Re: [PATCH] nfs-utils: add nfs.idmap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Bryan,

A couple nits.... which I will be more than willing to take of... 

1) I would like to change the binary name from nfs.idmap to nfsidmap
   which is consistent with how the rest of the binaries are named.
   (i.e. binary names generally don't have any '.' or '-' in them)
   
2) Change the source directory from utils/nfs.idmap to 
   utils/idmap which again makes it consistent with what
   is already there. 

3) The man page talks about a /usr/sbin/idmap file and then
   later talks about a /usr/sbin/nfs.idmap program. Can I 
   assume those are same binary, since I only see on binary
   being installed? Also, maybe we should move the binary to
   /sbin so it would be available early in the boot

Comments?

steved.

On 10/26/2010 01:17 PM, Bryan Schumaker wrote:
> Here is an updated patch.
> -Bryan
> 
> 
> 
> This patch adds the nfs.idmap program to nfs-utils.  This program is called by
> the nfs idmapper through request-keys to map between uid / user name and
> gid / group name.
> 
> Signed-off-by: Bryan Schumaker <bjschuma@xxxxxxxxxx>
> ---
> diff --git a/aclocal/keyutils.m4 b/aclocal/keyutils.m4
> new file mode 100644
> index 0000000..84bc112
> --- /dev/null
> +++ b/aclocal/keyutils.m4
> @@ -0,0 +1,11 @@
> +dnl Checks for keyutils library and headers
> +dnl
> +AC_DEFUN([AC_KEYUTILS], [
> +
> +  dnl Check for libkeyutils; do not add to LIBS if found
> +  AC_CHECK_LIB([keyutils], [keyctl_instantiate], [LIBKEYUTILS=-lkeyutils], ,)
> +  AC_SUBST(LIBKEYUTILS)
> +
> +  AC_CHECK_HEADERS([keyutils.h], ,
> +  		   [AC_MSG_ERROR([keyutils.h header not found.])])
> +])dnl
> diff --git a/configure.ac b/configure.ac
> index 3058be6..0907f72 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -247,6 +247,9 @@ if test "$enable_nfsv4" = yes; then
>    dnl check for nfsidmap libraries and headers
>    AC_LIBNFSIDMAP
>  
> +  dnl check for the keyutils libraries and headers
> +  AC_KEYUTILS
> +
>    dnl librpcsecgss already has a dependency on libgssapi,
>    dnl but we need to make sure we get the right version
>    if test "$enable_gss" = yes; then
> @@ -435,6 +438,7 @@ AC_CONFIG_FILES([
>  	utils/mountd/Makefile
>  	utils/nfsd/Makefile
>  	utils/nfsstat/Makefile
> +	utils/nfs.idmap/Makefile
>  	utils/showmount/Makefile
>  	utils/statd/Makefile
>  	tests/Makefile
> diff --git a/utils/Makefile.am b/utils/Makefile.am
> index 8665183..332ecff 100644
> --- a/utils/Makefile.am
> +++ b/utils/Makefile.am
> @@ -4,6 +4,7 @@ OPTDIRS =
>  
>  if CONFIG_NFSV4
>  OPTDIRS += idmapd
> +OPTDIRS += nfs.idmap
>  endif
>  
>  if CONFIG_GSS
> diff --git a/utils/nfs.idmap/Makefile.am b/utils/nfs.idmap/Makefile.am
> new file mode 100644
> index 0000000..29e17af
> --- /dev/null
> +++ b/utils/nfs.idmap/Makefile.am
> @@ -0,0 +1,9 @@
> +## Process this file with automake to produce Makefile.in
> +
> +man8_MANS = nfs.idmap.man
> +
> +sbin_PROGRAMS	= nfs.idmap
> +nfs_idmap_SOURCES = nfs.idmap.c
> +nfs_idmap_LDADD = -lnfsidmap -lkeyutils
> +
> +MAINTAINERCLEANFILES = Makefile.in
> diff --git a/utils/nfs.idmap/nfs.idmap.c b/utils/nfs.idmap/nfs.idmap.c
> new file mode 100644
> index 0000000..abbcb65
> --- /dev/null
> +++ b/utils/nfs.idmap/nfs.idmap.c
> @@ -0,0 +1,118 @@
> +
> +#include <stdarg.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +
> +#include <pwd.h>
> +#include <grp.h>
> +#include <keyutils.h>
> +#include <nfsidmap.h>
> +
> +#include <syslog.h>
> +
> +/* gcc nfs.idmap.c -o nfs.idmap -l nfsidmap -l keyutils */
> +
> +#define MAX_ID_LEN   11
> +#define IDMAP_NAMESZ 128
> +#define USER  1
> +#define GROUP 0
> +
> +
> +/*
> + * Find either a user or group id based on the name@domain string
> + */
> +int id_lookup(char *name_at_domain, key_serial_t key, int type)
> +{
> +	char id[MAX_ID_LEN];
> +	uid_t uid = 0;
> +	gid_t gid = 0;
> +	int rc;
> +
> +	if (type == USER) {
> +		rc = nfs4_owner_to_uid(name_at_domain, &uid);
> +		sprintf(id, "%u", uid);
> +	} else {
> +		rc = nfs4_group_owner_to_gid(name_at_domain, &gid);
> +		sprintf(id, "%u", gid);
> +	}
> +
> +	if (rc == 0)
> +		rc = keyctl_instantiate(key, id, strlen(id) + 1, 0);
> +
> +	return rc;
> +}
> +
> +/*
> + * Find the name@domain string from either a user or group id
> + */
> +int name_lookup(char *id, key_serial_t key, int type)
> +{
> +	char name[IDMAP_NAMESZ];
> +	char domain[NFS4_MAX_DOMAIN_LEN];
> +	uid_t uid;
> +	gid_t gid;
> +	int rc;
> +
> +	rc = nfs4_get_default_domain(NULL, domain, NFS4_MAX_DOMAIN_LEN);
> +	if (rc != 0) {
> +		rc = -1;
> +		goto out;
> +	}
> +
> +	if (type == USER) {
> +		uid = atoi(id);
> +		rc = nfs4_uid_to_name(uid, domain, name, IDMAP_NAMESZ);
> +	} else {
> +		gid = atoi(id);
> +		rc = nfs4_gid_to_name(gid, domain, name, IDMAP_NAMESZ);
> +	}
> +
> +	if (rc == 0)
> +		rc = keyctl_instantiate(key, &name, strlen(name), 0);
> +
> +out:
> +	return rc;
> +}
> +
> +int main(int argc, char **argv)
> +{
> +	char *arg;
> +	char *value;
> +	char *type;
> +	int rc = 1;
> +	int timeout = 600;
> +	key_serial_t key;
> +
> +	if (argc < 3)
> +		return 1;
> +
> +	arg = malloc(sizeof(char) * strlen(argv[2]) + 1);
> +	strcpy(arg, argv[2]);
> +	type = strtok(arg, ":");
> +	value = strtok(NULL, ":");
> +
> +	if (argc == 4) {
> +		timeout = atoi(argv[3]);
> +		if (timeout < 0)
> +			timeout = 0;
> +	}
> +
> +	key = strtol(argv[1], NULL, 10);
> +
> +	if (strcmp(type, "uid") == 0)
> +		rc = id_lookup(value, key, USER);
> +	else if (strcmp(type, "gid") == 0)
> +		rc = id_lookup(value, key, GROUP);
> +	else if (strcmp(type, "user") == 0)
> +		rc = name_lookup(value, key, USER);
> +	else if (strcmp(type, "group") == 0)
> +		rc = name_lookup(value, key, GROUP);
> +
> +	/* Set timeout to 5 (600 seconds) minutes */
> +	if (rc == 0)
> +		keyctl_set_timeout(key, timeout);
> +
> +	free(arg);
> +	return rc;
> +}
> diff --git a/utils/nfs.idmap/nfs.idmap.man b/utils/nfs.idmap/nfs.idmap.man
> new file mode 100644
> index 0000000..9008dd9
> --- /dev/null
> +++ b/utils/nfs.idmap/nfs.idmap.man
> @@ -0,0 +1,60 @@
> +.\"
> +.\"@(#)nfs.idmap(8) - The NFS idmapper upcall program
> +.\"
> +.\" Copyright (C) 2010 Bryan Schumaker <bjschuma@xxxxxxxxxx>
> +.TH nfs.idmap 5 "1 October 2010"
> +.SH NAME
> +nfs.idmap \- The NFS idmapper upcall program
> +.SH DESCRIPTION
> +The file
> +.I /usr/sbin/idmap
> +is used by the NFS idmapper to translate user and group ids into names, and to
> +translate user and group names into ids. Idmapper uses request-key to perform
> +the upcall and cache the result.
> +.I /usr/sbin/idmap
I'm assuming this should be 
> +should only be called by request-key, and will perform the translation and
> +initialize a key with the resulting information.
> +.PP
> +NFS_USE_NEW_IDMAPPER must be selected when configuring the kernel to use this
> +feature.
> +.SH CONFIGURING
> +The file
> +.I /etc/request-key.conf
> +will need to be modified so
> +.I /sbin/request-key
> +can properly direct the upcall. The following line should be added before a call
> +to keyctl negate:
> +.PP
> +create	id_resolver	*	*	/usr/sbin/nfs.idmap %k %d 600
> +.PP
> +This will direct all nfs_idmap requests to the program
> +.I /usr/sbin/nfs.idmap
> +The last parameter, 600, defines how many seconds into the future the key will
> +expire.  This is an optional parameter for
> +.I /usr/sbin/nfs.idmap
> +and will default to 600 seconds when not specified.
> +.PP
> +The idmapper system uses four key descriptions:
> +.PP
> +	  uid: Find the UID for the given user
> +.br
> +	  gid: Find the GID for the given group
> +.br
> +	 user: Find the user name for the given UID
> +.br
> +	group: Find the group name for the given GID
> +.PP
> +You can choose to handle any of these individually, rather than using the
> +generic upcall program.  If you would like to use your own program for a uid
> +lookup then you would edit your request-key.conf so it looks similar to this:
> +.PP
> +create	id_resolver	uid:*	*	/some/other/program %k %d 600
> +.br
> +create	id_resolver	*		*	/usr/sbin/nfs.idmap %k %d 600
> +.PP
> +Notice that the new line was added above the line for the generic program.
> +request-key will find the first matching line and run the corresponding program.
> +In this case, /some/other/program will handle all uid lookups, and
> +/usr/sbin/nfs.idmap will handle gid, user, and group lookups.
> +.SH AUTHOR
> +Bryan Schumaker, <bjschuma@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux