Thanks! merged.
Benny
On Aug. 11, 2010, 22:42 +0300, Jim Rees <rees@xxxxxxxxx> wrote:
> This is a replacement for the patch I sent 21 July, incorporating feedback
> from list members. Thank you for your comments.
>
> I have tried to settle on "blkmapd" as the name and use it consistently for
> the executable, service name, syslog, etc.
>
> I did not change atomicio.c. That's because this is a copy of the file by
> the same name in both idmapd and spnfsd. There is a patch in the works to
> move this to the support library. I think the right thing to do is move
> that patch forward, then fix atomicio.
>
> Signed-off-by: Jim Rees <rees@xxxxxxxxx>
> ---
> configure.ac | 4 +
> utils/Makefile.am | 4 +
> utils/blkmapd/Makefile.am | 63 +++++
> utils/blkmapd/atomicio.c | 54 ++++
> utils/blkmapd/cfg.c | 248 +++++++++++++++++
> utils/blkmapd/cfg.h | 47 +++
> utils/blkmapd/device-discovery.c | 502 +++++++++++++++++++++++++++++++++
> utils/blkmapd/device-discovery.h | 162 +++++++++++
> utils/blkmapd/device-inq.c | 235 ++++++++++++++++
> utils/blkmapd/device-process.c | 394 ++++++++++++++++++++++++++
> utils/blkmapd/dm-device.c | 509 ++++++++++++++++++++++++++++++++++
> utils/blkmapd/etc/blkmapd.conf | 10 +
> utils/blkmapd/etc/initd/initd.redhat | 76 +++++
> 13 files changed, 2308 insertions(+), 0 deletions(-)
> create mode 100644 utils/blkmapd/Makefile.am
> create mode 100644 utils/blkmapd/atomicio.c
> create mode 100644 utils/blkmapd/cfg.c
> create mode 100644 utils/blkmapd/cfg.h
> create mode 100644 utils/blkmapd/device-discovery.c
> create mode 100644 utils/blkmapd/device-discovery.h
> create mode 100644 utils/blkmapd/device-inq.c
> create mode 100644 utils/blkmapd/device-process.c
> create mode 100644 utils/blkmapd/dm-device.c
> create mode 100644 utils/blkmapd/etc/blkmapd.conf
> create mode 100644 utils/blkmapd/etc/initd/initd.redhat
>
> diff --git a/configure.ac b/configure.ac
> index 4d12715..f57cd45 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -64,12 +64,15 @@ AC_ARG_ENABLE(nfsv4,
> enable_nfsv4=yes)
> if test "$enable_nfsv4" = yes; then
> AC_DEFINE(NFS4_SUPPORTED, 1, [Define this if you want NFSv4 support compiled in])
> + BLKMAPD=blkmapd
> IDMAPD=idmapd
> SPNFSD=spnfsd
> else
> enable_nfsv4=
> + BLKMAPD=
> IDMAPD=
> fi
> + AC_SUBST(BLKMAPD)
> AC_SUBST(IDMAPD)
> AC_SUBST(enable_nfsv4)
> AM_CONDITIONAL(CONFIG_NFSV4, [test "$enable_nfsv4" = "yes"])
> @@ -429,6 +432,7 @@ AC_CONFIG_FILES([
> tools/mountstats/Makefile
> tools/nfs-iostat/Makefile
> utils/Makefile
> + utils/blkmapd/Makefile
> utils/exportfs/Makefile
> utils/gssd/Makefile
> utils/idmapd/Makefile
> diff --git a/utils/Makefile.am b/utils/Makefile.am
> index c777d21..c33835a 100644
> --- a/utils/Makefile.am
> +++ b/utils/Makefile.am
> @@ -10,6 +10,10 @@ if CONFIG_NFSV4
> OPTDIRS += spnfsd
> endif
>
> +if CONFIG_NFSV4
> +OPTDIRS += blkmapd
> +endif
> +
> if CONFIG_GSS
> OPTDIRS += gssd
> endif
> diff --git a/utils/blkmapd/Makefile.am b/utils/blkmapd/Makefile.am
> new file mode 100644
> index 0000000..81cc420
> --- /dev/null
> +++ b/utils/blkmapd/Makefile.am
> @@ -0,0 +1,63 @@
> +## Process this file with automake to produce Makefile.in
> +
> +#man8_MANS = blkmapd.man
> +
> +AM_CFLAGS += -D_LARGEFILE64_SOURCE
> +KPREFIX = @kprefix@
> +sbin_PROGRAMS = blkmapd
> +
> +blkmapd_SOURCES = \
> + atomicio.c \
> + cfg.c \
> + device-discovery.c \
> + device-inq.c \
> + device-process.c \
> + dm-device.c \
> + \
> + cfg.h \
> + device-discovery.h
> +
> +blkmapd_LDADD = -ldevmapper ../../support/nfs/libnfs.a
> +
> +MAINTAINERCLEANFILES = Makefile.in
> +
> +#######################################################################
> +# The following allows the current practice of having
> +# daemons renamed during the install to include RPCPREFIX
> +# and the KPREFIX
> +# This could all be done much easier with program_transform_name
> +# ( program_transform_name = s/^/$(RPCPREFIX)$(KPREFIX)/ )
> +# but that also renames the man pages, which the current
> +# practice does not do.
> +install-exec-hook:
> + (cd $(DESTDIR)$(sbindir) && \
> + for p in $(sbin_PROGRAMS); do \
> + mv -f $$p$(EXEEXT) $(RPCPREFIX)$(KPREFIX)$$p$(EXEEXT) ;\
> + done)
> +uninstall-hook:
> + (cd $(DESTDIR)$(sbindir) && \
> + for p in $(sbin_PROGRAMS); do \
> + rm -f $(RPCPREFIX)$(KPREFIX)$$p$(EXEEXT) ;\
> + done)
> +
> +
> +# XXX This makes some assumptions about what automake does.
> +# XXX But there is no install-man-hook or install-man-local.
> +install-man: install-man8 install-man-links
> +uninstall-man: uninstall-man8 uninstall-man-links
> +
> +install-man-links:
> + (cd $(DESTDIR)$(man8dir) && \
> + for m in $(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS); do \
> + inst=`echo $$m | sed -e 's/man$$/8/'`; \
> + rm -f $(RPCPREFIX)$$inst ; \
> + $(LN_S) $$inst $(RPCPREFIX)$$inst ; \
> + done)
> +
> +uninstall-man-links:
> + (cd $(DESTDIR)$(man8dir) && \
> + for m in $(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS); do \
> + inst=`echo $$m | sed -e 's/man$$/8/'`; \
> + rm -f $(RPCPREFIX)$$inst ; \
> + done)
> +
> diff --git a/utils/blkmapd/atomicio.c b/utils/blkmapd/atomicio.c
> new file mode 100644
> index 0000000..8db626e
> --- /dev/null
> +++ b/utils/blkmapd/atomicio.c
> @@ -0,0 +1,54 @@
> +/*
> + * Copyright (c) 2002 Marius Aamodt Eriksen <marius@xxxxxxxxxx>
> + * Copyright (c) 1995,1999 Theo de Raadt. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <sys/types.h>
> +#include <unistd.h>
> +#include <errno.h>
> +
> +/*
> + * ensure all of data on socket comes through. f==read || f==write
> + */
> +ssize_t atomicio(ssize_t(*f) (int, void *, size_t), int fd, void *_s, size_t n)
> +{
> + char *s = _s;
> + ssize_t res, pos = 0;
> +
> + while (n > pos) {
> + res = (f) (fd, s + pos, n - pos);
> + switch (res) {
> + case -1:
> + if (errno == EINTR || errno == EAGAIN)
> + continue;
> + case 0:
> + if (pos != 0)
> + return pos;
> + return res;
> + default:
> + pos += res;
> + }
> + }
> + return pos;
> +}
> diff --git a/utils/blkmapd/cfg.c b/utils/blkmapd/cfg.c
> new file mode 100644
> index 0000000..dab9d0f
> --- /dev/null
> +++ b/utils/blkmapd/cfg.c
> @@ -0,0 +1,248 @@
> +/*
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <sys/param.h>
> +#include <sys/stat.h>
> +#include <linux/errno.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <unistd.h>
> +#include <string.h>
> +#include <fcntl.h>
> +#include <ctype.h>
> +
> +#include "device-discovery.h"
> +#include "cfg.h"
> +
> +char *conf_path = "/etc/blkmapd.conf";
> +
> +struct scan_root_list *scan_root_list_head;
> +
> +void bl_release_list(void)
> +{
> + struct scan_root_list *root = scan_root_list_head;
> + struct scan_device_list *disk;
> +
> + while (root) {
> + disk = root->disk;
> + while (disk) {
> + root->disk = disk->next;
> + free(disk->name);
> + free(disk);
> + disk = root->disk;
> + }
> + scan_root_list_head = root->next;
> + free(root->name);
> + free(root);
> + root = scan_root_list_head;
> + }
> +}
> +
> +struct scan_root_list *bl_alloc_root_list(char *name, int all_disk)
> +{
> + struct scan_root_list *root;
> +
> + root = malloc(sizeof(struct scan_root_list));
> + if (!root)
> + goto nomem;
> +
> + root->name = strdup(name);
> + if (!root->name)
> + goto nomem;
> + root->next = scan_root_list_head;
> + root->all_disk = all_disk;
> + scan_root_list_head = root;
> + return root;
> +
> + nomem:
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + if (root)
> + free(root);
> + return NULL;
> +}
> +
> +struct scan_device_list *bl_alloc_device_list(struct scan_root_list *root,
> + char *name)
> +{
> + struct scan_device_list *device;
> +
> + device = malloc(sizeof(struct scan_device_list));
> + if (!device)
> + goto nomem;
> +
> + device->name = strdup(name);
> + if (!device->name)
> + goto nomem;
> + device->next = root->disk;
> + root->disk = device;
> + return device;
> +
> + nomem:
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + if (device)
> + free(device);
> + return NULL;
> +}
> +
> +struct scan_device_list *bl_insert_device_list(struct scan_root_list *root,
> + char *name)
> +{
> + struct scan_device_list *device = root->disk;
> +
> + /* Check whether this device has been inserted */
> + while (device) {
> + if (device->name && !strcmp(device->name, name))
> + return device;
> + device = device->next;
> + }
> +
> + return bl_alloc_device_list(root, name);
> +}
> +
> +struct scan_root_list *bl_insert_root_list(char *name, int all_disk)
> +{
> + struct scan_root_list *root = scan_root_list_head;
> +
> + /* Check whether this root has been inserted */
> + while (root) {
> + if (root->name && !strcmp(root->name, name))
> + return root;
> + root = root->next;
> + }
> +
> + return bl_alloc_root_list(name, all_disk);
> +}
> +
> +int bl_parse_line(char *line, struct scan_root_list **bl_root)
> +{
> + char *root, *device, *end;
> +
> + root = strdup(line);
> + end = root + strlen(line);
> +
> + /* Skip comments */
> + if (*root == '#')
> + return 0;
> +
> + /* Trim leading space */
> + while (*root != '\0' && isspace(*root))
> + root++;
> + if (*root == '\0')
> + return 0;
> +
> + /* Trim trailing space and set "end" to last char */
> + while ((isspace(*end) || (*end == '\0')) && (end > root))
> + end--;
> +
> + /* For lines ending with '/' or '/','*': add as a dir root */
> + if ((*end == '/') ||
> + ((*end == '*') && (end - root >= 1) && (*(end - 1) == '/'))) {
> + if (*end == '*')
> + end--;
> + if (*end == '/')
> + end--;
> + *(end + 1) = '\0';
> + *bl_root = bl_insert_root_list(root, 1);
> + return 0;
> + }
> +
> + /* Other lines: add as a device */
> + device = end;
> + while ((*device != '/') && (device > root))
> + device--;
> + if (device == root) {
> + BL_LOG_ERR("%s: invalid config line\n", __func__);
> + return -1;
> + }
> + *device = '\0';
> + *bl_root = bl_insert_root_list(root, 0);
> + if (*bl_root == NULL)
> + return -ENOMEM;
> + if (*end == '*')
> + end--;
> + *(end + 1) = '\0';
> + if (bl_insert_device_list(*bl_root, device + 1) == NULL)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> +int bl_set_default_conf(void)
> +{
> + struct scan_root_list *root = NULL;
> + int rv;
> +
> + bl_release_list();
> + rv = bl_parse_line("/dev/sd*", &root);
> + if (rv < 0)
> + return rv;
> + rv = bl_parse_line("/dev/mapper/", &root);
> + return rv;
> +}
> +
> +int bl_parse_conf(char *buf)
> +{
> + char *tmp = buf, *line = buf, *end = buf + strlen(buf);
> + struct scan_root_list *bl_root = NULL;
> + int rv;
> +
> + while (tmp < end) {
> + if (*tmp == '\n') {
> + *tmp = '\0';
> + rv = bl_parse_line(line, &bl_root);
> + if (rv < 0)
> + return rv;
> + line = tmp + 1;
> + }
> + tmp++;
> + }
> +
> + return 0;
> +}
> +
> +int bl_cfg_init(void)
> +{
> + struct scan_root_list *root = NULL;
> + FILE *f = NULL;
> + char buf[PATH_MAX];
> + int rv = 0;
> +
> + f = fopen(conf_path, "r");
> + if (f == NULL)
> + rv = bl_set_default_conf();
> + else {
> + while (fgets(buf, sizeof buf, f) != NULL) {
> + rv = bl_parse_line(buf, &root);
> + if (rv < 0)
> + break;
> + }
> + }
> + if (!scan_root_list_head)
> + rv = -EINVAL;
> +
> + if (f)
> + fclose(f);
> + return rv;
> +}
> diff --git a/utils/blkmapd/cfg.h b/utils/blkmapd/cfg.h
> new file mode 100644
> index 0000000..b9bf930
> --- /dev/null
> +++ b/utils/blkmapd/cfg.h
> @@ -0,0 +1,47 @@
> +/*
> + * bl-cfg.h
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#ifndef BL_CFG_H
> +#define BL_CFG_H
> +
> +extern char *conf_path;
> +extern struct scan_root_list *scan_root_list_head;
> +
> +struct scan_device_list {
> + struct scan_device_list *next;
> + char *name;
> +};
> +
> +struct scan_root_list {
> + struct scan_root_list *next;
> + unsigned int all_disk;
> + char *name;
> + struct scan_device_list *disk;
> +};
> +
> +int bl_cfg_init(void);
> +
> +#endif
> diff --git a/utils/blkmapd/device-discovery.c b/utils/blkmapd/device-discovery.c
> new file mode 100644
> index 0000000..f42ddc8
> --- /dev/null
> +++ b/utils/blkmapd/device-discovery.c
> @@ -0,0 +1,502 @@
> +/*
> + * device-discovery.c: main function, discovering device and processing
> + * pipe request from kernel.
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <dirent.h>
> +#include <ctype.h>
> +#include <linux/kdev_t.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/ioctl.h>
> +#include <sys/mount.h>
> +#include <sys/select.h>
> +#include <fcntl.h>
> +#include <unistd.h>
> +#include <libgen.h>
> +#include <errno.h>
> +#include <scsi/scsi.h>
> +#include <scsi/scsi_ioctl.h>
> +#include <scsi/sg.h>
> +#include "device-discovery.h"
> +#include "cfg.h"
> +
> +#define BL_PIPE_FILE "/var/lib/nfs/rpc_pipefs/bl_device_pipe"
> +#define PID_FILE "/var/run/blkmapd.pid"
> +
> +struct bl_disk *visible_disk_list;
> +
> +struct bl_disk_path *bl_get_path(const char *filepath,
> + struct bl_disk_path *paths)
> +{
> + struct bl_disk_path *tmp = paths;
> + while (tmp) {
> + if (!strcmp(tmp->full_path, filepath))
> + break;
> + tmp = tmp->next;
> + }
> + return tmp;
> +}
> +
> +/* Check whether valid_path is a substring(partition) of path */
> +int bl_is_partition(struct bl_disk_path *valid_path, struct bl_disk_path *path)
> +{
> + if (!strncmp(valid_path->full_path, path->full_path,
> + strlen(valid_path->full_path)))
> + return 1;
> +
> + return 0;
> +}
> +
> +/*
> + * For multipath devices, devices state could be PASSIVE/ACTIVE/PSEUDO,
> + * where PSEUDO > ACTIVE > PASSIVE. Device with highest state is used to
> + * create pseudo device. So if state is higher, the device path needs to
> + * be updated.
> + * If device-mapper multipath support is a must, pseudo devices should
> + * exist for each multipath device. If not, active device path will be
> + * chosen for device creation.
> + * Treat partition as invalid path.
> + */
> +int bl_update_path(struct bl_disk_path *path, enum bl_path_state_e state,
> + struct bl_disk *disk)
> +{
> + struct bl_disk_path *valid_path = disk->valid_path;
> +
> + if (valid_path) {
> + if (valid_path->state >= state) {
> + if (bl_is_partition(valid_path, path))
> + return 0;
> + }
> + }
> + return 1;
> +}
> +
> +void bl_release_disk(void)
> +{
> + struct bl_disk *disk;
> + struct bl_disk_path *path = NULL;
> +
> + while (visible_disk_list) {
> + disk = visible_disk_list;
> + path = disk->paths;
> + while (path) {
> + disk->paths = path->next;
> + free(path->full_path);
> + free(path);
> + path = disk->paths;
> + }
> + if (disk->serial)
> + free(disk->serial);
> + visible_disk_list = disk->next;
> + free(disk);
> + }
> +}
> +
> +void bl_add_disk(char *filepath)
> +{
> + struct bl_disk *disk = NULL;
> + int fd = 0;
> + struct stat sb;
> + off_t size = 0;
> + struct bl_serial *serial = NULL;
> + enum bl_path_state_e ap_state = BL_PATH_STATE_PASSIVE;
> + struct bl_disk_path *diskpath = NULL, *path = NULL;
> + dev_t dev;
> +
> + BL_LOG_ERR("%s: %s\n", __func__, filepath);
> +
> + fd = open(filepath, O_RDONLY | O_LARGEFILE);
> + if (fd < 0)
> + return;
> +
> + if (fstat(fd, &sb)) {
> + close(fd);
> + return;
> + }
> +
> + if (!sb.st_size)
> + ioctl(fd, BLKGETSIZE, &size);
> + else
> + size = sb.st_size;
> +
> + if (!size) {
> + close(fd);
> + return;
> + }
> +
> + dev = sb.st_rdev;
> + serial = bldev_read_serial(fd, filepath);
> +
> + for (disk = visible_disk_list; disk != NULL; disk = disk->next) {
> + /* Already scanned or a partition?
> + * XXX: if released each time, maybe not need to compare
> + */
> + if ((serial->len == disk->serial->len) &&
> + !memcmp(serial->data, disk->serial->data, serial->len)) {
> + diskpath = bl_get_path(filepath, disk->paths);
> + break;
> + }
> + }
> +
> + if (disk && diskpath) {
> + close(fd);
> + return;
> + }
> +
> + bldev_read_ap_state(fd, &ap_state);
> + close(fd);
> +
> + /*
> + * Not sure how to identify a pseudo device created by
> + * device-mapper, so leave /dev/mapper for now.
> + */
> + if (strncmp(filepath, "/dev/mapper", 11) == 0)
> + ap_state = BL_PATH_STATE_PSEUDO;
> +
> + /* add path */
> + path = malloc(sizeof(struct bl_disk_path));
> + if (!path) {
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + goto out_err;
> + }
> + path->next = NULL;
> + path->state = ap_state;
> + path->full_path = strdup(filepath);
> + if (!path->full_path)
> + goto out_err;
> +
> + if (!disk) { /* add disk */
> + disk = malloc(sizeof(struct bl_disk));
> + if (!disk) {
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + goto out_err;
> + }
> + disk->next = visible_disk_list;
> + disk->dev = dev;
> + disk->size = size;
> + disk->serial = serial;
> + disk->valid_path = path;
> + disk->paths = path;
> + visible_disk_list = disk;
> + } else {
> + path->next = disk->paths;
> + disk->paths = path;
> + /* check whether we need to update disk info */
> + if (bl_update_path(path, path->state, disk)) {
> + disk->dev = dev;
> + disk->size = size;
> + disk->valid_path = path;
> + }
> + }
> + return;
> +
> + out_err:
> + if (path) {
> + if (path->full_path)
> + free(path->full_path);
> + free(path);
> + }
> + return;
> +}
> +
> +void bl_devicescan(const char *filename, struct scan_root_list *root)
> +{
> + /* scan all disks */
> + char filepath[PATH_MAX];
> + struct scan_device_list *device;
> +
> + if (!strcmp(filename, ".") || !strcmp(filename, ".."))
> + return;
> +
> + memset(filepath, 0, sizeof(filepath));
> + if (strlen(filename) < (PATH_MAX - strlen(root->name) - 2))
> + sprintf(filepath, "%s/%s", root->name, filename);
> + else {
> + BL_LOG_ERR("%s: name too long\n", __func__);
> + return;
> + }
> + if (root->all_disk)
> + goto valid;
> +
> + device = root->disk;
> + while (device) {
> + /* If device->name is a subset of filename, this disk should be
> + * valid for scanning.
> + * For example, device->name is "sd", filename is "sda".
> + */
> + if (device->name
> + && !memcmp(filename, device->name, strlen(device->name)))
> + goto valid;
> + device = device->next;
> + }
> +
> + return;
> +
> + valid:
> + /*
> + * sg device is not a real device, but a device created according
> + * to each scsi device. It won't be used for pseudo device creation.
> + * I moved it here, so that sg devices will not be scanned.
> + */
> + if (!strncmp(filepath, "/dev/sg", 7))
> + return;
> + bl_add_disk(filepath);
> + return;
> +}
> +
> +int bl_discover_devices(void)
> +{
> + DIR *dir;
> + struct dirent *dp;
> + struct scan_root_list *root = scan_root_list_head;
> +
> + /* release previous list */
> + bl_release_disk();
> +
> + /* scan all disks */
> + while (root) {
> + dir = opendir(root->name);
> + if (dir == NULL) {
> + root = root->next;
> + continue;
> + }
> +
> + while ((dp = readdir(dir)) != NULL)
> + bl_devicescan(dp->d_name, root);
> +
> + root = root->next;
> + closedir(dir);
> + }
> +
> + return 0;
> +}
> +
> +/* process kernel request
> + * return 0: request processed, and no more request waiting;
> + * return 1: request processed, and more requests waiting;
> + * return < 0: error
> + */
> +int bl_disk_inquiry_process(int fd)
> +{
> + int ret = 0;
> + struct pipefs_hdr *head = NULL, *tmp;
> + char *buf = NULL;
> + uint32_t major, minor;
> + uint16_t buflen;
> + unsigned int len = 0;
> +
> + head = calloc(1, sizeof(struct pipefs_hdr));
> + if (!head) {
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + return -ENOMEM;
> + }
> +
> + /* read request */
> + if (atomicio(read, fd, head, sizeof(*head)) != sizeof(*head)) {
> + /* Note that an error in this or the next read is pretty
> + * catastrophic, as there is no good way to resync into
> + * the pipe's stream.
> + */
> + BL_LOG_ERR("Read pipefs head error!\n");
> + ret = -EIO;
> + goto out;
> + }
> +
> + buflen = head->totallen - sizeof(*head);
> + buf = malloc(buflen);
> + if (!buf) {
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + if (atomicio(read, fd, buf, buflen) != buflen) {
> + BL_LOG_ERR("Read pipefs content error!\n");
> + ret = -EIO;
> + goto out;
> + }
> +
> + head->status = BL_DEVICE_REQUEST_PROC;
> + switch (head->type) {
> + case BL_DEVICE_MOUNT:
> + if (!process_deviceinfo(buf, buflen, &major, &minor)) {
> + head->status = BL_DEVICE_REQUEST_ERR;
> + goto out;
> + }
> + tmp = realloc(head, sizeof(major) + sizeof(minor) +
> + sizeof(struct pipefs_hdr));
> + if (!tmp) {
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + ret = -ENOMEM;
> + goto out;
> + }
> + head = tmp;
> + memcpy((void *)head + sizeof(struct pipefs_hdr),
> + &major, sizeof(major));
> + memcpy((void *)head + sizeof(struct pipefs_hdr) + sizeof(major),
> + &minor, sizeof(minor));
> + len = sizeof(major) + sizeof(minor);
> + break;
> + case BL_DEVICE_UMOUNT:
> + if (!dm_device_remove_all((uint64_t *) buf))
> + head->status = BL_DEVICE_REQUEST_ERR;
> + bl_discover_devices();
> + break;
> + default:
> + head->status = BL_DEVICE_REQUEST_ERR;
> + }
> +
> + head->totallen = sizeof(struct pipefs_hdr) + len;
> + /* write to pipefs */
> + if (atomicio((void *)write, fd, head, head->totallen)
> + != head->totallen) {
> + BL_LOG_ERR("Write pipefs error!\n");
> + ret = -EIO;
> + }
> +
> + out:
> + if (buf)
> + free(buf);
> + if (head)
> + free(head);
> + return ret;
> +}
> +
> +/* TODO: set bl_process_stop to 1 in command */
> +unsigned int bl_process_stop;
> +
> +int bl_run_disk_inquiry_process(int fd)
> +{
> + fd_set rset;
> + struct timeval tv;
> + int ret;
> +
> + bl_process_stop = 0;
> +
> + for (;;) {
> + if (bl_process_stop)
> + return 1;
> + FD_ZERO(&rset);
> + FD_SET(fd, &rset);
> + ret = 0;
> + tv.tv_sec = BL_DEVICE_DISCOVERY_INTERVAL;
> + switch (select(fd + 1, &rset, NULL, NULL, &tv)) {
> + case -1:
> + if (errno == EINTR)
> + continue;
> + else {
> + ret = -errno;
> + goto out;
> + }
> + case 0:
> + goto out;
> + default:
> + if (FD_ISSET(fd, &rset))
> + ret = bl_disk_inquiry_process(fd);
> + }
> + }
> + out:
> + return ret;
> +}
> +
> +/* Daemon */
> +int main(int argc, char **argv)
> +{
> + int fd, opt, fg = 0, ret = 1;
> + struct stat statbuf;
> + char pidbuf[64];
> +
> + while ((opt = getopt(argc, argv, "c:f")) != -1) {
> + switch (opt) {
> + case 'c':
> + conf_path = optarg;
> + break;
> + case 'f':
> + fg = 1;
> + break;
> + }
> + }
> +
> + if (!stat(PID_FILE, &statbuf)) {
> + fprintf(stderr, "Pid file already existed\n");
> + return -1;
> + }
> +
> + if (!fg && daemon(0, 0) != 0) {
> + fprintf(stderr, "Daemonize failed\n");
> + return -1;
> + }
> +
> + openlog("blkmapd", LOG_PID, 0);
> + fd = open(PID_FILE, O_WRONLY | O_CREAT, 0644);
> + if (fd < 0) {
> + BL_LOG_ERR("Create pid file failed\n");
> + return -1;
> + }
> +
> + if (lockf(fd, F_TLOCK, 0) < 0) {
> + BL_LOG_ERR("Lock pid file failed\n");
> + close(fd);
> + return -1;
> + }
> + ftruncate(fd, 0);
> + sprintf(pidbuf, "%d\n", getpid());
> + write(fd, pidbuf, strlen(pidbuf));
> +
> + /* open pipe file */
> + fd = open(BL_PIPE_FILE, O_RDWR);
> + if (fd < 0) {
> + BL_LOG_ERR("open pipe file error\n");
> + return -1;
> + }
> +
> + ret = bl_cfg_init();
> + if (ret < 0) {
> + if (ret == -ENOENT)
> + BL_LOG_WARNING("Config file not exist, use default\n");
> + else {
> + BL_LOG_ERR("Open/read Block pNFS config file error\n");
> + return -1;
> + }
> + }
> +
> + while (1) {
> + /* discover device when needed */
> + bl_discover_devices();
> +
> + ret = bl_run_disk_inquiry_process(fd);
> + if (ret < 0) {
> + /* what should we do with process error? */
> + BL_LOG_ERR("inquiry process return %d\n", ret);
> + }
> + }
> + close(fd);
> + return ret;
> +}
> diff --git a/utils/blkmapd/device-discovery.h b/utils/blkmapd/device-discovery.h
> new file mode 100644
> index 0000000..9f87ebe
> --- /dev/null
> +++ b/utils/blkmapd/device-discovery.h
> @@ -0,0 +1,162 @@
> +/*
> + * bl-device-discovery.h
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#ifndef BL_DEVICE_DISCOVERY_H
> +#define BL_DEVICE_DISCOVERY_H
> +
> +#define BL_DEVICE_DISCOVERY_INTERVAL 60
> +
> +#include <stdint.h>
> +#include <syslog.h>
> +
> +enum blk_vol_type {
> + BLOCK_VOLUME_SIMPLE = 0, /* maps to a single LU */
> + BLOCK_VOLUME_SLICE = 1, /* slice of another volume */
> + BLOCK_VOLUME_CONCAT = 2, /* concatenation of multiple volumes */
> + BLOCK_VOLUME_STRIPE = 3, /* striped across multiple volumes */
> + BLOCK_VOLUME_PSEUDO = 4,
> +};
> +
> +/* All disk offset/lengths are stored in 512-byte sectors */
> +struct bl_volume {
> + uint32_t bv_type;
> + off_t bv_size;
> + struct bl_volume **bv_vols;
> + int bv_vol_n;
> + union {
> + dev_t bv_dev; /*for BLOCK_VOLUME_SIMPLE(PSEUDO) */
> + off_t bv_stripe_unit; /*for BLOCK_VOLUME_STRIPE(CONCAT) */
> + off_t bv_offset; /*for BLOCK_VOLUME_SLICE */
> + } param;
> +};
> +
> +struct bl_sig_comp {
> + int64_t bs_offset; /* In bytes */
> + uint32_t bs_length; /* In bytes */
> + char *bs_string;
> +};
> +
> +/* Maximum number of signatures components in a simple volume */
> +# define BLOCK_MAX_SIG_COMP 16
> +
> +struct bl_sig {
> + int si_num_comps;
> + struct bl_sig_comp si_comps[BLOCK_MAX_SIG_COMP];
> +};
> +
> +/*
> + * Multipath support: ACTIVE or PSEUDO device is valid,
> + * PASSIVE is a standby for ACTIVE.
> + */
> +enum bl_path_state_e {
> + BL_PATH_STATE_PASSIVE = 1,
> + BL_PATH_STATE_ACTIVE = 2,
> + BL_PATH_STATE_PSEUDO = 3,
> +};
> +
> +struct bl_serial {
> + int len;
> + char *data;
> +};
> +
> +struct bl_disk_path {
> + struct bl_disk_path *next;
> + char *full_path;
> + enum bl_path_state_e state;
> +};
> +
> +struct bl_disk {
> + struct bl_disk *next;
> + struct bl_serial *serial;
> + dev_t dev;
> + off_t size;
> + struct bl_disk_path *valid_path;
> + struct bl_disk_path *paths;
> +};
> +
> +struct bl_dev_id {
> + unsigned char type;
> + unsigned char ids;
> + unsigned char reserve;
> + unsigned char len;
> + char data[0];
> +};
> +
> +struct pipefs_hdr {
> + uint32_t msgid;
> + uint8_t type;
> + uint8_t flags;
> + uint16_t totallen; /* length of entire message, including hdr */
> + uint32_t status;
> +};
> +
> +#define BL_DEVICE_UMOUNT 0x0 /* Umount--delete devices */
> +#define BL_DEVICE_MOUNT 0x1 /* Mount--create devices */
> +#define BL_DEVICE_REQUEST_INIT 0x0 /* Start request */
> +#define BL_DEVICE_REQUEST_PROC 0x1 /* User process succeeds */
> +#define BL_DEVICE_REQUEST_ERR 0x2 /* User process fails */
> +
> +uint32_t *blk_overflow(uint32_t * p, uint32_t * end, size_t nbytes);
> +
> +#define BLK_READBUF(p, e, nbytes) do { \
> + p = blk_overflow(p, e, nbytes); \
> + if (!p) {\
> + goto out_err;\
> + } \
> +} while (0)
> +
> +#define READ32(x) (x) = ntohl(*p++)
> +
> +#define READ64(x) do { \
> + (x) = (uint64_t)ntohl(*p++) << 32; \
> + (x) |= ntohl(*p++); \
> +} while (0)
> +
> +#define READ_SECTOR(x) do { \
> + READ64(tmp); \
> + if (tmp & 0x1ff) { \
> + goto out_err; \
> + } \
> + (x) = tmp >> 9; \
> +} while (0)
> +
> +extern struct bl_disk *visible_disk_list;
> +uint64_t dm_device_create(struct bl_volume *vols, int num_vols);
> +int dm_device_remove_all(uint64_t *dev);
> +uint64_t process_deviceinfo(const char *dev_addr_buf,
> + unsigned int dev_addr_len,
> + uint32_t *major, uint32_t *minor);
> +
> +extern ssize_t atomicio(ssize_t(*f) (int, void *, size_t),
> + int fd, void *_s, size_t n);
> +extern struct bl_serial *bldev_read_serial(int fd, const char *filename);
> +extern void bldev_read_ap_state(int fd, enum bl_path_state_e *ap_state_out);
> +extern int bl_discover_devices(void);
> +
> +#define BL_LOG_WARNING(fmt...) syslog(LOG_WARNING, fmt)
> +#define BL_LOG_ERR(fmt...) syslog(LOG_ERR, fmt)
> +#define BL_LOG_DEBUG(fmt...) syslog(LOG_DEBUG, fmt)
> +#endif
> diff --git a/utils/blkmapd/device-inq.c b/utils/blkmapd/device-inq.c
> new file mode 100644
> index 0000000..ff38fd6
> --- /dev/null
> +++ b/utils/blkmapd/device-inq.c
> @@ -0,0 +1,235 @@
> +/*
> + * device-inq.c: inquire SCSI device information.
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * This program refers to "SCSI Primary Commands - 3 (SPC-3)
> + * at http://www.t10.org and sg_inq.c in sg3_utils-1.26 for
> + * Linux OS SCSI subsystem, by D. Gilbert.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <dirent.h>
> +#include <ctype.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/ioctl.h>
> +#include <sys/mount.h>
> +#include <sys/select.h>
> +#include <fcntl.h>
> +#include <unistd.h>
> +#include <libgen.h>
> +#include <errno.h>
> +#include <scsi/scsi.h>
> +#include <scsi/scsi_ioctl.h>
> +#include <scsi/sg.h>
> +#include "device-discovery.h"
> +
> +#define DEF_ALLOC_LEN 255
> +#define MX_ALLOC_LEN (0xc000 + 0x80)
> +
> +struct bl_serial *bl_create_scsi_string(int len, const char *bytes)
> +{
> + struct bl_serial *s;
> + s = malloc(sizeof(*s) + len);
> + if (s) {
> + s->data = (char *)&s[1];
> + s->len = len;
> + memcpy(s->data, bytes, len);
> + }
> + return s;
> +}
> +
> +void bl_free_scsi_string(struct bl_serial *str)
> +{
> + if (str)
> + free(str);
> +}
> +
> +#define sg_io_ok(io_hdr) \
> + ((((io_hdr).status & 0x7e) == 0) && \
> + ((io_hdr).host_status == 0) && \
> + (((io_hdr).driver_status & 0x0f) == 0))
> +
> +static int sg_timeout = 1 * 1000;
> +
> +static int bldev_inquire_page(int fd, int page, char *buffer, int len)
> +{
> + unsigned char cmd[] = { INQUIRY, 0, 0, 0, 0, 0 };
> + unsigned char sense_b[28];
> + struct sg_io_hdr io_hdr;
> + if (page >= 0) {
> + cmd[1] = 1;
> + cmd[2] = page;
> + }
> + cmd[3] = (unsigned char)((len >> 8) & 0xff);
> + cmd[4] = (unsigned char)(len & 0xff);
> +
> + memset(&io_hdr, 0, sizeof(struct sg_io_hdr));
> + io_hdr.interface_id = 'S';
> + io_hdr.cmd_len = sizeof(cmd);
> + io_hdr.mx_sb_len = sizeof(sense_b);
> + io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
> + io_hdr.dxfer_len = len;
> + io_hdr.dxferp = buffer;
> + io_hdr.cmdp = cmd;
> + io_hdr.sbp = sense_b;
> + io_hdr.timeout = sg_timeout;
> + if (ioctl(fd, SG_IO, &io_hdr) < 0)
> + return -1;
> +
> + if (sg_io_ok(io_hdr))
> + return 0;
> + return -1;
> +}
> +
> +int bldev_inquire_pages(int fd, int page, char **buffer)
> +{
> + int status = 0;
> + char *tmp;
> + int len;
> +
> + *buffer = calloc(DEF_ALLOC_LEN, sizeof(char));
> + if (!*buffer) {
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + return -ENOMEM;
> + }
> +
> + status = bldev_inquire_page(fd, page, *buffer, DEF_ALLOC_LEN);
> + if (status)
> + goto out;
> +
> + status = -1;
> + if ((*(*buffer + 1) & 0xff) != page)
> + goto out;
> +
> + len = (*(*buffer + 2) << 8) + *(*buffer + 3) + 4;
> + if (len > MX_ALLOC_LEN) {
> + BL_LOG_ERR("SCSI response length too long: %d\n", len);
> + goto out;
> + }
> + if (len > DEF_ALLOC_LEN) {
> + tmp = realloc(*buffer, len);
> + if (!tmp) {
> + BL_LOG_ERR("%s: Out of memory!\n", __func__);
> + status = -ENOMEM;
> + goto out;
> + }
> + *buffer = tmp;
> + status = bldev_inquire_page(fd, page, *buffer, len);
> + if (status)
> + goto out;
> + }
> + status = 0;
> + out:
> + return status;
> +}
> +
> +/* For EMC multipath devices, use VPD page (0xc0) to get status.
> + * For other devices, return ACTIVE for now
> + */
> +void bldev_read_ap_state(int fd, enum bl_path_state_e *ap_state_out)
> +{
> + int status = 0;
> + char *buffer;
> +
> + *ap_state_out = BL_PATH_STATE_ACTIVE;
> +
> + status = bldev_inquire_pages(fd, 0xc0, &buffer);
> + if (status)
> + goto out;
> +
> + if (buffer[4] < 0x02)
> + *ap_state_out = BL_PATH_STATE_PASSIVE;
> + out:
> + if (buffer)
> + free(buffer);
> + return;
> +}
> +
> +struct bl_serial *bldev_read_serial(int fd, const char *filename)
> +{
> + struct bl_serial *serial_out = NULL;
> + int status = 0, pos, len;
> + char *buffer;
> + struct bl_dev_id *dev_root, *dev_id;
> + unsigned int current_id = 0;
> +
> + status = bldev_inquire_pages(fd, 0x83, &buffer);
> + if (status)
> + goto out;
> +
> + dev_root = (struct bl_dev_id *)buffer;
> +
> + pos = 0;
> + current_id = 0;
> + len = dev_root->len;
> + while (pos < (len - sizeof(struct bl_dev_id) + sizeof(unsigned char))) {
> + dev_id = (struct bl_dev_id *)&(dev_root->data[pos]);
> + if ((dev_id->ids & 0xf) < current_id)
> + continue;
> + switch (dev_id->ids & 0xf) {
> + /* We process SCSI ID with four ID cases: 0, 1, 2 and 3.
> + * When more than one ID is available, priority is
> + * 3>2>1>0.
> + */
> + case 2: /* EUI-64 based */
> + if ((dev_id->len != 8) && (dev_id->len != 12) &&
> + (dev_id->len != 16)) {
> + BL_LOG_ERR("EUI-64 only decodes 8, "
> + "12 and 16\n");
> + break;
> + }
> + case 3: /* NAA */
> + /* TODO: NAA validity judgement too complicated,
> + * so just ingore it here.
> + */
> + if ((dev_id->type & 0xf) != 1) {
> + BL_LOG_ERR("Binary code_set expected\n");
> + break;
> + }
> + case 0: /* vendor specific */
> + case 1: /* T10 vendor identification */
> + current_id = dev_id->ids & 0xf;
> + if (serial_out)
> + bl_free_scsi_string(serial_out);
> + serial_out = bl_create_scsi_string(dev_id->len,
> + dev_id->data);
> + break;
> + default:
> + break;
> + }
> + if (current_id == 3)
> + break;
> + pos += (dev_id->len + sizeof(struct bl_dev_id) -
> + sizeof(unsigned char));
> + }
> + out:
> + if (!serial_out)
> + serial_out = bl_create_scsi_string(strlen(filename), filename);
> + if (buffer)
> + free(buffer);
> + return serial_out;
> +}
> diff --git a/utils/blkmapd/device-process.c b/utils/blkmapd/device-process.c
> new file mode 100644
> index 0000000..9e91840
> --- /dev/null
> +++ b/utils/blkmapd/device-process.c
> @@ -0,0 +1,394 @@
> +/*
> + * device-process.c: detailed processing of device information sent
> + * from kernel.
> + *
> + * Copyright (c) 2006 The Regents of the University of Michigan.
> + * All rights reserved.
> + *
> + * Andy Adamson <andros@xxxxxxxxxxxxxx>
> + * Fred Isaman <iisaman@xxxxxxxxx>
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + *
> + * Used codes in linux/fs/nfs/blocklayout/blocklayoutdev.c.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <libdevmapper.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/user.h>
> +#include <fcntl.h>
> +#include <errno.h>
> +#include <arpa/inet.h>
> +#include <linux/kdev_t.h>
> +#include "device-discovery.h"
> +
> +uint32_t *blk_overflow(uint32_t * p, uint32_t * end, size_t nbytes)
> +{
> + uint32_t *q = p + ((nbytes + 3) >> 2);
> + if (q > end || q < p)
> + return NULL;
> + return p;
> +}
> +
> +static int decode_blk_signature(uint32_t **pp, uint32_t *end,
> + struct bl_sig *sig)
> +{
> + int i, tmp;
> + uint32_t *p = *pp;
> +
> + BLK_READBUF(p, end, 4);
> + READ32(sig->si_num_comps);
> + if (sig->si_num_comps == 0) {
> + BL_LOG_ERR("0 components in sig\n");
> + goto out_err;
> + }
> + if (sig->si_num_comps >= BLOCK_MAX_SIG_COMP) {
> + BL_LOG_ERR("number of sig comps %i >= BLOCK_MAX_SIG_COMP\n",
> + sig->si_num_comps);
> + goto out_err;
> + }
> + for (i = 0; i < sig->si_num_comps; i++) {
> + BLK_READBUF(p, end, 12);
> + READ64(sig->si_comps[i].bs_offset);
> + READ32(tmp);
> + sig->si_comps[i].bs_length = tmp;
> + BLK_READBUF(p, end, tmp);
> + /* Note we rely here on fact that sig is used immediately
> + * for mapping, then thrown away.
> + */
> + sig->si_comps[i].bs_string = (char *)p;
> + BL_LOG_ERR("%s: si_comps[%d]: bs_length %d, bs_string %s\n",
> + __func__, i, sig->si_comps[i].bs_length,
> + sig->si_comps[i].bs_string);
> + p += ((tmp + 3) >> 2);
> + }
> + *pp = p;
> + return 0;
> + out_err:
> + return -EIO;
> +}
> +
> +/* Read signature from device
> + * return 0: read successfully
> + * return -1: error
> + */
> +int
> +read_cmp_blk_sig(const char *dev_name, struct bl_sig_comp *comp,
> + int64_t bs_offset)
> +{
> + int fd, ret = -1;
> + char *sig = NULL;
> +
> + fd = open(dev_name, O_RDONLY | O_LARGEFILE);
> + if (fd < 0) {
> + BL_LOG_ERR("%s could not be opened for read\n", dev_name);
> + goto error;
> + }
> +
> + sig = (char *)malloc(comp->bs_length);
> + if (!sig) {
> + BL_LOG_ERR("%s: Out of memory\n", __func__);
> + goto error;
> + }
> +
> + if (lseek64(fd, bs_offset, SEEK_SET) == -1) {
> + BL_LOG_ERR("File %s lseek error\n", dev_name);
> + goto error;
> + }
> +
> + if (atomicio(read, fd, sig, comp->bs_length) != comp->bs_length) {
> + BL_LOG_ERR("File %s read error\n", dev_name);
> + goto error;
> + }
> +
> + BL_LOG_ERR
> + ("%s: %s sig: %s, bs_string: %s, bs_length: %d, bs_offset: %lld\n",
> + __func__, dev_name, sig, comp->bs_string, comp->bs_length,
> + (long long)bs_offset);
> + ret = memcmp(sig, comp->bs_string, comp->bs_length);
> +
> + error:
> + if (sig)
> + free(sig);
> + if (fd >= 0)
> + close(fd);
> + return ret;
> +}
> +
> +/*
> + * All signatures in sig must be found on disk for verification.
> + * Returns True if sig matches, False otherwise.
> + */
> +static int verify_sig(struct bl_disk *disk, struct bl_sig *sig)
> +{
> + struct bl_sig_comp *comp;
> + int i, ret;
> + int64_t bs_offset;
> +
> + for (i = 0; i < sig->si_num_comps; i++) {
> + comp = &sig->si_comps[i];
> + bs_offset = comp->bs_offset;
> + if (bs_offset < 0)
> + bs_offset += (((int64_t) disk->size) << 9);
> + BL_LOG_ERR("%s: bs_offset: %lld\n",
> + __func__, (long long) bs_offset);
> + ret = read_cmp_blk_sig(disk->valid_path->full_path,
> + comp, bs_offset);
> + if (ret)
> + return 0;
> + }
> + return 1;
> +}
> +
> +/*
> + * map_sig_to_device()
> + * Given a signature, walk the list of visible disks searching for
> + * a match. Returns True if mapping was done, False otherwise.
> + *
> + * While we're at it, fill in the vol->bv_size.
> + */
> +static int map_sig_to_device(struct bl_sig *sig, struct bl_volume *vol)
> +{
> + int mapped = 0;
> + struct bl_disk *disk = visible_disk_list;
> + char *filepath = 0;
> + struct bl_disk *lolDisk = disk;
> +
> + while (lolDisk) {
> + BL_LOG_ERR("%s: visible_disk_list: %s\n", __func__,
> + lolDisk->valid_path->full_path);
> + lolDisk = lolDisk->next;
> + }
> +
> + /* scan disk list to find out match device */
> + while (disk) {
> + /* FIXME: should we use better algorithm for disk scan? */
> + mapped = verify_sig(disk, sig);
> + if (mapped) {
> + vol->param.bv_dev = disk->dev;
> + filepath = disk->valid_path->full_path;
> + vol->bv_size = disk->size;
> + break;
> + }
> + disk = disk->next;
> + }
> + return mapped;
> +}
> +
> +/* We are given an array of XDR encoded array indices, each of which should
> + * refer to a previously decoded device. Translate into a list of pointers
> + * to the appropriate pnfs_blk_volume's.
> + */
> +static int set_vol_array(uint32_t **pp, uint32_t *end,
> + struct bl_volume *vols, int working)
> +{
> + int i, index;
> + uint32_t *p = *pp;
> + struct bl_volume **array = vols[working].bv_vols;
> + for (i = 0; i < vols[working].bv_vol_n; i++) {
> + BLK_READBUF(p, end, 4);
> + READ32(index);
> + if ((index < 0) || (index >= working)) {
> + BL_LOG_ERR("set_vol_array: Id %i out of range\n",
> + index);
> + goto out_err;
> + }
> + array[i] = &vols[index];
> + }
> + *pp = p;
> + return 0;
> + out_err:
> + return -EIO;
> +}
> +
> +static uint64_t sum_subvolume_sizes(struct bl_volume *vol)
> +{
> + int i;
> + uint64_t sum = 0;
> + for (i = 0; i < vol->bv_vol_n; i++)
> + sum += vol->bv_vols[i]->bv_size;
> + return sum;
> +}
> +
> +static int decode_blk_volume(uint32_t **pp, uint32_t *end,
> + struct bl_volume *vols, int i, int *array_cnt)
> +{
> + int status = 0, j;
> + struct bl_sig sig;
> + uint32_t *p = *pp;
> + struct bl_volume *vol = &vols[i];
> + uint64_t tmp, tmp_size;
> + div_t d;
> +
> + BLK_READBUF(p, end, 4);
> + READ32(vol->bv_type);
> + switch (vol->bv_type) {
> + case BLOCK_VOLUME_SIMPLE:
> + *array_cnt = 0;
> + status = decode_blk_signature(&p, end, &sig);
> + if (status)
> + return status;
> + status = map_sig_to_device(&sig, vol);
> + if (!status) {
> + BL_LOG_ERR("Could not find disk for device\n");
> + return -ENXIO;
> + }
> + status = 0;
> + break;
> + case BLOCK_VOLUME_SLICE:
> + BLK_READBUF(p, end, 16);
> + READ_SECTOR(vol->param.bv_offset);
> + READ_SECTOR(vol->bv_size);
> + *array_cnt = vol->bv_vol_n = 1;
> + status = set_vol_array(&p, end, vols, i);
> + break;
> + case BLOCK_VOLUME_STRIPE:
> + BLK_READBUF(p, end, 8);
> + READ_SECTOR(vol->param.bv_stripe_unit);
> + off_t chunksize = vol->param.bv_stripe_unit;
> + if ((chunksize == 0) ||
> + ((chunksize & (chunksize - 1)) != 0) ||
> + (chunksize < (PAGE_SIZE >> 9)))
> + return -EIO;
> + BLK_READBUF(p, end, 4);
> + READ32(vol->bv_vol_n);
> + if (!vol->bv_vol_n)
> + return -EIO;
> + *array_cnt = vol->bv_vol_n;
> + status = set_vol_array(&p, end, vols, i);
> + if (status)
> + return status;
> + for (j = 1; j < vol->bv_vol_n; j++) {
> + if (vol->bv_vols[j]->bv_size !=
> + vol->bv_vols[0]->bv_size) {
> + BL_LOG_ERR("varying subvol size\n");
> + return -EIO;
> + }
> + }
> + /* Make sure total size only includes addressable areas */
> + tmp_size = vol->bv_vols[0]->bv_size;
> + d = div(tmp_size, (uint32_t) vol->param.bv_stripe_unit);
> + tmp_size = d.quot;
> + vol->bv_size = tmp_size * vol->param.bv_stripe_unit;
> + break;
> + case BLOCK_VOLUME_CONCAT:
> + BLK_READBUF(p, end, 4);
> + READ32(vol->bv_vol_n);
> + if (!vol->bv_vol_n)
> + return -EIO;
> + *array_cnt = vol->bv_vol_n;
> + status = set_vol_array(&p, end, vols, i);
> + if (status)
> + return status;
> + vol->bv_size = sum_subvolume_sizes(vol);
> + break;
> + default:
> + BL_LOG_ERR("Unknown volume type %i\n", vol->bv_type);
> + out_err:
> + return -EIO;
> + }
> + *pp = p;
> + return status;
> +}
> +
> +uint64_t process_deviceinfo(const char *dev_addr_buf,
> + unsigned int dev_addr_len,
> + uint32_t *major, uint32_t *minor)
> +{
> + int num_vols, i, status, count;
> + uint32_t *p, *end;
> + struct bl_volume *vols = NULL, **arrays = NULL, **arrays_ptr = NULL;
> + uint64_t dev = 0;
> + int tried = 0;
> +
> + restart:
> + p = (uint32_t *) dev_addr_buf;
> + end = (uint32_t *) ((char *)p + dev_addr_len);
> + /* Decode block volume */
> + BLK_READBUF(p, end, 4);
> + READ32(num_vols);
> + if (num_vols <= 0) {
> + BL_LOG_WARNING("Error: number of vols: %d\n", num_vols);
> + goto out_err;
> + }
> +
> + vols = (struct bl_volume *)malloc(num_vols * sizeof(struct bl_volume));
> + if (!vols) {
> + BL_LOG_ERR("%s: Out of memory\n", __func__);
> + goto out_err;
> + }
> +
> + /* Each volume in vols array needs its own array. Save time by
> + * allocating them all in one large hunk. Because each volume
> + * array can only reference previous volumes, and because once
> + * a concat or stripe references a volume, it may never be
> + * referenced again, the volume arrays are guaranteed to fit
> + * in the suprisingly small space allocated.
> + */
> + arrays =
> + (struct bl_volume **)malloc(num_vols * 2 *
> + sizeof(struct bl_volume *));
> + if (!arrays) {
> + BL_LOG_ERR("%s: Out of memory\n", __func__);
> + goto out_err;
> + }
> +
> + arrays_ptr = arrays;
> +
> + for (i = 0; i < num_vols; i++) {
> + vols[i].bv_vols = arrays_ptr;
> + status = decode_blk_volume(&p, end, vols, i, &count);
> + if (status == -ENXIO && (tried <= 5)) {
> + sleep(1);
> + BL_LOG_DEBUG("%s: discover again!\n", __func__);
> + bl_discover_devices();
> + tried++;
> + free(vols);
> + free(arrays);
> + goto restart;
> + }
> + if (status)
> + goto out_err;
> + arrays_ptr += count;
> + }
> +
> + if (p != end) {
> + BL_LOG_ERR("p is not equal to end!\n");
> + goto out_err;
> + }
> +
> + dev = dm_device_create(vols, num_vols);
> + *major = MAJOR(dev);
> + *minor = MINOR(dev);
> + out_err:
> + if (vols)
> + free(vols);
> + if (arrays)
> + free(arrays);
> + return dev;
> +}
> diff --git a/utils/blkmapd/dm-device.c b/utils/blkmapd/dm-device.c
> new file mode 100644
> index 0000000..8162706
> --- /dev/null
> +++ b/utils/blkmapd/dm-device.c
> @@ -0,0 +1,509 @@
> +/*
> + * dm-device.c: create or remove device via device mapper API.
> + *
> + * Copyright (c) 2010 EMC Corporation, Haiying Tang <Tang_Haiying@xxxxxxx>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +#include <libdevmapper.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <fcntl.h>
> +#include <errno.h>
> +#include <linux/kdev_t.h>
> +#include "device-discovery.h"
> +
> +#define DM_DEV_NAME_LEN 256
> +
> +#ifndef DM_MAX_TYPE_NAME
> +#define DM_MAX_TYPE_NAME 16
> +#endif
> +
> +#define DM_PARAMS_LEN 512 /* XXX: is this enough for target? */
> +#define DM_DIR "/dev/mapper"
> +#define DM_DIR_LEN12
> +#define TYPE_HAS_DEV(type) ((type == BLOCK_VOLUME_SIMPLE) || \
> + (type == BLOCK_VOLUME_PSEUDO))
> +
> +struct bl_dm_table {
> + uint64_t offset;
> + uint64_t size;
> + char target_type[DM_MAX_TYPE_NAME];
> + char params[DM_PARAMS_LEN];
> + struct bl_dm_table *next;
> +};
> +
> +struct bl_dm_tree {
> + uint64_t dev;
> + struct dm_tree *tree;
> + struct bl_dm_tree *next;
> +};
> +
> +static inline struct bl_dm_table *bl_dm_table_alloc(void)
> +{
> + return (struct bl_dm_table *)calloc(1, sizeof(struct bl_dm_table));
> +}
> +
> +void bl_dm_table_free(struct bl_dm_table *bl_table_head)
> +{
> + struct bl_dm_table *p = bl_table_head;
> + while (bl_table_head) {
> + p = bl_table_head->next;
> + free(bl_table_head);
> + bl_table_head = p;
> + }
> +}
> +
> +void add_to_bl_dm_table(struct bl_dm_table **bl_table_head,
> + struct bl_dm_table *table)
> +{
> + struct bl_dm_table *pre;
> + if (!*bl_table_head) {
> + *bl_table_head = table;
> + return;
> + }
> + pre = *bl_table_head;
> + while (pre->next)
> + pre = pre->next;
> + pre->next = table;
> + return;
> +}
> +
> +struct bl_dm_tree *bl_tree_head;
> +
> +struct bl_dm_tree *find_bl_dm_tree(uint64_t dev)
> +{
> + struct bl_dm_tree *p = bl_tree_head;
> + while (p) {
> + if (p->dev == dev)
> + return p;
> + p = p->next;
> + }
> + return NULL;
> +}
> +
> +void del_from_bl_dm_tree(uint64_t dev)
> +{
> + struct bl_dm_tree *pre = bl_tree_head;
> + struct bl_dm_tree *p;
> +
> + p = pre;
> + while (p) {
> + if (p->dev == dev) {
> + pre->next = p->next;
> + if (p == bl_tree_head)
> + bl_tree_head = bl_tree_head->next;
> + free(p);
> + break;
> + }
> + pre = p;
> + p = pre->next;
> + }
> +}
> +
> +void add_to_bl_dm_tree(struct bl_dm_tree *tree)
> +{
> + struct bl_dm_tree *pre;
> + if (!bl_tree_head) {
> + bl_tree_head = tree;
> + return;
> + }
> + pre = bl_tree_head;
> + while (pre->next)
> + pre = pre->next;
> + pre->next = tree;
> + return;
> +}
> +
> +/* Create device via device mapper
> + * return 0 when creation failed
> + * return dev no for created device
> + */
> +uint64_t dm_single_device_create(const char *dev_name, struct bl_dm_table * p)
> +{
> + struct dm_task *dmt;
> + struct dm_info dminfo;
> + int ret = 0;
> +
> + dmt = dm_task_create(DM_DEVICE_CREATE);
> + if (!dmt) {
> + BL_LOG_ERR("Create dm_task for %s failed\n", dev_name);
> + return 0;
> + }
> + ret = dm_task_set_name(dmt, dev_name);
> + if (!ret)
> + goto err_out;
> +
> + while (p) {
> + ret = dm_task_add_target(dmt, p->offset, p->size,
> + p->target_type, p->params);
> + if (!ret)
> + goto err_out;
> + p = p->next;
> + }
> +
> + ret = dm_task_run(dmt) &&
> + dm_task_get_info(dmt, &dminfo) && dminfo.exists;
> +
> + if (!ret)
> + goto err_out;
> +
> + dm_task_update_nodes();
> +
> + err_out:
> + dm_task_destroy(dmt);
> +
> + if (!ret) {
> + BL_LOG_ERR("Create device %s failed\n", dev_name);
> + return 0;
> + }
> + return MKDEV(dminfo.major, dminfo.minor);
> +}
> +
> +int dm_device_remove_byname(const char *dev_name)
> +{
> + struct dm_task *dmt;
> + int ret = 0;
> +
> + dmt = dm_task_create(DM_DEVICE_REMOVE);
> + if (!dmt)
> + return -ENODEV;
> +
> + ret = dm_task_set_name(dmt, dev_name) && dm_task_run(dmt);
> +
> + dm_task_update_nodes();
> +
> + if (dmt)
> + dm_task_destroy(dmt);
> +
> + return ret;
> +}
> +
> +int dm_device_remove(uint64_t dev)
> +{
> + struct dm_task *dmt;
> + struct dm_names *dmnames;
> + char *names = NULL;
> + int ret = -1;
> +
> + /* Look for dev_name via dev, if dev_name could be transferred here,
> + we could jump to DM_DEVICE_REMOVE directly */
> + dmt = dm_task_create(DM_DEVICE_LIST);
> + if (!dmt) {
> + BL_LOG_ERR("dm_task creation failed\n");
> + return -ENODEV;
> + }
> +
> + ret = dm_task_run(dmt);
> + if (!ret) {
> + BL_LOG_ERR("dm_task_run failed\n");
> + goto error;
> + }
> +
> + dmnames = dm_task_get_names(dmt);
> + if (!dmnames || !dmnames->dev) {
> + BL_LOG_ERR("dm_task_get_names failed\n");
> + goto error;
> + }
> +
> + do {
> + if (dmnames->dev == dev) {
> + names = dmnames->name;
> + break;
> + }
> + dmnames = (void *)dmnames + dmnames->next;
> + } while (dmnames);
> +
> + if (!names) {
> + BL_LOG_ERR("Could not find device\n");
> + goto error;
> + }
> +
> + dm_task_update_nodes();
> +
> + error:
> + dm_task_destroy(dmt);
> +
> + /* Start to remove device */
> + if (names)
> + ret = dm_device_remove_byname(names);
> + return ret;
> +}
> +
> +static unsigned long dev_count;
> +
> +void dm_devicelist_remove(unsigned long start, unsigned long end)
> +{
> + char dev_name[DM_DEV_NAME_LEN];
> + unsigned long count;
> +
> + if ((start >= dev_count) || (end <= 1) || (start >= end - 1))
> + return;
> +
> + for (count = end - 1; count > start; count--) {
> + sprintf(dev_name, "pnfs_vol_%lu", count - 1);
> + dm_device_remove_byname(dev_name);
> + }
> +
> + return;
> +}
> +
> +void bl_dm_remove_tree(uint64_t dev)
> +{
> + struct bl_dm_tree *p;
> +
> + p = find_bl_dm_tree(dev);
> + if (!p)
> + return;
> +
> + dm_tree_free(p->tree);
> + del_from_bl_dm_tree(dev);
> +}
> +
> +void bl_dm_create_tree(uint64_t dev)
> +{
> + struct dm_tree *tree;
> + struct bl_dm_tree *bl_tree;
> +
> + bl_tree = find_bl_dm_tree(dev);
> + if (bl_tree)
> + return; /* XXX: error? */
> +
> + tree = dm_tree_create();
> + if (!tree)
> + return;
> +
> + if (!dm_tree_add_dev(tree, MAJOR(dev), MINOR(dev))) {
> + dm_tree_free(tree);
> + return;
> + }
> +
> + bl_tree = malloc(sizeof(struct bl_dm_tree));
> + if (!bl_tree) {
> + dm_tree_free(tree);
> + return;
> + }
> +
> + bl_tree->dev = dev;
> + bl_tree->tree = tree;
> + bl_tree->next = NULL;
> + add_to_bl_dm_tree(bl_tree);
> +
> + return;
> +}
> +
> +uint64_t dm_device_nametodev(char *dev_name)
> +{
> + struct dm_task *dmt;
> + int ret = 0;
> + struct dm_info dminfo;
> +
> + dmt = dm_task_create(DM_DEVICE_INFO);
> + if (!dmt)
> + return -ENODEV;
> +
> + ret = dm_task_set_name(dmt, dev_name) &&
> + dm_task_run(dmt) && dm_task_get_info(dmt, &dminfo);
> +
> + if (dmt)
> + dm_task_destroy(dmt);
> +
> + if (!ret)
> + return 0;
> +
> + return MKDEV(dminfo.major, dminfo.minor);
> +}
> +
> +int dm_device_remove_all(uint64_t *dev)
> +{
> + struct bl_dm_tree *p;
> + struct dm_tree_node *node;
> + const char *uuid;
> + int ret = 0;
> + uint32_t major, minor;
> + uint64_t bl_dev;
> +
> + memcpy(&major, dev, sizeof(uint32_t));
> + memcpy(&minor, (void *)dev + sizeof(uint32_t), sizeof(uint32_t));
> + bl_dev = MKDEV(major, minor);
> + p = find_bl_dm_tree(bl_dev);
> + if (!p)
> + return ret;
> +
> + node = dm_tree_find_node(p->tree, MAJOR(bl_dev), MINOR(bl_dev));
> + if (!node)
> + return ret;
> +
> + uuid = dm_tree_node_get_uuid(node);
> + if (!uuid)
> + return ret;
> +
> + dm_device_remove(bl_dev);
> + ret = dm_tree_deactivate_children(node, uuid, strlen(uuid));
> + dm_task_update_nodes();
> + bl_dm_remove_tree(bl_dev);
> + return ret;
> +}
> +
> +/* TODO: check the value for DM_DEV_NAME_LEN, DM_TYPE_LEN, DM_PARAMS_LEN */
> +uint64_t dm_device_create(struct bl_volume *vols, int num_vols)
> +{
> + uint64_t size, dev = 0;
> + unsigned long count = dev_count;
> + int number = 0, i, pos;
> + struct bl_volume *node;
> + char *tmp;
> + struct bl_dm_table *table = NULL;
> + struct bl_dm_table *bl_table_head = NULL;
> + unsigned int len;
> + char *dev_name = NULL;
> + /* Create pseudo device here */
> + while (number < num_vols) {
> + node = &vols[number];
> + switch (node->bv_type) {
> + case BLOCK_VOLUME_SIMPLE:
> + /* Do not need to create device here */
> + dev = node->param.bv_dev;
> + goto continued;
> + case BLOCK_VOLUME_SLICE:
> + table = bl_dm_table_alloc();
> + if (!table)
> + goto out;
> + table->offset = 0;
> + table->size = node->bv_size;
> + strcpy(table->target_type, "linear");
> + if (!TYPE_HAS_DEV(node->bv_vols[0]->bv_type)) {
> + free(table);
> + goto out;
> + }
> + dev = node->bv_vols[0]->param.bv_dev;
> + tmp = table->params;
> + if (!dm_format_dev(tmp, DM_PARAMS_LEN,
> + MAJOR(dev), MINOR(dev))) {
> + free(table);
> + goto out;
> + }
> + tmp += strlen(tmp);
> + sprintf(tmp, " %lu", node->param.bv_offset);
> + add_to_bl_dm_table(&bl_table_head, table);
> + break;
> + case BLOCK_VOLUME_STRIPE:
> + table = bl_dm_table_alloc();
> + if (!table)
> + goto out;
> + table->offset = 0;
> + table->size = node->bv_size;
> + strcpy(table->target_type, "striped");
> + sprintf(table->params, "%d %lu %n", node->bv_vol_n,
> + node->param.bv_stripe_unit, &pos);
> + /* Repeatedly copy subdev to params */
> + tmp = table->params + pos;
> + len = DM_PARAMS_LEN - pos;
> + for (i = 0; i < node->bv_vol_n; i++) {
> + if (!TYPE_HAS_DEV(node->bv_vols[i]->bv_type)) {
> + free(table);
> + goto out;
> + }
> + dev = node->bv_vols[i]->param.bv_dev;
> + if (!dm_format_dev(tmp, len, MAJOR(dev),
> + MINOR(dev))) {
> + free(table);
> + goto out;
> + }
> + pos = strlen(tmp);
> + tmp += pos;
> + len -= pos;
> + sprintf(tmp, " %d ", 0);
> + tmp += 3;
> + len -= 3;
> + }
> + add_to_bl_dm_table(&bl_table_head, table);
> + break;
> + case BLOCK_VOLUME_CONCAT:
> + size = 0;
> + for (i = 0; i < node->bv_vol_n; i++) {
> + table = bl_dm_table_alloc();
> + if (!table)
> + goto out;
> + table->offset = size;
> + table->size = node->bv_vols[i]->bv_size;
> + if (!TYPE_HAS_DEV(node->bv_vols[i]->bv_type)) {
> + free(table);
> + goto out;
> + }
> + strcpy(table->target_type, "linear");
> + tmp = table->params;
> + dev = node->bv_vols[i]->param.bv_dev;
> + if (!dm_format_dev(tmp, DM_PARAMS_LEN,
> + MAJOR(dev), MINOR(dev))) {
> + free(table);
> + goto out;
> + }
> + tmp += strlen(tmp);
> + sprintf(tmp, " %d", 0);
> + size += table->size;
> + add_to_bl_dm_table(&bl_table_head, table);
> + }
> + break;
> + default:
> + /* Delete previous temporary devices */
> + dm_devicelist_remove(count, dev_count);
> + goto out;
> + } /* end of swtich */
> + /* Create dev_name here. Name of device is pnfs_vol_XXX */
> + if (dev_name)
> + free(dev_name);
> + dev_name = (char *)calloc(DM_DEV_NAME_LEN, sizeof(char));
> + if (!dev_name) {
> + BL_LOG_ERR("%s: Out of memory\n", __func__);
> + goto out;
> + }
> + sprintf(dev_name, "pnfs_vol_%lu", dev_count++);
> +
> + dev = dm_single_device_create(dev_name, bl_table_head);
> + if (!dev) {
> + /* Delete previous temporary devices */
> + dm_devicelist_remove(count, dev_count);
> + goto out;
> + }
> + node->param.bv_dev = dev;
> + /* TODO: extend use with PSEUDO later */
> + node->bv_type = BLOCK_VOLUME_PSEUDO;
> + continued:
> + number++;
> + if (bl_table_head)
> + bl_dm_table_free(bl_table_head);
> + bl_table_head = NULL;
> + }
> + out:
> + if (bl_table_head)
> + bl_dm_table_free(bl_table_head);
> + bl_table_head = NULL;
> + if (dev)
> + bl_dm_create_tree(dev);
> + if (dev_name)
> + free(dev_name);
> + return dev;
> +}
> diff --git a/utils/blkmapd/etc/blkmapd.conf b/utils/blkmapd/etc/blkmapd.conf
> new file mode 100644
> index 0000000..da70d94
> --- /dev/null
> +++ b/utils/blkmapd/etc/blkmapd.conf
> @@ -0,0 +1,10 @@
> +# This is an example config file
> +
> +# Look at all /dev/sd* devices
> +# /dev/sd or /dev/sd*
> +/dev/sd*
> +
> +# Look at all /dev/mapper/* devices
> +# /dev/mapper/* or
> +# /dev/mapper/
> +/dev/mapper/*
> diff --git a/utils/blkmapd/etc/initd/initd.redhat b/utils/blkmapd/etc/initd/initd.redhat
> new file mode 100644
> index 0000000..d6a77e8
> --- /dev/null
> +++ b/utils/blkmapd/etc/initd/initd.redhat
> @@ -0,0 +1,76 @@
> +#!/bin/sh
> +#
> +# description: Starts and stops the iSCSI initiator
> +#
> +# processname: blkmapd
> +# pidfile: /var/run/blkmapd.pid
> +# config: /etc/blkmapd.conf
> +
> +# Source function library.
> +if [ -f /etc/init.d/functions ] ; then
> + . /etc/init.d/functions
> +elif [ -f /etc/rc.d/init.d/functions ] ; then
> + . /etc/rc.d/init.d/functions
> +else
> + exit 0
> +fi
> +
> +PATH=/sbin:/bin:/usr/sbin:/usr/bin
> +
> +RETVAL=0
> +
> +start()
> +{
> + echo -n $"Starting pNFS block-layout device discovery service: "
> + modprobe -q blocklayoutdriver
> + daemon /usr/sbin/blkmapd
> + RETVAL=$?
> + if [ $RETVAL -eq 0 ]; then
> + touch /var/lock/subsys/blkmapd
> + fi
> + echo
> + return $RETVAL
> +}
> +
> +stop()
> +{
> + echo -n $"Stopping pNFS block-layout device discovery service: "
> + killproc blkmapd 2> /dev/null
> + rm -f /var/run/blkmapd.pid
> + RETVAL=$?
> + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/blkmapd
> + if [ $RETVAL -eq 0 ]; then
> + echo_success
> + else
> + echo_failure
> + fi
> + echo
> + return $RETVAL
> +}
> +
> +restart()
> +{
> + stop
> + start
> +}
> +
> +case "$1" in
> + start)
> + start
> + ;;
> + stop)
> + stop
> + ;;
> + restart)
> + stop
> + start
> + ;;
> + status)
> + status blkmapd
> + ;;
> + *)
> + echo $"Usage: $0 {start|stop|restart|status}"
> + exit 1
> +esac
> +
> +exit $RETVAL
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
