Re: [PATCH] nfs-utils/blkmapd: Add complex block layout discovery and mapping daemon

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I merged this to git:/linux-nfs.org/~bhalevy/pnfs-nfs-utils.git
at tip pnfs-nfs-utils-1-2-5-rc1-2011-08-15-1
The branches are organized as follows:

nfs-utils (nfs-utils-1-2-5-rc1)
	blkmapd
		dev
			spnfsd
				master (== spnfsd)

Benny

On 2011-08-11 21:20, Jim Rees wrote:
> This daemon is required to handle upcalls from the kernel pnfs block layout
> driver.
> 
> Signed-off-by: Jim Rees <rees@xxxxxxxxx>
> ---
>  .gitignore                       |    1 +
>  configure.ac                     |    4 +
>  utils/Makefile.am                |    4 +
>  utils/blkmapd/Makefile.am        |   19 ++
>  utils/blkmapd/blkmapd.man        |   54 ++++
>  utils/blkmapd/device-discovery.c |  453 +++++++++++++++++++++++++++++++++
>  utils/blkmapd/device-discovery.h |  162 ++++++++++++
>  utils/blkmapd/device-inq.c       |  233 +++++++++++++++++
>  utils/blkmapd/device-process.c   |  407 ++++++++++++++++++++++++++++++
>  utils/blkmapd/dm-device.c        |  518 ++++++++++++++++++++++++++++++++++++++
>  10 files changed, 1855 insertions(+), 0 deletions(-)
>  create mode 100644 utils/blkmapd/Makefile.am
>  create mode 100644 utils/blkmapd/blkmapd.man
>  create mode 100644 utils/blkmapd/device-discovery.c
>  create mode 100644 utils/blkmapd/device-discovery.h
>  create mode 100644 utils/blkmapd/device-inq.c
>  create mode 100644 utils/blkmapd/device-process.c
>  create mode 100644 utils/blkmapd/dm-device.c
> 
> diff --git a/.gitignore b/.gitignore
> index f5b5cf0..7bd9921 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -36,6 +36,7 @@ support/include/stamp-h1
>  lib*.a
>  tools/rpcgen/rpcgen
>  tools/rpcdebug/rpcdebug
> +utils/blkmapd/blkmapd
>  utils/exportfs/exportfs
>  utils/idmapd/idmapd
>  utils/lockd/lockd
> diff --git a/configure.ac b/configure.ac
> index c9fb27b..08ef029 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -64,11 +64,14 @@ AC_ARG_ENABLE(nfsv4,
>  	enable_nfsv4=yes)
>  	if test "$enable_nfsv4" = yes; then
>  		AC_DEFINE(NFS4_SUPPORTED, 1, [Define this if you want NFSv4 support compiled in])
> +		BLKMAPD=blkmapd
>  		IDMAPD=idmapd
>  	else
>  		enable_nfsv4=
> +		BLKMAPD=
>  		IDMAPD=
>  	fi
> +	AC_SUBST(BLKMAPD)
>  	AC_SUBST(IDMAPD)
>  	AC_SUBST(enable_nfsv4)
>  	AM_CONDITIONAL(CONFIG_NFSV4, [test "$enable_nfsv4" = "yes"])
> @@ -450,6 +453,7 @@ AC_CONFIG_FILES([
>  	tools/mountstats/Makefile
>  	tools/nfs-iostat/Makefile
>  	utils/Makefile
> +	utils/blkmapd/Makefile
>  	utils/exportfs/Makefile
>  	utils/gssd/Makefile
>  	utils/idmapd/Makefile
> diff --git a/utils/Makefile.am b/utils/Makefile.am
> index a0ea116..0d222f0 100644
> --- a/utils/Makefile.am
> +++ b/utils/Makefile.am
> @@ -9,6 +9,10 @@ OPTDIRS += nfsidmap
>  endif
>  endif
>  
> +if CONFIG_NFSV4
> +OPTDIRS += blkmapd
> +endif
> +
>  if CONFIG_GSS
>  OPTDIRS += gssd
>  endif
> diff --git a/utils/blkmapd/Makefile.am b/utils/blkmapd/Makefile.am
> new file mode 100644
> index 0000000..70e299e
> --- /dev/null
> +++ b/utils/blkmapd/Makefile.am
> @@ -0,0 +1,19 @@
> +## Process this file with automake to produce Makefile.in
> +
> +#man8_MANS	= blkmapd.man
> +
> +AM_CFLAGS	+= -D_LARGEFILE64_SOURCE
> +sbin_PROGRAMS	= blkmapd
> +
> +blkmapd_SOURCES = \
> +	device-discovery.c \
> +	device-inq.c \
> +	device-process.c \
> +	dm-device.c \
> +	\
> +	device-discovery.h
> +
> +blkmapd_LDADD = -ldevmapper ../../support/nfs/libnfs.a
> +
> +MAINTAINERCLEANFILES = Makefile.in
> +
> diff --git a/utils/blkmapd/blkmapd.man b/utils/blkmapd/blkmapd.man
> new file mode 100644
> index 0000000..fd38122
> --- /dev/null
> +++ b/utils/blkmapd/blkmapd.man
> @@ -0,0 +1,54 @@
> +.\"
> +.\" Copyright 2011, Jim Rees.
> +.\"
> +.\" You may distribute under the terms of the GNU General Public
> +.\" License as specified in the file COPYING that comes with the
> +.\" nfs-utils distribution.
> +.\"
> +.TH blkmapd 8 "11 August 2011"
> +.SH NAME
> +blkmapd \- pNFS block layout mapping daemon
> +.SH SYNOPSIS
> +.B "blkmapd [-d] [-f]"
> +.SH DESCRIPTION
> +The
> +.B blkmapd
> +daemon performs device discovery and mapping for the parallel NFS (pNFS) block layout
> +client [RFC5663].
> +.PP
> +The pNFS block layout protocol builds a complex storage hierarchy from a set
> +of
> +.I simple volumes.
> +These simple volumes are addressed by content, using a signature on the
> +volume to uniquely name each one.
> +The daemon locates a volume by examining each block device in the system for
> +the given signature.
> +.PP
> +The topology typically consists of a hierarchy of volumes built by striping,
> +slicing, and concatenating the simple volumes.
> +The
> +.B blkmapd
> +daemon uses the device-mapper driver to construct logical devices that
> +reflect the server topology, and passes these devices to the kernel for use
> +by the pNFS block layout client.
> +.SH OPTIONS
> +.TP
> +.B -d
> +Performs device discovery only then exits.
> +.TP
> +.B -f
> +Runs
> +.B blkmapd
> +in the foreground and sends output to stderr (as opposed to syslogd)
> +.SH SEE ALSO
> +.BR nfs (5),
> +.BR dmsetup (8)
> +.sp
> +RFC 5661 for the NFS version 4.1 specification.
> +.br
> +RFC 5663 for the pNFS block layout specification.
> +.SH AUTHORS
> +.br
> +Haiying Tang <Tang_Haiying@xxxxxxx>
> +.br
> +Jim Rees <rees@xxxxxxxxx>
> diff --git a/utils/blkmapd/device-discovery.c b/utils/blkmapd/device-discovery.c
> new file mode 100644
> index 0000000..c21de3e
> --- /dev/null
> +++ b/utils/blkmapd/device-discovery.c
> @@ -0,0 +1,453 @@
> +/*
> + * device-discovery.c: main function, discovering device and processing
> + * pipe request from kernel.
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/ioctl.h>
> +#include <sys/mount.h>
> +#include <sys/select.h>
> +#include <linux/kdev_t.h>
> +#include <scsi/scsi.h>
> +#include <scsi/scsi_ioctl.h>
> +#include <scsi/sg.h>
> +
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <syslog.h>
> +#include <dirent.h>
> +#include <ctype.h>
> +#include <fcntl.h>
> +#include <unistd.h>
> +#include <libgen.h>
> +#include <errno.h>
> +#include <libdevmapper.h>
> +
> +#include "device-discovery.h"
> +
> +#define BL_PIPE_FILE	"/var/lib/nfs/rpc_pipefs/nfs/blocklayout"
> +#define PID_FILE	"/var/run/blkmapd.pid"
> +
> +struct bl_disk *visible_disk_list;
> +
> +struct bl_disk_path *bl_get_path(const char *filepath,
> +				 struct bl_disk_path *paths)
> +{
> +	struct bl_disk_path *tmp = paths;
> +
> +	while (tmp) {
> +		if (!strcmp(tmp->full_path, filepath))
> +			break;
> +		tmp = tmp->next;
> +	}
> +	return tmp;
> +}
> +
> +/* Check whether valid_path is a substring(partition) of path */
> +int bl_is_partition(struct bl_disk_path *valid_path, struct bl_disk_path *path)
> +{
> +	if (!strncmp(valid_path->full_path, path->full_path,
> +		     strlen(valid_path->full_path)))
> +		return 1;
> +
> +	return 0;
> +}
> +
> +/*
> + * For multipath devices, devices state could be PASSIVE/ACTIVE/PSEUDO,
> + * where PSEUDO > ACTIVE > PASSIVE. Device with highest state is used to
> + * create pseudo device. So if state is higher, the device path needs to
> + * be updated.
> + * If device-mapper multipath support is a must, pseudo devices should
> + * exist for each multipath device. If not, active device path will be
> + * chosen for device creation.
> + * Treat partition as invalid path.
> + */
> +int bl_update_path(struct bl_disk_path *path, enum bl_path_state_e state,
> +		   struct bl_disk *disk)
> +{
> +	struct bl_disk_path *valid_path = disk->valid_path;
> +
> +	if (valid_path) {
> +		if (valid_path->state >= state) {
> +			if (bl_is_partition(valid_path, path))
> +				return 0;
> +		}
> +	}
> +	return 1;
> +}
> +
> +void bl_release_disk(void)
> +{
> +	struct bl_disk *disk;
> +	struct bl_disk_path *path = NULL;
> +
> +	while (visible_disk_list) {
> +		disk = visible_disk_list;
> +		path = disk->paths;
> +		while (path) {
> +			disk->paths = path->next;
> +			free(path->full_path);
> +			free(path);
> +			path = disk->paths;
> +		}
> +		if (disk->serial)
> +			free(disk->serial);
> +		visible_disk_list = disk->next;
> +		free(disk);
> +	}
> +}
> +
> +void bl_add_disk(char *filepath)
> +{
> +	struct bl_disk *disk = NULL;
> +	int fd = 0;
> +	struct stat sb;
> +	off_t size = 0;
> +	struct bl_serial *serial = NULL;
> +	enum bl_path_state_e ap_state;
> +	struct bl_disk_path *diskpath = NULL, *path = NULL;
> +	dev_t dev;
> +
> +	fd = open(filepath, O_RDONLY | O_LARGEFILE);
> +	if (fd < 0)
> +		return;
> +
> +	if (fstat(fd, &sb)) {
> +		close(fd);
> +		return;
> +	}
> +
> +	if (!sb.st_size)
> +		ioctl(fd, BLKGETSIZE, &size);
> +	else
> +		size = sb.st_size;
> +
> +	if (!size) {
> +		close(fd);
> +		return;
> +	}
> +
> +	dev = sb.st_rdev;
> +	serial = bldev_read_serial(fd, filepath);
> +	if (dm_is_dm_major(major(dev)))
> +		ap_state = BL_PATH_STATE_PSEUDO;
> +	else
> +		ap_state = bldev_read_ap_state(fd);
> +	close(fd);
> +
> +	if (ap_state != BL_PATH_STATE_ACTIVE)
> +		return;
> +
> +	for (disk = visible_disk_list; disk != NULL; disk = disk->next) {
> +		/* Already scanned or a partition?
> +		 * XXX: if released each time, maybe not need to compare
> +		 */
> +		if ((serial->len == disk->serial->len) &&
> +		    !memcmp(serial->data, disk->serial->data, serial->len)) {
> +			diskpath = bl_get_path(filepath, disk->paths);
> +			break;
> +		}
> +	}
> +
> +	if (disk && diskpath)
> +		return;
> +
> +	/* add path */
> +	path = malloc(sizeof(struct bl_disk_path));
> +	if (!path) {
> +		BL_LOG_ERR("%s: Out of memory!\n", __func__);
> +		goto out_err;
> +	}
> +	path->next = NULL;
> +	path->state = ap_state;
> +	path->full_path = strdup(filepath);
> +	if (!path->full_path)
> +		goto out_err;
> +
> +	if (!disk) {		/* add disk */
> +		disk = malloc(sizeof(struct bl_disk));
> +		if (!disk) {
> +			BL_LOG_ERR("%s: Out of memory!\n", __func__);
> +			goto out_err;
> +		}
> +		disk->next = visible_disk_list;
> +		disk->dev = dev;
> +		disk->size = size;
> +		disk->serial = serial;
> +		disk->valid_path = path;
> +		disk->paths = path;
> +		visible_disk_list = disk;
> +	} else {
> +		path->next = disk->paths;
> +		disk->paths = path;
> +		/* check whether we need to update disk info */
> +		if (bl_update_path(path, path->state, disk)) {
> +			disk->dev = dev;
> +			disk->size = size;
> +			disk->valid_path = path;
> +		}
> +	}
> +	return;
> +
> + out_err:
> +	if (path) {
> +		if (path->full_path)
> +			free(path->full_path);
> +		free(path);
> +	}
> +	return;
> +}
> +
> +int bl_discover_devices(void)
> +{
> +	FILE *f;
> +	int n;
> +	char buf[PATH_MAX], devname[PATH_MAX], fulldevname[PATH_MAX];
> +
> +	/* release previous list */
> +	bl_release_disk();
> +
> +	/* scan all block devices */
> +	f = fopen("/proc/partitions", "r");
> +	if (f == NULL)
> +		return 0;
> +
> +	while (1) {
> +		if (fgets(buf, sizeof buf, f) == NULL)
> +			break;
> +		n = sscanf(buf, "%*d %*d %*d %31s", devname);
> +		if (n != 1)
> +			continue;
> +		snprintf(fulldevname, sizeof fulldevname, "/sys/block/%s",
> +			 devname);
> +		if (access(fulldevname, F_OK) < 0)
> +			continue;
> +		snprintf(fulldevname, sizeof fulldevname, "/dev/%s", devname);
> +		bl_add_disk(fulldevname);
> +	}
> +
> +	fclose(f);
> +
> +	return 0;
> +}
> +
> +/* process kernel request
> + * return 0: request processed, and no more request waiting;
> + * return 1: request processed, and more requests waiting;
> + * return < 0: error
> + */
> +int bl_disk_inquiry_process(int fd)
> +{
> +	int ret = 0;
> +	struct bl_pipemsg_hdr head;
> +	char *buf = NULL;
> +	uint32_t major, minor;
> +	uint16_t buflen;
> +	struct bl_dev_msg reply;
> +
> +	/* read request */
> +	if (atomicio(read, fd, &head, sizeof(head)) != sizeof(head)) {
> +		/* Note that an error in this or the next read is pretty
> +		 * catastrophic, as there is no good way to resync into
> +		 * the pipe's stream.
> +		 */
> +		BL_LOG_ERR("Read pipefs head error!\n");
> +		ret = -EIO;
> +		goto out;
> +	}
> +
> +	buflen = head.totallen;
> +	buf = malloc(buflen);
> +	if (!buf) {
> +		BL_LOG_ERR("%s: Out of memory!\n", __func__);
> +		ret = -ENOMEM;
> +		goto out;
> +	}
> +
> +	if (atomicio(read, fd, buf, buflen) != buflen) {
> +		BL_LOG_ERR("Read pipefs content error!\n");
> +		ret = -EIO;
> +		goto out;
> +	}
> +
> +	reply.status = BL_DEVICE_REQUEST_PROC;
> +
> +	switch (head.type) {
> +	case BL_DEVICE_MOUNT:
> +		/*
> +		 * It shouldn't be necessary to discover devices here, since
> +		 * process_deviceinfo() will re-discover if it can't find
> +		 * the devices it needs.  But in the case of multipath
> +		 * devices (ones that appear more than once, for example an
> +		 * active and a standby LUN), this will re-order them in the
> +		 * correct priority.
> +		 */
> +		bl_discover_devices();
> +		if (!process_deviceinfo(buf, buflen, &major, &minor)) {
> +			reply.status = BL_DEVICE_REQUEST_ERR;
> +			break;
> +		}
> +		reply.major = major;
> +		reply.minor = minor;
> +		break;
> +	case BL_DEVICE_UMOUNT:
> +		if (!dm_device_remove_all((uint64_t *) buf))
> +			reply.status = BL_DEVICE_REQUEST_ERR;
> +		break;
> +	default:
> +		reply.status = BL_DEVICE_REQUEST_ERR;
> +		break;
> +	}
> +
> +	/* write to pipefs */
> +	if (atomicio((void *)write, fd, &reply, sizeof(reply))
> +	    != sizeof(reply)) {
> +		BL_LOG_ERR("Write pipefs error!\n");
> +		ret = -EIO;
> +	}
> +
> + out:
> +	if (buf)
> +		free(buf);
> +	return ret;
> +}
> +
> +/* TODO: set bl_process_stop to 1 in command */
> +unsigned int bl_process_stop;
> +
> +int bl_run_disk_inquiry_process(int fd)
> +{
> +	fd_set rset;
> +	int ret;
> +
> +	bl_process_stop = 0;
> +
> +	for (;;) {
> +		if (bl_process_stop)
> +			return 1;
> +		FD_ZERO(&rset);
> +		FD_SET(fd, &rset);
> +		ret = 0;
> +		switch (select(fd + 1, &rset, NULL, NULL, NULL)) {
> +		case -1:
> +			if (errno == EINTR)
> +				continue;
> +			else {
> +				ret = -errno;
> +				goto out;
> +			}
> +		case 0:
> +			goto out;
> +		default:
> +			if (FD_ISSET(fd, &rset))
> +				ret = bl_disk_inquiry_process(fd);
> +		}
> +	}
> + out:
> +	return ret;
> +}
> +
> +/* Daemon */
> +int main(int argc, char **argv)
> +{
> +	int fd, pidfd = -1, opt, dflag = 0, fg = 0, ret = 1;
> +	struct stat statbuf;
> +	char pidbuf[64];
> +
> +	while ((opt = getopt(argc, argv, "df")) != -1) {
> +		switch (opt) {
> +		case 'd':
> +			dflag = 1;
> +			break;
> +		case 'f':
> +			fg = 1;
> +			break;
> +		}
> +	}
> +
> +	if (fg) {
> +		openlog("blkmapd", LOG_PERROR, 0);
> +	} else {
> +		if (!stat(PID_FILE, &statbuf)) {
> +			fprintf(stderr, "Pid file %s already existed\n", PID_FILE);
> +			exit(1);
> +		}
> +
> +		if (daemon(0, 0) != 0) {
> +			fprintf(stderr, "Daemonize failed\n");
> +			exit(1);
> +		}
> +
> +		openlog("blkmapd", LOG_PID, 0);
> +		pidfd = open(PID_FILE, O_WRONLY | O_CREAT, 0644);
> +		if (pidfd < 0) {
> +			BL_LOG_ERR("Create pid file %s failed\n", PID_FILE);
> +			exit(1);
> +		}
> +
> +		if (lockf(pidfd, F_TLOCK, 0) < 0) {
> +			BL_LOG_ERR("Lock pid file %s failed\n", PID_FILE);
> +			close(pidfd);
> +			exit(1);
> +		}
> +		ftruncate(pidfd, 0);
> +		sprintf(pidbuf, "%d\n", getpid());
> +		write(pidfd, pidbuf, strlen(pidbuf));
> +	}
> +
> +	if (dflag) {
> +		bl_discover_devices();
> +		exit(0);
> +	}
> +
> +	/* open pipe file */
> +	fd = open(BL_PIPE_FILE, O_RDWR);
> +	if (fd < 0) {
> +		BL_LOG_ERR("open pipe file %s error\n", BL_PIPE_FILE);
> +		exit(1);
> +	}
> +
> +	while (1) {
> +		/* discover device when needed */
> +		bl_discover_devices();
> +
> +		ret = bl_run_disk_inquiry_process(fd);
> +		if (ret < 0) {
> +			/* what should we do with process error? */
> +			BL_LOG_ERR("inquiry process return %d\n", ret);
> +		}
> +	}
> +
> +	if (pidfd >= 0) {
> +		close(pidfd);
> +		unlink(PID_FILE);
> +	}
> +
> +	exit(ret);
> +}
> diff --git a/utils/blkmapd/device-discovery.h b/utils/blkmapd/device-discovery.h
> new file mode 100644
> index 0000000..a86eed9
> --- /dev/null
> +++ b/utils/blkmapd/device-discovery.h
> @@ -0,0 +1,162 @@
> +/*
> + * bl-device-discovery.h
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#ifndef BL_DEVICE_DISCOVERY_H
> +#define BL_DEVICE_DISCOVERY_H
> +
> +#include <stdint.h>
> +
> +enum blk_vol_type {
> +	BLOCK_VOLUME_SIMPLE = 0,	/* maps to a single LU */
> +	BLOCK_VOLUME_SLICE = 1,		/* slice of another volume */
> +	BLOCK_VOLUME_CONCAT = 2,	/* concatenation of multiple volumes */
> +	BLOCK_VOLUME_STRIPE = 3,	/* striped across multiple volumes */
> +	BLOCK_VOLUME_PSEUDO = 4,
> +};
> +
> +/* All disk offset/lengths are stored in 512-byte sectors */
> +struct bl_volume {
> +	uint32_t bv_type;
> +	off_t bv_size;
> +	struct bl_volume **bv_vols;
> +	int bv_vol_n;
> +	union {
> +		dev_t bv_dev;		/* for BLOCK_VOLUME_SIMPLE(PSEUDO) */
> +		off_t bv_stripe_unit;	/* for BLOCK_VOLUME_STRIPE(CONCAT) */
> +		off_t bv_offset;	/* for BLOCK_VOLUME_SLICE */
> +	} param;
> +};
> +
> +struct bl_sig_comp {
> +	int64_t bs_offset;		/* In bytes */
> +	uint32_t bs_length;		/* In bytes */
> +	char *bs_string;
> +};
> +
> +/* Maximum number of signatures components in a simple volume */
> +# define BLOCK_MAX_SIG_COMP 16
> +
> +struct bl_sig {
> +	int si_num_comps;
> +	struct bl_sig_comp si_comps[BLOCK_MAX_SIG_COMP];
> +};
> +
> +/*
> + * Multipath support: ACTIVE or PSEUDO device is valid,
> + *		      PASSIVE is a standby for ACTIVE.
> + */
> +enum bl_path_state_e {
> +	BL_PATH_STATE_PASSIVE = 1,
> +	BL_PATH_STATE_ACTIVE = 2,
> +	BL_PATH_STATE_PSEUDO = 3,
> +};
> +
> +struct bl_serial {
> +	int len;
> +	char *data;
> +};
> +
> +struct bl_disk_path {
> +	struct bl_disk_path *next;
> +	char *full_path;
> +	enum bl_path_state_e state;
> +};
> +
> +struct bl_disk {
> +	struct bl_disk *next;
> +	struct bl_serial *serial;
> +	dev_t dev;
> +	off_t size;			/* in 512-byte sectors */
> +	struct bl_disk_path *valid_path;
> +	struct bl_disk_path *paths;
> +};
> +
> +struct bl_dev_id {
> +	unsigned char type;
> +	unsigned char ids;
> +	unsigned char reserve;
> +	unsigned char len;
> +	char data[0];
> +};
> +
> +struct bl_dev_msg {
> +	int status;
> +	uint32_t major, minor;
> +};
> +
> +struct bl_pipemsg_hdr {
> +	uint8_t type;
> +	uint16_t totallen;		/* length of message excluding hdr */
> +};
> +
> +#define BL_DEVICE_UMOUNT                0x0	/* Umount--delete devices */
> +#define BL_DEVICE_MOUNT                 0x1	/* Mount--create devices */
> +#define BL_DEVICE_REQUEST_INIT          0x0	/* Start request */
> +#define BL_DEVICE_REQUEST_PROC          0x1	/* User process succeeds */
> +#define BL_DEVICE_REQUEST_ERR           0x2	/* User process fails */
> +
> +uint32_t *blk_overflow(uint32_t * p, uint32_t * end, size_t nbytes);
> +
> +#define BLK_READBUF(p, e, nbytes)  do { \
> +	p = blk_overflow(p, e, nbytes); \
> +	if (!p) {\
> +		goto out_err;\
> +	} \
> +} while (0)
> +
> +#define READ32(x)         (x) = ntohl(*p++)
> +
> +#define READ64(x)         do {                  \
> +	(x) = (uint64_t)ntohl(*p++) << 32;           \
> +	(x) |= ntohl(*p++);                     \
> +} while (0)
> +
> +#define READ_SECTOR(x)     do { \
> +	READ64(tmp); \
> +	if (tmp & 0x1ff) { \
> +		goto out_err; \
> +	} \
> +	(x) = tmp >> 9; \
> +} while (0)
> +
> +extern struct bl_disk *visible_disk_list;
> +uint64_t dm_device_create(struct bl_volume *vols, int num_vols);
> +int dm_device_remove_all(uint64_t *dev);
> +uint64_t process_deviceinfo(const char *dev_addr_buf,
> +			    unsigned int dev_addr_len,
> +			    uint32_t *major, uint32_t *minor);
> +
> +extern ssize_t atomicio(ssize_t(*f) (int, void *, size_t),
> +			int fd, void *_s, size_t n);
> +extern struct bl_serial *bldev_read_serial(int fd, const char *filename);
> +extern enum bl_path_state_e bldev_read_ap_state(int fd);
> +extern int bl_discover_devices(void);
> +
> +#define BL_LOG_INFO(fmt...)		syslog(LOG_INFO, fmt)
> +#define BL_LOG_WARNING(fmt...)		syslog(LOG_WARNING, fmt)
> +#define BL_LOG_ERR(fmt...)		syslog(LOG_ERR, fmt)
> +#define BL_LOG_DEBUG(fmt...)		syslog(LOG_DEBUG, fmt)
> +#endif
> diff --git a/utils/blkmapd/device-inq.c b/utils/blkmapd/device-inq.c
> new file mode 100644
> index 0000000..eabc70c
> --- /dev/null
> +++ b/utils/blkmapd/device-inq.c
> @@ -0,0 +1,233 @@
> +/*
> + * device-inq.c: inquire SCSI device information.
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * This program refers to "SCSI Primary Commands - 3 (SPC-3)
> + * at http://www.t10.org and sg_inq.c in sg3_utils-1.26 for
> + * Linux OS SCSI subsystem, by D. Gilbert.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/ioctl.h>
> +#include <sys/mount.h>
> +#include <sys/select.h>
> +#include <scsi/scsi.h>
> +#include <scsi/scsi_ioctl.h>
> +#include <scsi/sg.h>
> +
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <unistd.h>
> +#include <string.h>
> +#include <syslog.h>
> +#include <dirent.h>
> +#include <ctype.h>
> +#include <fcntl.h>
> +#include <libgen.h>
> +#include <errno.h>
> +
> +#include "device-discovery.h"
> +
> +#define DEF_ALLOC_LEN	255
> +#define MX_ALLOC_LEN	(0xc000 + 0x80)
> +
> +static struct bl_serial *bl_create_scsi_string(int len, const char *bytes)
> +{
> +	struct bl_serial *s;
> +
> +	s = malloc(sizeof(*s) + len);
> +	if (s) {
> +		s->data = (char *)&s[1];
> +		s->len = len;
> +		memcpy(s->data, bytes, len);
> +	}
> +	return s;
> +}
> +
> +static void bl_free_scsi_string(struct bl_serial *str)
> +{
> +	if (str)
> +		free(str);
> +}
> +
> +#define sg_io_ok(io_hdr) \
> +	((((io_hdr).status & 0x7e) == 0) && \
> +	((io_hdr).host_status == 0) && \
> +	(((io_hdr).driver_status & 0x0f) == 0))
> +
> +static int sg_timeout = 1 * 1000;
> +
> +static int bldev_inquire_page(int fd, int page, char *buffer, int len)
> +{
> +	unsigned char cmd[] = { INQUIRY, 0, 0, 0, 0, 0 };
> +	unsigned char sense_b[28];
> +	struct sg_io_hdr io_hdr;
> +	if (page >= 0) {
> +		cmd[1] = 1;
> +		cmd[2] = page;
> +	}
> +	cmd[3] = (unsigned char)((len >> 8) & 0xff);
> +	cmd[4] = (unsigned char)(len & 0xff);
> +
> +	memset(&io_hdr, 0, sizeof(struct sg_io_hdr));
> +	io_hdr.interface_id = 'S';
> +	io_hdr.cmd_len = sizeof(cmd);
> +	io_hdr.mx_sb_len = sizeof(sense_b);
> +	io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
> +	io_hdr.dxfer_len = len;
> +	io_hdr.dxferp = buffer;
> +	io_hdr.cmdp = cmd;
> +	io_hdr.sbp = sense_b;
> +	io_hdr.timeout = sg_timeout;
> +	if (ioctl(fd, SG_IO, &io_hdr) < 0)
> +		return -1;
> +
> +	if (sg_io_ok(io_hdr))
> +		return 0;
> +	return -1;
> +}
> +
> +static int bldev_inquire_pages(int fd, int page, char **buffer)
> +{
> +	int status = 0;
> +	char *tmp;
> +	int len;
> +
> +	*buffer = calloc(DEF_ALLOC_LEN, sizeof(char));
> +	if (!*buffer) {
> +		BL_LOG_ERR("%s: Out of memory!\n", __func__);
> +		return -ENOMEM;
> +	}
> +
> +	status = bldev_inquire_page(fd, page, *buffer, DEF_ALLOC_LEN);
> +	if (status)
> +		goto out;
> +
> +	status = -1;
> +	if ((*(*buffer + 1) & 0xff) != page)
> +		goto out;
> +
> +	len = (*(*buffer + 2) << 8) + *(*buffer + 3) + 4;
> +	if (len > MX_ALLOC_LEN) {
> +		BL_LOG_ERR("SCSI response length too long: %d\n", len);
> +		goto out;
> +	}
> +	if (len > DEF_ALLOC_LEN) {
> +		tmp = realloc(*buffer, len);
> +		if (!tmp) {
> +			BL_LOG_ERR("%s: Out of memory!\n", __func__);
> +			status = -ENOMEM;
> +			goto out;
> +		}
> +		*buffer = tmp;
> +		status = bldev_inquire_page(fd, page, *buffer, len);
> +		if (status)
> +			goto out;
> +	}
> +	status = 0;
> + out:
> +	return status;
> +}
> +
> +/* For EMC multipath devices, use VPD page (0xc0) to get status.
> + * For other devices, return ACTIVE for now
> + */
> +extern enum bl_path_state_e bldev_read_ap_state(int fd)
> +{
> +	int status = 0;
> +	char *buffer = NULL;
> +	enum bl_path_state_e ap_state = BL_PATH_STATE_ACTIVE;
> +
> +	status = bldev_inquire_pages(fd, 0xc0, &buffer);
> +	if (status)
> +		goto out;
> +
> +	if (buffer[4] < 0x02)
> +		ap_state = BL_PATH_STATE_PASSIVE;
> + out:
> +	if (buffer)
> +		free(buffer);
> +	return ap_state;
> +}
> +
> +struct bl_serial *bldev_read_serial(int fd, const char *filename)
> +{
> +	struct bl_serial *serial_out = NULL;
> +	int status = 0;
> +	char *buffer;
> +	struct bl_dev_id *dev_root, *dev_id;
> +	unsigned int pos, len, current_id = 0;
> +
> +	status = bldev_inquire_pages(fd, 0x83, &buffer);
> +	if (status)
> +		goto out;
> +
> +	dev_root = (struct bl_dev_id *)buffer;
> +
> +	pos = 0;
> +	current_id = 0;
> +	len = dev_root->len;
> +	while (pos < (len - sizeof(struct bl_dev_id) + sizeof(unsigned char))) {
> +		dev_id = (struct bl_dev_id *)&(dev_root->data[pos]);
> +		if ((dev_id->ids & 0xf) < current_id)
> +			continue;
> +		switch (dev_id->ids & 0xf) {
> +			/* We process SCSI ID with four ID cases: 0, 1, 2 and 3.
> +			 * When more than one ID is available, priority is
> +			 * 3>2>1>0.
> +			 */
> +		case 2:	/* EUI-64 based */
> +			if ((dev_id->len != 8) && (dev_id->len != 12) &&
> +			    (dev_id->len != 16))
> +				break;
> +		case 3:	/* NAA */
> +			/* TODO: NAA validity judgement too complicated,
> +			 * so just ingore it here.
> +			 */
> +			if ((dev_id->type & 0xf) != 1) {
> +				BL_LOG_ERR("Binary code_set expected\n");
> +				break;
> +			}
> +		case 0:	/* vendor specific */
> +		case 1:	/* T10 vendor identification */
> +			current_id = dev_id->ids & 0xf;
> +			if (serial_out)
> +				bl_free_scsi_string(serial_out);
> +			serial_out = bl_create_scsi_string(dev_id->len,
> +							   dev_id->data);
> +			break;
> +		}
> +		if (current_id == 3)
> +			break;
> +		pos += (dev_id->len + sizeof(struct bl_dev_id) -
> +			sizeof(unsigned char));
> +	}
> + out:
> +	if (!serial_out)
> +		serial_out = bl_create_scsi_string(strlen(filename), filename);
> +	if (buffer)
> +		free(buffer);
> +	return serial_out;
> +}
> diff --git a/utils/blkmapd/device-process.c b/utils/blkmapd/device-process.c
> new file mode 100644
> index 0000000..27ff374
> --- /dev/null
> +++ b/utils/blkmapd/device-process.c
> @@ -0,0 +1,407 @@
> +/*
> + * device-process.c: detailed processing of device information sent
> + * from kernel.
> + *
> + * Copyright (c) 2006 The Regents of the University of Michigan.
> + * All rights reserved.
> + *
> + *  Andy Adamson <andros@xxxxxxxxxxxxxx>
> + *  Fred Isaman <iisaman@xxxxxxxxx>
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + *
> + * Used codes in linux/fs/nfs/blocklayout/blocklayoutdev.c.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/user.h>
> +#include <arpa/inet.h>
> +#include <linux/kdev_t.h>
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <syslog.h>
> +#include <fcntl.h>
> +#include <errno.h>
> +
> +#include "device-discovery.h"
> +
> +static char *pretty_sig(char *sig, uint32_t siglen)
> +{
> +	static char rs[100];
> +	uint64_t sigval;
> +	unsigned int i;
> +
> +	if (siglen <= sizeof(sigval)) {
> +		sigval = 0;
> +		for (i = 0; i < siglen; i++)
> +			sigval |= ((unsigned char *)sig)[i] << (i * 8);
> +		sprintf(rs, "0x%0llx", (unsigned long long) sigval);
> +	} else {
> +		if (siglen > sizeof rs - 4) {
> +			siglen = sizeof rs - 4;
> +			sprintf(&rs[siglen], "...");
> +		} else
> +			rs[siglen] = '\0';
> +		memcpy(rs, sig, siglen);
> +	}
> +	return rs;
> +}
> +
> +uint32_t *blk_overflow(uint32_t * p, uint32_t * end, size_t nbytes)
> +{
> +	uint32_t *q = p + ((nbytes + 3) >> 2);
> +
> +	if (q > end || q < p)
> +		return NULL;
> +	return p;
> +}
> +
> +static int decode_blk_signature(uint32_t **pp, uint32_t * end,
> +				struct bl_sig *sig)
> +{
> +	int i;
> +	uint32_t siglen, *p = *pp;
> +
> +	BLK_READBUF(p, end, 4);
> +	READ32(sig->si_num_comps);
> +	if (sig->si_num_comps == 0) {
> +		BL_LOG_ERR("0 components in sig\n");
> +		goto out_err;
> +	}
> +	if (sig->si_num_comps >= BLOCK_MAX_SIG_COMP) {
> +		BL_LOG_ERR("number of sig comps %i >= BLOCK_MAX_SIG_COMP\n",
> +			   sig->si_num_comps);
> +		goto out_err;
> +	}
> +	for (i = 0; i < sig->si_num_comps; i++) {
> +		struct bl_sig_comp *comp = &sig->si_comps[i];
> +
> +		BLK_READBUF(p, end, 12);
> +		READ64(comp->bs_offset);
> +		READ32(siglen);
> +		comp->bs_length = siglen;
> +		BLK_READBUF(p, end, siglen);
> +		/* Note we rely here on fact that sig is used immediately
> +		 * for mapping, then thrown away.
> +		 */
> +		comp->bs_string = (char *)p;
> +		BL_LOG_INFO("%s: si_comps[%d]: bs_length %d, bs_string %s\n",
> +			    __func__, i, siglen,
> +			    pretty_sig(comp->bs_string, siglen));
> +		p += ((siglen + 3) >> 2);
> +	}
> +	*pp = p;
> +	return 0;
> + out_err:
> +	return -EIO;
> +}
> +
> +/*
> + * Read signature from device and compare to sig_comp
> + * return: 0=match, 1=no match, -1=error
> + */
> +static int
> +read_cmp_blk_sig(struct bl_disk *disk, int fd, struct bl_sig_comp *comp)
> +{
> +	const char *dev_name = disk->valid_path->full_path;
> +	int ret = -1;
> +	ssize_t siglen = comp->bs_length;
> +	int64_t bs_offset = comp->bs_offset;
> +	char *sig = NULL;
> +
> +	sig = (char *)malloc(siglen);
> +	if (!sig) {
> +		BL_LOG_ERR("%s: Out of memory\n", __func__);
> +		goto out;
> +	}
> +
> +	if (bs_offset < 0)
> +		bs_offset += (((int64_t) disk->size) << 9);
> +	if (lseek64(fd, bs_offset, SEEK_SET) == -1) {
> +		BL_LOG_ERR("File %s lseek error\n", dev_name);
> +		goto out;
> +	}
> +
> +	if (read(fd, sig, siglen) != siglen) {
> +		BL_LOG_ERR("File %s read error\n", dev_name);
> +		goto out;
> +	}
> +
> +	ret = memcmp(sig, comp->bs_string, siglen);
> +	if (!ret)
> +		BL_LOG_INFO("%s: %s sig %s at %lld\n", __func__, dev_name,
> +			    pretty_sig(sig, siglen),
> +			    (long long)comp->bs_offset);
> +
> + out:
> +	if (sig)
> +		free(sig);
> +	return ret;
> +}
> +
> +/*
> + * All signatures in sig must be found on disk for verification.
> + * Returns True if sig matches, False otherwise.
> + */
> +static int verify_sig(struct bl_disk *disk, struct bl_sig *sig)
> +{
> +	const char *dev_name = disk->valid_path->full_path;
> +	int fd, i, rv;
> +
> +	fd = open(dev_name, O_RDONLY | O_LARGEFILE);
> +	if (fd < 0) {
> +		BL_LOG_ERR("%s: %s could not be opened for read\n", __func__,
> +			   dev_name);
> +		return 0;
> +	}
> +
> +	rv = 1;
> +
> +	for (i = 0; i < sig->si_num_comps; i++) {
> +		if (read_cmp_blk_sig(disk, fd, &sig->si_comps[i])) {
> +			rv = 0;
> +			break;
> +		}
> +	}
> +
> +	if (fd >= 0)
> +		close(fd);
> +	return rv;
> +}
> +
> +/*
> + * map_sig_to_device()
> + * Given a signature, walk the list of visible disks searching for
> + * a match. Returns True if mapping was done, False otherwise.
> + *
> + * While we're at it, fill in the vol->bv_size.
> + */
> +static int map_sig_to_device(struct bl_sig *sig, struct bl_volume *vol)
> +{
> +	int mapped = 0;
> +	struct bl_disk *disk;
> +
> +	/* scan disk list to find out match device */
> +	for (disk = visible_disk_list; disk; disk = disk->next) {
> +		/* FIXME: should we use better algorithm for disk scan? */
> +		mapped = verify_sig(disk, sig);
> +		if (mapped) {
> +			vol->param.bv_dev = disk->dev;
> +			vol->bv_size = disk->size;
> +			break;
> +		}
> +	}
> +	return mapped;
> +}
> +
> +/* We are given an array of XDR encoded array indices, each of which should
> + * refer to a previously decoded device.  Translate into a list of pointers
> + * to the appropriate pnfs_blk_volume's.
> + */
> +static int set_vol_array(uint32_t **pp, uint32_t *end,
> +			 struct bl_volume *vols, int working)
> +{
> +	int i, index;
> +	uint32_t *p = *pp;
> +	struct bl_volume **array = vols[working].bv_vols;
> +
> +	for (i = 0; i < vols[working].bv_vol_n; i++) {
> +		BLK_READBUF(p, end, 4);
> +		READ32(index);
> +		if ((index < 0) || (index >= working)) {
> +			BL_LOG_ERR("set_vol_array: Id %i out of range\n",
> +				   index);
> +			goto out_err;
> +		}
> +		array[i] = &vols[index];
> +	}
> +	*pp = p;
> +	return 0;
> + out_err:
> +	return -EIO;
> +}
> +
> +static uint64_t sum_subvolume_sizes(struct bl_volume *vol)
> +{
> +	int i;
> +	uint64_t sum = 0;
> +
> +	for (i = 0; i < vol->bv_vol_n; i++)
> +		sum += vol->bv_vols[i]->bv_size;
> +	return sum;
> +}
> +
> +static int
> +decode_blk_volume(uint32_t **pp, uint32_t *end, struct bl_volume *vols, int voln,
> +		  int *array_cnt)
> +{
> +	int status = 0, j;
> +	struct bl_sig sig;
> +	uint32_t *p = *pp;
> +	struct bl_volume *vol = &vols[voln];
> +	uint64_t tmp;
> +
> +	BLK_READBUF(p, end, 4);
> +	READ32(vol->bv_type);
> +
> +	switch (vol->bv_type) {
> +	case BLOCK_VOLUME_SIMPLE:
> +		*array_cnt = 0;
> +		status = decode_blk_signature(&p, end, &sig);
> +		if (status)
> +			return status;
> +		status = map_sig_to_device(&sig, vol);
> +		if (!status) {
> +			BL_LOG_ERR("Could not find disk for device\n");
> +			return -ENXIO;
> +		}
> +		BL_LOG_INFO("%s: simple %d\n", __func__, voln);
> +		status = 0;
> +		break;
> +	case BLOCK_VOLUME_SLICE:
> +		BLK_READBUF(p, end, 16);
> +		READ_SECTOR(vol->param.bv_offset);
> +		READ_SECTOR(vol->bv_size);
> +		*array_cnt = vol->bv_vol_n = 1;
> +		BL_LOG_INFO("%s: slice %d\n", __func__, voln);
> +		status = set_vol_array(&p, end, vols, voln);
> +		break;
> +	case BLOCK_VOLUME_STRIPE:
> +		BLK_READBUF(p, end, 8);
> +		READ_SECTOR(vol->param.bv_stripe_unit);
> +		off_t stripe_unit = vol->param.bv_stripe_unit;
> +		/* Check limitations imposed by device-mapper */
> +		if ((stripe_unit & (stripe_unit - 1)) != 0
> +		    || stripe_unit < (off_t) (PAGE_SIZE >> 9))
> +			return -EIO;
> +		BLK_READBUF(p, end, 4);
> +		READ32(vol->bv_vol_n);
> +		if (!vol->bv_vol_n)
> +			return -EIO;
> +		*array_cnt = vol->bv_vol_n;
> +		BL_LOG_INFO("%s: stripe %d nvols=%d unit=%ld\n", __func__, voln,
> +			    vol->bv_vol_n, (long)stripe_unit);
> +		status = set_vol_array(&p, end, vols, voln);
> +		if (status)
> +			return status;
> +		for (j = 1; j < vol->bv_vol_n; j++) {
> +			if (vol->bv_vols[j]->bv_size !=
> +			    vol->bv_vols[0]->bv_size) {
> +				BL_LOG_ERR("varying subvol size\n");
> +				return -EIO;
> +			}
> +		}
> +		vol->bv_size = vol->bv_vols[0]->bv_size * vol->bv_vol_n;
> +		break;
> +	case BLOCK_VOLUME_CONCAT:
> +		BLK_READBUF(p, end, 4);
> +		READ32(vol->bv_vol_n);
> +		if (!vol->bv_vol_n)
> +			return -EIO;
> +		*array_cnt = vol->bv_vol_n;
> +		BL_LOG_INFO("%s: concat %d %d\n", __func__, voln,
> +			    vol->bv_vol_n);
> +		status = set_vol_array(&p, end, vols, voln);
> +		if (status)
> +			return status;
> +		vol->bv_size = sum_subvolume_sizes(vol);
> +		break;
> +	default:
> +		BL_LOG_ERR("Unknown volume type %i\n", vol->bv_type);
> + out_err:
> +		return -EIO;
> +	}
> +	*pp = p;
> +	return status;
> +}
> +
> +uint64_t process_deviceinfo(const char *dev_addr_buf,
> +			    unsigned int dev_addr_len,
> +			    uint32_t *major, uint32_t *minor)
> +{
> +	int num_vols, i, status, count;
> +	uint32_t *p, *end;
> +	struct bl_volume *vols = NULL, **arrays = NULL, **arrays_ptr = NULL;
> +	uint64_t dev = 0;
> +
> +	p = (uint32_t *) dev_addr_buf;
> +	end = (uint32_t *) ((char *)p + dev_addr_len);
> +
> +	/* Decode block volume */
> +	BLK_READBUF(p, end, 4);
> +	READ32(num_vols);
> +	BL_LOG_INFO("%s: %d vols\n", __func__, num_vols);
> +	if (num_vols <= 0)
> +		goto out_err;
> +
> +	vols = (struct bl_volume *)malloc(num_vols * sizeof(struct bl_volume));
> +	if (!vols) {
> +		BL_LOG_ERR("%s: Out of memory\n", __func__);
> +		goto out_err;
> +	}
> +
> +	/* Each volume in vols array needs its own array.  Save time by
> +	 * allocating them all in one large hunk.  Because each volume
> +	 * array can only reference previous volumes, and because once
> +	 * a concat or stripe references a volume, it may never be
> +	 * referenced again, the volume arrays are guaranteed to fit
> +	 * in the suprisingly small space allocated.
> +	 */
> +	arrays_ptr = arrays =
> +	    (struct bl_volume **)malloc(num_vols * 2 *
> +					sizeof(struct bl_volume *));
> +	if (!arrays) {
> +		BL_LOG_ERR("%s: Out of memory\n", __func__);
> +		goto out_err;
> +	}
> +
> +	for (i = 0; i < num_vols; i++) {
> +		vols[i].bv_vols = arrays_ptr;
> +		status = decode_blk_volume(&p, end, vols, i, &count);
> +		if (status)
> +			goto out_err;
> +		arrays_ptr += count;
> +	}
> +
> +	if (p != end) {
> +		BL_LOG_ERR("p is not equal to end!\n");
> +		goto out_err;
> +	}
> +
> +	dev = dm_device_create(vols, num_vols);
> +	if (dev) {
> +		*major = MAJOR(dev);
> +		*minor = MINOR(dev);
> +	}
> +
> + out_err:
> +	if (vols)
> +		free(vols);
> +	if (arrays)
> +		free(arrays);
> +	return dev;
> +}
> diff --git a/utils/blkmapd/dm-device.c b/utils/blkmapd/dm-device.c
> new file mode 100644
> index 0000000..0f4f148
> --- /dev/null
> +++ b/utils/blkmapd/dm-device.c
> @@ -0,0 +1,518 @@
> +/*
> + * dm-device.c: create or remove device via device mapper API.
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <linux/kdev_t.h>
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <unistd.h>
> +#include <string.h>
> +#include <syslog.h>
> +#include <fcntl.h>
> +#include <errno.h>
> +#include <libdevmapper.h>
> +
> +#include "device-discovery.h"
> +
> +#define DM_DEV_NAME_LEN		256
> +
> +#ifndef DM_MAX_TYPE_NAME
> +#define DM_MAX_TYPE_NAME	16
> +#endif
> +
> +#define DM_PARAMS_LEN		512	/* XXX: is this enough for target? */
> +#define TYPE_HAS_DEV(type)	((type == BLOCK_VOLUME_SIMPLE) || \
> +			 (type == BLOCK_VOLUME_PSEUDO))
> +
> +struct bl_dm_table {
> +	uint64_t offset;
> +	uint64_t size;
> +	char target_type[DM_MAX_TYPE_NAME];
> +	char params[DM_PARAMS_LEN];
> +	struct bl_dm_table *next;
> +};
> +
> +struct bl_dm_tree {
> +	uint64_t dev;
> +	struct dm_tree *tree;
> +	struct bl_dm_tree *next;
> +};
> +
> +static const char dm_name[] = "pnfs_vol_%u";
> +
> +static unsigned int dev_count;
> +
> +static inline struct bl_dm_table *bl_dm_table_alloc(void)
> +{
> +	return (struct bl_dm_table *)calloc(1, sizeof(struct bl_dm_table));
> +}
> +
> +static void bl_dm_table_free(struct bl_dm_table *bl_table_head)
> +{
> +	struct bl_dm_table *p;
> +
> +	while (bl_table_head) {
> +		p = bl_table_head->next;
> +		free(bl_table_head);
> +		bl_table_head = p;
> +	}
> +}
> +
> +static void add_to_bl_dm_table(struct bl_dm_table **bl_table_head,
> +			struct bl_dm_table *table)
> +{
> +	struct bl_dm_table *p;
> +
> +	if (!*bl_table_head) {
> +		*bl_table_head = table;
> +		return;
> +	}
> +	p = *bl_table_head;
> +	while (p->next)
> +		p = p->next;
> +	p->next = table;
> +}
> +
> +struct bl_dm_tree *bl_tree_head;
> +
> +static struct bl_dm_tree *find_bl_dm_tree(uint64_t dev)
> +{
> +	struct bl_dm_tree *p;
> +
> +	for (p = bl_tree_head; p; p = p->next) {
> +		if (p->dev == dev)
> +			break;
> +	}
> +	return p;
> +}
> +
> +static void del_from_bl_dm_tree(uint64_t dev)
> +{
> +	struct bl_dm_tree *p, *pre = bl_tree_head;
> +
> +	for (p = pre; p; p = p->next) {
> +		if (p->dev == dev) {
> +			pre->next = p->next;
> +			if (p == bl_tree_head)
> +				bl_tree_head = bl_tree_head->next;
> +			free(p);
> +			break;
> +		}
> +		pre = p;
> +	}
> +}
> +
> +static void add_to_bl_dm_tree(struct bl_dm_tree *tree)
> +{
> +	struct bl_dm_tree *p;
> +
> +	if (!bl_tree_head) {
> +		bl_tree_head = tree;
> +		return;
> +	}
> +	p = bl_tree_head;
> +	while (p->next)
> +		p = p->next;
> +	p->next = tree;
> +	return;
> +}
> +
> +/*
> + * Create device via device mapper
> + * return 0 when creation failed
> + * return dev no for created device
> + */
> +static uint64_t
> +dm_device_create_mapped(const char *dev_name, struct bl_dm_table *p)
> +{
> +	struct dm_task *dmt;
> +	struct dm_info dminfo;
> +	int ret = 0;
> +
> +	dmt = dm_task_create(DM_DEVICE_CREATE);
> +	if (!dmt) {
> +		BL_LOG_ERR("Create dm_task for %s failed\n", dev_name);
> +		return 0;
> +	}
> +	ret = dm_task_set_name(dmt, dev_name);
> +	if (!ret)
> +		goto err_out;
> +
> +	while (p) {
> +		ret =
> +		    dm_task_add_target(dmt, p->offset, p->size, p->target_type,
> +				       p->params);
> +		if (!ret)
> +			goto err_out;
> +		p = p->next;
> +	}
> +
> +	ret = dm_task_run(dmt) && dm_task_get_info(dmt, &dminfo)
> +	    && dminfo.exists;
> +
> +	if (!ret)
> +		goto err_out;
> +
> +	dm_task_update_nodes();
> +
> + err_out:
> +	dm_task_destroy(dmt);
> +
> +	if (!ret) {
> +		BL_LOG_ERR("Create device %s failed\n", dev_name);
> +		return 0;
> +	}
> +	return MKDEV(dminfo.major, dminfo.minor);
> +}
> +
> +static int dm_device_remove_byname(const char *dev_name)
> +{
> +	struct dm_task *dmt;
> +	int ret = 0;
> +
> +	BL_LOG_INFO("%s: %s\n", __func__, dev_name);
> +
> +	dmt = dm_task_create(DM_DEVICE_REMOVE);
> +	if (!dmt)
> +		return 0;
> +
> +	ret = dm_task_set_name(dmt, dev_name) && dm_task_run(dmt);
> +
> +	dm_task_update_nodes();
> +	dm_task_destroy(dmt);
> +
> +	return ret;
> +}
> +
> +int dm_device_remove(uint64_t dev)
> +{
> +	struct dm_task *dmt;
> +	struct dm_names *dmnames;
> +	char *name = NULL;
> +	int ret = 0;
> +
> +	/* Look for dev_name via dev, if dev_name could be transferred here,
> +	   we could jump to DM_DEVICE_REMOVE directly */
> +
> +	dmt = dm_task_create(DM_DEVICE_LIST);
> +	if (!dmt) {
> +		BL_LOG_ERR("dm_task creation failed\n");
> +		goto out;
> +	}
> +
> +	ret = dm_task_run(dmt);
> +	if (!ret) {
> +		BL_LOG_ERR("dm_task_run failed\n");
> +		goto out;
> +	}
> +
> +	dmnames = dm_task_get_names(dmt);
> +	if (!dmnames || !dmnames->dev) {
> +		BL_LOG_ERR("dm_task_get_names failed\n");
> +		goto out;
> +	}
> +
> +	while (dmnames) {
> +		if (dmnames->dev == dev) {
> +			name = strdup(dmnames->name);
> +			break;
> +		}
> +		dmnames = (void *)dmnames + dmnames->next;
> +	}
> +
> +	if (!name) {
> +		BL_LOG_ERR("Could not find device\n");
> +		goto out;
> +	}
> +
> +	dm_task_update_nodes();
> +
> + out:
> +	if (dmt)
> +		dm_task_destroy(dmt);
> +
> +	/* Start to remove device */
> +	if (name) {
> +		ret = dm_device_remove_byname(name);
> +		free(name);
> +	}
> +
> +	return ret;
> +}
> +
> +static void dm_devicelist_remove(unsigned int start, unsigned int end)
> +{
> +	char dev_name[DM_DEV_NAME_LEN];
> +	unsigned int count;
> +
> +	if (start >= dev_count || end <= 1 || start >= end - 1)
> +		return;
> +
> +	for (count = end - 1; count > start; count--) {
> +		snprintf(dev_name, sizeof dev_name, dm_name, count - 1);
> +		dm_device_remove_byname(dev_name);
> +	}
> +
> +	return;
> +}
> +
> +static void bl_dm_remove_tree(uint64_t dev)
> +{
> +	struct bl_dm_tree *p;
> +
> +	p = find_bl_dm_tree(dev);
> +	if (!p)
> +		return;
> +
> +	dm_tree_free(p->tree);
> +	del_from_bl_dm_tree(dev);
> +}
> +
> +static int bl_dm_create_tree(uint64_t dev)
> +{
> +	struct dm_tree *tree;
> +	struct bl_dm_tree *bl_tree;
> +
> +	bl_tree = find_bl_dm_tree(dev);
> +	if (bl_tree)
> +		return 1;
> +
> +	tree = dm_tree_create();
> +	if (!tree)
> +		return 0;
> +
> +	if (!dm_tree_add_dev(tree, MAJOR(dev), MINOR(dev))) {
> +		dm_tree_free(tree);
> +		return 0;
> +	}
> +
> +	bl_tree = malloc(sizeof(struct bl_dm_tree));
> +	if (!bl_tree) {
> +		dm_tree_free(tree);
> +		return 0;
> +	}
> +
> +	bl_tree->dev = dev;
> +	bl_tree->tree = tree;
> +	bl_tree->next = NULL;
> +	add_to_bl_dm_tree(bl_tree);
> +
> +	return 1;
> +}
> +
> +int dm_device_remove_all(uint64_t *dev)
> +{
> +	struct bl_dm_tree *p;
> +	struct dm_tree_node *node;
> +	const char *uuid;
> +	int ret = 0;
> +	uint32_t major, minor;
> +	uint64_t bl_dev;
> +
> +	memcpy(&major, dev, sizeof(uint32_t));
> +	memcpy(&minor, (void *)dev + sizeof(uint32_t), sizeof(uint32_t));
> +	bl_dev = MKDEV(major, minor);
> +	p = find_bl_dm_tree(bl_dev);
> +	if (!p)
> +		return ret;
> +
> +	node = dm_tree_find_node(p->tree, MAJOR(bl_dev), MINOR(bl_dev));
> +	if (!node)
> +		return ret;
> +
> +	uuid = dm_tree_node_get_uuid(node);
> +	if (!uuid)
> +		return ret;
> +
> +	dm_device_remove(bl_dev);
> +	ret = dm_tree_deactivate_children(node, uuid, strlen(uuid));
> +	dm_task_update_nodes();
> +	bl_dm_remove_tree(bl_dev);
> +
> +	return ret;
> +}
> +
> +static int dm_device_exists(char *dev_name)
> +{
> +	char fullname[DM_DEV_NAME_LEN];
> +
> +	snprintf(fullname, sizeof fullname, "/dev/mapper/%s", dev_name);
> +	return (access(fullname, F_OK) >= 0);
> +}
> +
> +/* TODO: check the value for DM_DEV_NAME_LEN, DM_TYPE_LEN, DM_PARAMS_LEN */
> +uint64_t dm_device_create(struct bl_volume *vols, int num_vols)
> +{
> +	uint64_t size, stripe_unit, dev = 0;
> +	unsigned int count = dev_count;
> +	int volnum, i, pos;
> +	struct bl_volume *node;
> +	char *tmp;
> +	struct bl_dm_table *table = NULL;
> +	struct bl_dm_table *bl_table_head = NULL;
> +	unsigned int len;
> +	char *dev_name = NULL;
> +
> +	/* Create pseudo device here */
> +	for (volnum = 0; volnum < num_vols; volnum++) {
> +		node = &vols[volnum];
> +		switch (node->bv_type) {
> +		case BLOCK_VOLUME_SIMPLE:
> +			/* Do not need to create device here */
> +			dev = node->param.bv_dev;
> +			goto continued;
> +		case BLOCK_VOLUME_SLICE:
> +			table = bl_dm_table_alloc();
> +			if (!table)
> +				goto out;
> +			table->offset = 0;
> +			table->size = node->bv_size;
> +			strcpy(table->target_type, "linear");
> +			if (!TYPE_HAS_DEV(node->bv_vols[0]->bv_type)) {
> +				free(table);
> +				goto out;
> +			}
> +			dev = node->bv_vols[0]->param.bv_dev;
> +			tmp = table->params;
> +			if (!dm_format_dev(tmp, DM_PARAMS_LEN,
> +					   MAJOR(dev), MINOR(dev))) {
> +				free(table);
> +				goto out;
> +			}
> +			tmp += strlen(tmp);
> +			sprintf(tmp, " %lu", node->param.bv_offset);
> +			add_to_bl_dm_table(&bl_table_head, table);
> +			break;
> +		case BLOCK_VOLUME_STRIPE:
> +			table = bl_dm_table_alloc();
> +			if (!table)
> +				goto out;
> +			table->offset = 0;
> +			/* Truncate size to a stripe unit boundary */
> +			stripe_unit = node->param.bv_stripe_unit;
> +			table->size =
> +			    node->bv_size - (node->bv_size % stripe_unit);
> +			strcpy(table->target_type, "striped");
> +			sprintf(table->params, "%d %llu %n", node->bv_vol_n,
> +				(long long unsigned) stripe_unit, &pos);
> +			/* Copy subdev major:minor to params */
> +			tmp = table->params + pos;
> +			len = DM_PARAMS_LEN - pos;
> +			for (i = 0; i < node->bv_vol_n; i++) {
> +				if (!TYPE_HAS_DEV(node->bv_vols[i]->bv_type)) {
> +					free(table);
> +					goto out;
> +				}
> +				dev = node->bv_vols[i]->param.bv_dev;
> +				if (!dm_format_dev(tmp, len, MAJOR(dev),
> +						   MINOR(dev))) {
> +					free(table);
> +					goto out;
> +				}
> +				pos = strlen(tmp);
> +				tmp += pos;
> +				len -= pos;
> +				sprintf(tmp, " %d ", 0);
> +				tmp += 3;
> +				len -= 3;
> +			}
> +			add_to_bl_dm_table(&bl_table_head, table);
> +			break;
> +		case BLOCK_VOLUME_CONCAT:
> +			size = 0;
> +			for (i = 0; i < node->bv_vol_n; i++) {
> +				table = bl_dm_table_alloc();
> +				if (!table)
> +					goto out;
> +				table->offset = size;
> +				table->size = node->bv_vols[i]->bv_size;
> +				if (!TYPE_HAS_DEV(node->bv_vols[i]->bv_type)) {
> +					free(table);
> +					goto out;
> +				}
> +				strcpy(table->target_type, "linear");
> +				tmp = table->params;
> +				dev = node->bv_vols[i]->param.bv_dev;
> +				if (!dm_format_dev(tmp, DM_PARAMS_LEN,
> +						   MAJOR(dev), MINOR(dev))) {
> +					free(table);
> +					goto out;
> +				}
> +				tmp += strlen(tmp);
> +				sprintf(tmp, " %d", 0);
> +				size += table->size;
> +				add_to_bl_dm_table(&bl_table_head, table);
> +			}
> +			break;
> +		default:
> +			/* Delete previous temporary devices */
> +			dm_devicelist_remove(count, dev_count);
> +			goto out;
> +		}		/* end of swtich */
> +		/* Create dev_name here. Name of device is pnfs_vol_XXX */
> +		if (dev_name)
> +			free(dev_name);
> +		dev_name = (char *)calloc(DM_DEV_NAME_LEN, sizeof(char));
> +		if (!dev_name) {
> +			BL_LOG_ERR("%s: Out of memory\n", __func__);
> +			goto out;
> +		}
> +		do {
> +			snprintf(dev_name, DM_DEV_NAME_LEN, dm_name,
> +				 dev_count++);
> +		} while (dm_device_exists(dev_name));
> +
> +		dev = dm_device_create_mapped(dev_name, bl_table_head);
> +		BL_LOG_INFO("%s: %d %s %d:%d\n", __func__, volnum, dev_name,
> +			    (int) MAJOR(dev), (int) MINOR(dev));
> +		if (!dev) {
> +			/* Delete previous temporary devices */
> +			dm_devicelist_remove(count, dev_count);
> +			goto out;
> +		}
> +		node->param.bv_dev = dev;
> +		/* TODO: extend use with PSEUDO later */
> +		node->bv_type = BLOCK_VOLUME_PSEUDO;
> +
> + continued:
> +		if (bl_table_head)
> +			bl_dm_table_free(bl_table_head);
> +		bl_table_head = NULL;
> +	}
> + out:
> +	if (bl_table_head) {
> +		bl_dm_table_free(bl_table_head);
> +		bl_table_head = NULL;
> +	}
> +	if (dev)
> +		bl_dm_create_tree(dev);
> +	if (dev_name)
> +		free(dev_name);
> +	return dev;
> +}
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux