfully ran $SUCCESSES tests"
>>>> +if [ "$FAILURES" != "0" ] ; then
>>>> + echo
>>>> + echo "$FAILURES failures!"
>>>> +fi
>>>> +exit $FAILURES
>>>
>>>
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
