On Tue, May 15, 2012 at 3:19 PM, Johannes Schild <JSchild@xxxxxx> wrote: > Hi, > > thanks for your fast reply. > > But now i run into a nullpointer exception while mounting /dev/osd0 > > > [ 329.919112] Modules linked in: raid456 async_raid6_recov async_pq raid6_pq async_memcpy bnx2i cnic cxgb4i cxgb3i iscsi_tcp be2iscsi iscsi_boot_sysfs uio cxgb4 libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi fuse ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack 8021q ip6table_filter ip6_tables garp stp llc fcoe libfcoe libfc scsi_transport_fc scsi_tgt snd_ens1371 gameport snd_rawmidi snd_ac97_codec ac97_bus joydev snd_seq snd_seq_device snd_pcm ppdev vmw_balloon floppy parport_pc snd_timer snd pcnet32 microcode parport pcspkr mii snd_page_alloc i2c_piix4 i2c_core shpchp uinput mptspi mptscsih mptbase scsi_transport_spi [last unloaded: iscsi_tcp] > [ 329.919133] > [ 329.919134] Pid: 2234, comm: mount Not tainted 3.3.0-pnfs #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform > [ 329.919137] RIP: 0010:[<ffffffff81259799>] [<ffffffff81259799>] exofs_free_sbi+0x59/0xa0 > [ 329.919139] RSP: 0018:ffff88003c4e5bc8 EFLAGS: 00010246 > [ 329.919141] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000001795 > [ 329.919142] RDX: 0000000000000000 RSI: 0000000000000046 RDI: ffff88003c4f5000 > [ 329.919143] RBP: ffff88003c4e5bd8 R08: 0000000000000000 R09: 0000000000000000 > [ 329.919144] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88003c4f5000 > [ 329.919145] R13: ffff88003c4e5d58 R14: 00000000fffffffb R15: ffff88003bd4e360 > [ 329.919146] FS: 00007f68ce81d800(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 > [ 329.919148] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > [ 329.919149] CR2: 0000000000000000 CR3: 000000003cbfd000 CR4: 00000000000406f0 > [ 329.919152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 329.919155] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [ 329.919156] Process mount (pid: 2234, threadinfo ffff88003c4e4000, task ffff88003aa42e40) > [ 329.919157] Stack: > [ 329.919158] ffff88003c4f5000 ffff88003c4f5800 ffff88003c4e5d18 ffffffff8125a780 > [ 329.919160] ffff88003c4e5c84 0000000081f27618 ffffffff81f27600 ffff88003f80c288 > [ 329.919162] ffff88003ddbeee0 0000000000000000 ffff88003c4e5c48 ffffffff812c8433 > [ 329.919164] Call Trace: > [ 329.919166] [<ffffffff8125a780>] exofs_fill_super+0x440/0x6e0 > [ 329.919171] [<ffffffff812c8433>] ? idr_pre_get+0x53/0x90 > [ 329.919173] [<ffffffff8125a340>] ? exofs_read_lookup_dev_table+0x480/0x480 > [ 329.919176] [<ffffffff81180e18>] mount_nodev+0x58/0xb0 > [ 329.919178] [<ffffffff812594ff>] exofs_mount+0x4f/0x80 > [ 329.919179] [<ffffffff81181e13>] mount_fs+0x43/0x1b0 > [ 329.919182] [<ffffffff8119b56a>] vfs_kern_mount+0x6a/0xf0 > [ 329.919183] [<ffffffff8119bd44>] do_kern_mount+0x54/0x110 > [ 329.919185] [<ffffffff8119d4b4>] do_mount+0x1a4/0x830 > [ 329.919188] [<ffffffff8115da33>] ? alloc_pages_current+0xa3/0x110 > [ 329.919191] [<ffffffff811229e4>] ? __get_free_pages+0x14/0x50 > [ 329.919193] [<ffffffff8119d18a>] ? copy_mount_options+0x3a/0x170 > [ 329.919194] [<ffffffff8119dc80>] sys_mount+0x90/0xe0 > [ 329.919199] [<ffffffff81605aa9>] system_call_fastpath+0x16/0x1b > [ 329.919200] Code: 66 90 41 8b 84 24 70 03 00 00 83 eb 01 39 c3 72 50 41 8b 94 24 74 03 00 00 01 c2 39 d3 73 42 89 da 29 c2 49 8b 84 24 88 03 00 00 <48> 8b 04 d0 48 8b 38 48 85 ff 74 0c 48 c7 00 00 00 00 00 e8 6f > [ 329.919214] RIP [<ffffffff81259799>] exofs_free_sbi+0x59/0xa0 > [ 329.919216] RSP <ffff88003c4e5bc8> > [ 329.919217] CR2: 0000000000000000 > [ 329.919220] ---[ end trace e5a3b1124e42d9e3 ]--- > > > Is there any possibility to avoid these failure? > > Just now i am using the 3.3.0 kernel from the linux-pnfs repository. > > > Thanks in adavance > > Cheers > Johannes > > -------- Original-Nachricht -------- >> Datum: Tue, 15 May 2012 12:48:08 +0300 >> Von: Boaz Harrosh <bharrosh@xxxxxxxxxxx> >> An: Johannes Schild <JSchild@xxxxxx> >> CC: linux-nfs@xxxxxxxxxxxxxxx, open-osd <osd-dev@xxxxxxxxxxxx> >> Betreff: Re: Questions about Exofs > >> On 05/15/2012 12:03 PM, Johannes Schild wrote: >> >> > Hi, >> > >> > i try to set up the object-based layout with pnfs. >> > I am using the OSC-OSD as target. It works well and i can login. >> > Trying the scripts "do-*" from git://git.open-osd.org/open-osd.git the >> do-osd script works for me. The do-exofs doesnt, here i have some question: >> > >> > 1. Is the UUID in the do-exofs script optional? >> > >> >> >> No it is not optional >> >> > 2. If no how can i get it for my device? >> > >> >> >> Exactly! the ./do-exofs format command will set this for you, as well as >> mkfs.exofs the >> FS for you. >> >> > 3. It is mandatory to use raid-driver (raid456) in the script? Why? >> > >> >> >> What? where? Rrrr you are right. this is a very old tree. Let me see >> if I have something newer to push. It should all load automatically now. >> >> But yes the dependency on raid456.ko is built in. Though if you use >> raid=0 on the format command line it will not be used in run time. >> >> > >> > The error is: >> > mount -t exofs -o >> osdname=d2683732-c906-4ee1-9dbd-c10c27bb40df,pid=0x10000,_netdev /dev/osd0 /mnt/osd0/ >> > mount: wrong fs type, bad option, bad superblock on /dev/osd0, >> > missing codepage or helper program, or other error >> > In some cases useful info is found in syslog - try >> > dmesg | tail or so >> > >> > dmesg says: >> > exofs: Unable to mount exofs on (null) pid=0x0 err=-22 >> > >> >> >> Probably you forgot the "./do-exofs format" stage. Please read the script >> before, you might need to edit it. It is the stage that calls mkfs.exofs >> to make a new filesystem for you. (An OSD is a raw device that can host >> many filesystems each in it's own osd-partition. >> >> > >> > Thanks for answering my questions. >> >> >> > Regards >> > Johannes >> > >> >> >> Cheers >> Boaz >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-nfs" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! > Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a > -- > To unsubscribe from this list: send the line "unsubscribe linux-nfs" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html Hi, This crash has happened to me as well. I was not able to explicitly resolve it, but I have managed to set up a working pNFS object layout environment. I'll try to give the instructions I use for setting up the MDS, without using the do-* scripts, assuming you managed to set up the data server. (I'm assuming a fedora distro): setup the iscsi initiator: # yum -y install iscsi-initiator-utils # service iscsid start # modprobe osd # iscsiadm -m discovery -t sendtargets -p <your DS> --login on my setup, in some (most) cases, the MDS machine hangs when you power it off. I don't know why this happens. format and mount the OSD device: # modprobe raid456 # modprobe exofs # cd /your/open-osd/project/directory # LD_LIBRARY_PATH=lib ./usr/mkfs.exofs --pid=0x10000 --dev=/dev/osd0 to me, this works without UUID. I had trouble in setting up exofs with RAID, but if you're not interested in RAID that will do. note that this setup is from the old tree (commit df9cc23ca0e15f2fc7f1d16a21acb87c63038f50), I don't know if and what have been pushed to it recently. note that if you use the --format flag you would have to supply a UUID. now you can mount the object file system. /dev/osd0 is seen as a char device and not a block device, so the system can't read its superblock and tell which file system is it. you have to explicitly specify exofs as the file system, and exofs will do the hard work.: # mount -t exofs -o pid=0x10000 /dev/osd0 /mnt/pnfs -- Idan Kedar Tonian -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
