On Wed, 05 Jun 2013, Myklebust, Trond wrote: > On Wed, 2013-06-05 at 09:51 -0400, Scott Mayhew wrote: > > I was investigating some performance concerns from a customer and came across > > something interesting. Whenever the directory that we're reading is changed on > > the server, we start re-reading the directory from the beginning. On a LAN > > connection or in a directory with a small number of entries, the impact isn't > > too noticeable... but reading a directory with a large number of entries over a > > WAN connection gets pretty bad. > > > > For NFS v3, what happens is that after each on-the-wire READDIR we call > > nfs_refresh_inode() and from there we get to nfs_update_inode(), where we wind > > up setting NFS_INO_INVALID_DATA in the directory's cache_validity flags. Then > > on a subsequent call to nfs_readdir() we call nfs_revalidate_mapping(), and > > seeing that NFS_INO_INVALIDATE_DATA is set we call nfs_invalidate_mapping(), > > flushing all our cached data for the directory. > > > > So for each nfs_readdir() call, we wind up redoing all of the on-the-wire > > readdir operations just to get back where we were, and then we're able to get > > just one more operation's worth of entries on top of that. If the directory on > > the NFS server is constantly being modified then this winds up being a lot of > > extra READDIR ops. I had an idea that maybe we could call nfs_refresh_inode() > > only when we've reached the end of the directory. I talked to Jeff about it and > > he suggested that maybe we could only revalidate if we're at the beginning of > > the directory or if nfs_attribute_cache_expired() for the dir. The attached > > patches take that approach. > > > > For example, on a test environment of two VMs, I have a directory of 100,000 > > entries that takes 981 READDIR operations to read if no modifications being made > > to the directory at the same time. If I add a 35ms delay between the client and > > the server and start a script on the server that repeatedly creates and removes > > a file in the directory being listed I get the following results: > > > > [root@localhost ~]# mount -t nfs -o nfsvers=3,nordirplus server:/export /mnt > > [root@localhost ~]# time /bin/ls /mnt/bigdir >/dev/null > > > > real 29m52.594s > > user 0m0.376s > > sys 0m2.191s > > [root@localhost ~]# mountstats --rpc /mnt | grep -A3 READDIR > > READDIR: > > 49729 ops (99%) 0 retrans (0%) 0 major timeouts > > avg bytes sent per op: 144 avg bytes received per op: 4196 > > backlog wait: 0.003620 RTT: 35.889501 total execute time: 35.925858 (milliseconds) > > [root@localhost ~]# > > > > > > With the patched kernel, that same test yields these results: > > > > [root@localhost ~]# time /bin/ls /mnt/bigdir >/dev/null > > > > real 0m35.952s > > user 0m0.460s > > sys 0m0.100s > > [root@localhost ~]# mountstats --rpc /mnt | grep -A3 READDIR > > READDIR: > > 981 ops (98%) 0 retrans (0%) 0 major timeouts > > avg bytes sent per op: 144 avg bytes received per op: 4194 > > backlog wait: 0.004077 RTT: 35.887870 total execute time: 35.926606 (milliseconds) > > [root@localhost ~]# > > > > > > For NFS v4, the situation is slightly different. We don't get post-op > > attributes from each READDIR, so we're not calling > > nfs_refresh_inode()/nfs_update_inode() after every operation and therefore not > > updating read_cache_jiffies. If we don't manage to read through the whole > > directory before the directory attributes from the initial GETATTR expire, then > > we're going to wind up calling __nfs_revalidate_inode() from > > nfs_revalidate_mapping(), and the attributes that we get from that GETATTR are > > going ultimately to lead us into nfs_invalidate_mapping() anyway. If the > > attached patches make sense then maybe it would be worthwhile to add a GETATTR > > operation to the compound that gets sent for a READDIR so that > > read_cache_jiffies stays updated. > > > > Finally there's the question of the dentry cache. Any time we find that the > > parent directory changes we're still going to wind up doing an on-the-wire > > LOOKUP. I don't think there's anything that can be done about that, but at > > least these patches prevent us doing the same LOOKUPs multiple times in the > > course of reading through the directory. > > Do these patches pass the 'rm -rf' torture test (i.e. creating lots of > subdirectories containing random files, then calling 'rm -rf')? > > I'd also like to see if the above test (and others you may be using) > play out well with different filesystems on the server side. The main > interest is to see how the change is affected by different readdir > cookie schemes... > Hi Trond, I did an 'rm -rf' of a kernel git tree over NFS v3 and v4 (both with and without -o nordirplus). I did the previously mentioned ls over WAN test. I also did various other tests (cthon, iozone, kernel compile, fsstress, fsx-linux). All of these were done using ext4, xfs, and btrfs as the backend filesystems. If there's other tests you'd like me to run, please let me know. -Scott -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
