Re: Cross-compiling nfs-utils 1.1.4 for ARM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/25/2011 12:32 PM, Kevin Coffman wrote:
On Tue, Jan 25, 2011 at 2:56 PM, Patrick Dignan<pdignan@xxxxxxxxxx>  wrote:
On 01/25/2011 04:58 AM, Steve Dickson wrote:
On 01/24/2011 05:15 PM, Patrick Dignan wrote:
Hi,

I'm attempting to cross-compile nfs-utils 1.1.4 for ARM on an x86_64
build machine.  I can cross-compile other software, but nfs-utils fails.  I
get the following error:

gcc -DHAVE_CONFIG_H -I. -I../../support/include  -D_GNU_SOURCE
-D_GNU_SOURCE  -O2 -pipe -I/build/tegra2_seaboard/usr/include/
-I/build/tegra2_seaboard/include/ -ggdb -march=armv7-a -mtune=cortex-a8
-mfpu=vfpv3-d16 -mfloat-abi=softfp -MT testlk-testlk.o -MD -MP -MF
.deps/testlk-testlk.Tpo -c -o testlk-testlk.o `test -f 'testlk.c' || echo
'./'`testlk.c
cc1: error: unrecognized command line option "-mfpu=vfpv3-d16"
cc1: error: unrecognized command line option "-mfloat-abi=softfp"
testlk.c:1: error: bad value (armv7-a) for -march= switch
testlk.c:1: error: bad value (cortex-a8) for -mtune= switch

I'm guessing there's some sort of problem in Makefile.am that's causing
it to fail, but I am not sure what changes I need to make.  Does anyone know
the solution to this problem or where I might start looking to fix this?
My guess would be your cross-compiler is added those to the CFLAGS because
those flags are not set on a "normal" compilation...

steved.

Best,

Patrick Dignan
I believe you are correct, however I think it should be using the ARM
specific compiler when trying to cross-compile.  I don't know enough about
automake and cross-compiling to be sure, but I think that it doesn't set the
CC variable correctly.  It does seem to configure correctly though, since it
shows the proper compiler being found: "checking for
armv7a-cros-linux-gnueabi-gcc... (cached) armv7a-cros-linux-gnueabi-gcc",
but then it uses the normal gcc.

Thanks for the help!

Best,

Patrick Dignan
This is just a guess, but I'm suspicious of these lines in
tools/locktest/Makefile.am:

CC=$(CC_FOR_BUILD)
LIBTOOL = @LIBTOOL@ --tag=CC

This might have been an oversite when the original conversion to
automake was done.  What happens if you comment those lines out (and
then re-run autogen.sh)?  Note that Makefile.am for rpcgen and
rpcdebug also have these lines, but they may not need to be built when
cross-compiling?

K.C.
Hi Kevin,

You're absolutely right. After I removed those lines from tools/locktest/Makefile.am, tools/rpcdebug/Makefile.am, and tools/rpcgen/Makefile.am the compile worked successfully.

Thanks for the help!

Here's the patch. I haven't tested it yet, but it allowed me to compile nfs-utils, so it may at least help others out.

Best,

Patrick Dignan

diff -Naurb nfs-utils-1.1.4.orig/tools/locktest/Makefile.am nfs-utils-1.1.4.mod/tools/locktest/Makefile.am --- nfs-utils-1.1.4.orig/tools/locktest/Makefile.am 2008-10-17 07:20:09.000000000 -0700 +++ nfs-utils-1.1.4.mod/tools/locktest/Makefile.am 2011-01-25 13:43:13.166298908 -0800
@@ -1,8 +1,5 @@
 ## Process this file with automake to produce Makefile.in

-CC=$(CC_FOR_BUILD)
-LIBTOOL = @LIBTOOL@ --tag=CC
-
 noinst_PROGRAMS = testlk
 testlk_SOURCES = testlk.c
 testlk_CFLAGS=$(CFLAGS_FOR_BUILD)
diff -Naurb nfs-utils-1.1.4.orig/tools/rpcdebug/Makefile.am nfs-utils-1.1.4.mod/tools/rpcdebug/Makefile.am --- nfs-utils-1.1.4.orig/tools/rpcdebug/Makefile.am 2008-10-17 07:20:09.000000000 -0700 +++ nfs-utils-1.1.4.mod/tools/rpcdebug/Makefile.am 2011-01-25 13:43:23.567549833 -0800
@@ -1,8 +1,5 @@
 ## Process this file with automake to produce Makefile.in

-CC=$(CC_FOR_BUILD)
-LIBTOOL = @LIBTOOL@ --tag=CC
-
 man8_MANS = rpcdebug.man
 EXTRA_DIST = $(man8_MANS)

diff -Naurb nfs-utils-1.1.4.orig/tools/rpcgen/Makefile.am nfs-utils-1.1.4.mod/tools/rpcgen/Makefile.am --- nfs-utils-1.1.4.orig/tools/rpcgen/Makefile.am 2008-10-17 07:20:09.000000000 -0700 +++ nfs-utils-1.1.4.mod/tools/rpcgen/Makefile.am 2011-01-25 13:43:34.836298823 -0800
@@ -1,8 +1,5 @@
 ## Process this file with automake to produce Makefile.in

-CC=$(CC_FOR_BUILD)
-LIBTOOL = @LIBTOOL@ --tag=CC
-
 noinst_PROGRAMS = rpcgen
 rpcgen_SOURCES = rpc_clntout.c rpc_cout.c rpc_hout.c rpc_main.c \
                 rpc_parse.c rpc_scan.c rpc_svcout.c rpc_tblout.c \



-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux