On Aug. 05, 2010, 3:20 +0300, "Chen, Helen Y" <hycsw@xxxxxxxxxx> wrote: > I add a 2nd DS and repeated the benchmark. It had seemed the test data had been placed on the MDS and not the DS'es? Any idea why? Any chance you forgot to modprobe nfslayoutdriver? BTW, this requirement just changed with a patch merge today that should automatically load the nfsv41 files layout driver on the client. Benny > > Thanks, > Helen > > The following are my notes on kernel, configuration set up, and results: > > I rebuilt Steve's f13 pnfs kernel source with: > # CONFIG_PNFSD_LOCAL_EXPORT is not set > > > Configuration set up: > Data Server: > /etc/fstab > tmpfs /export/spnfs tmpfs size=85% 0 0 > > /etc/exports > /export/spnfs *(rw,sync,fsid=0,insecure,no_subtree_check,pnfs,no_root_squash) > > > Meta Data Server: > /etc/fstab > wtb9-10g:/ /spnfs/192.168.96.109 nfs4 minorversion=1,intr,soft,rsize=32768,wsiz > e=32768 0 0 > wtb10-10g:/ /spnfs/192.168.96.110 nfs4 minorversion=1,intr,soft,rsize=32768,wsiz > e=32768 0 0 > wtb11-10g:/ /spnfs/192.168.96.11 nfs4 minorversion=1,intr,soft,rsize=32768,wsiz > e=32768 0 0 > > /etc/exports > /export *(rw,sync,pnfs,fsid=0,insecure,no_subtree_check,no_root_squash) > > /etc/spnfsd.conf > [General] > Verbosity = 1 > Stripe-size = 8192 > Dense-striping = 0 > Pipefs-Directory = /var/lib/nfs/rpc_pipefs > DS-Mount-Directory = /spnfs > > [DataServers] > NumDS = 2 > DS1_IP = 192.168.96.109 > DS1_PORT = 2049 > DS1_ROOT = / > DS1_ID = 1 > DS2_IP = 192.168.96.110 > DS2_PORT = 2049 > DS2_ROOT = / > DS2_ID = 2 > > > pNFS Client: > /etc/fstab > wtb8-10g:/ /mnt nfs4 minorversion=1,tcp,intr,soft,rsize=32768,wsize=32768,timeo=600 0 > > > The following is one of my benchmark result: > iozone -i 0 -s 1g -r 32k -f /mnt/1g -c -w > > > 1. on Client: > [root@wtb7 pnfs-tests]# ls -l /mnt > total 132100 > -rw-r----- 1 root root 1073741824 Aug 4 16:25 1g > > 2. on MDS > [root@wtb8 ~]# stat /export/1g > File: `/export/1g' > Size: 1073741824 Blocks: 264200 IO Block: 4096 regular file > Device: 805h/2053d Inode: 491522 Links: 1 > Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) > Access: 2010-08-04 16:24:48.000000000 -0700 > Modify: 2010-08-04 16:25:28.000000000 -0700 > Change: 2010-08-04 16:25:28.000000000 -0700 > > 2. on MDS > [root@wtb8 ~]# stat /export/1g > File: `/export/1g' > Size: 1073741824 Blocks: 264200 IO Block: 4096 regular file > Device: 805h/2053d Inode: 491522 Links: 1 > Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) > Access: 2010-08-04 16:24:48.000000000 -0700 > Modify: 2010-08-04 16:25:28.000000000 -0700 > Change: 2010-08-04 16:25:28.000000000 -0700 > > 3. op DS1: > [root@wtb9 ~]# stat /export/spnfs > File: `/export/spnfs' > Size: 60 Blocks: 0 IO Block: 4096 directory > Device: 14h/20d Inode: 8981 Links: 2 > Access: (1777/drwxrwxrwt) Uid: ( 0/ root) Gid: ( 0/ root) > Access: 2010-08-04 16:26:49.938720191 -0700 > Modify: 2010-08-04 16:58:31.959755618 -0700 > Change: 2010-08-04 16:58:31.959755618 -0700 > > 4. on DS2 > [root@wtb10 ~]# stat /export/spnfs/ > File: `/export/spnfs/' > Size: 60 Blocks: 0 IO Block: 4096 directory > Device: 13h/19d Inode: 8694 Links: 2 > Access: (1777/drwxrwxrwt) Uid: ( 0/ root) Gid: ( 0/ root) > Access: 2010-08-04 16:26:54.573669020 -0700 > Modify: 2010-08-04 16:58:18.525689302 -0700 > Change: 2010-08-04 16:58:18.525689302 -0700 > > > > ________________________________________ > From: Chen, Helen Y > Sent: Wednesday, August 04, 2010 3:59 PM > To: 'Benny Halevy'; 'steved@xxxxxxxxxx'; 'NFS list' > Subject: RE: pNFS file layout performance > > Steve and Benny, > > Thank you very much for your help! I have successfully set up a 3-node testbed and ran some benchmark since. Unfortunately, throughput results are very poor. > > I am running Steve's 2.6.33.5-112.2.2.pnfs.fc13.x86_64 kernel, and exported a 28GB ramfs from my DS to the MDS. I was able to achieve ~400 MB/s over NFS using iozone. I then proceed to run the same test from the pNFS client and got only 50 MB/s. After detecting that my test data had landed on both the MDS and DS, I assumed disk I/O on the MDS was the bottleneck. So I proceeded to rebuild the kernel with CONFIG_PNFSD_LOCAL_EXPORT disabled, but achieved only 6 MB/s afterward. Is this expected, or am I doing something wrong? Please let me know if I need to provide further information. > > Thanks, > Helen > > -----Original Message----- > From: Benny Halevy [mailto:bhalevy.lists@xxxxxxxxx] On Behalf Of Benny Halevy > Sent: Wednesday, May 26, 2010 5:36 AM > To: steved@xxxxxxxxxx; NFS list > Cc: Chen, Helen Y > Subject: Fwd: Re: [pnfs] problem building pnfs-nfs-utils under Fedora 13 > > Helen, please note that the pnfs@xxxxxxxxxxxxx mailing list was deprecated. > Forwarding to linux-nfs@xxxxxxxxxxxxxxxx > > From a quick glance I'm not sure what went wrong with your build, Steve should know better :-) > > Benny > > On May. 19, 2010, 20:32 +0300, "Chen, Helen Y" <hycsw@xxxxxxxxxx> wrote: > > > > > Has anyone successfully build pnfs enabled nfs utils under Fedora 13? > I am running the kernel from: > http://steved.fedorapeople.org/repos/pnfs/13/x86_64/ > > I installed libtirpc{,-devel}, tcp_wrappers{,-devel}, libevent{,-devel}, nfs-utils-lib{,-devel}, libgssglue{,-devel}, libblkid{,-devel}, and libcap{,-devel} > > per instructions from: > _http://wiki.linux-nfs.org/wiki/index.php/Configuring_pNFS/spnfsd#Kernel_and_nfs-utils_compilati__on_ > <http://wiki.linux-nfs.org/wiki/index.php/Configuring_pNFS/spnfsd#Kernel_and_nfs-utils_compilation> > > I used libnfsidmap{,-devel} bundled in: > Nfs-utils-lib-devel-1.1.5-1.fc13.X86_64.rpm > > Finally, I downloaded _nfs-utils-1.2.2-4.1.pnfs.src.rpm_ > <http://steved.fedorapeople.org/repos/pnfs/13/source/nfs-utils-1.2.2-4.1.pnfs.src.rpm> > from _http://steved.fedorapeople.org/repos/pnfs/13/source/_ > > I am having trouble building these utils. I failed to generate ‘configure’ when I ran autogen.sh: > > /c//leaning up ............. done > //lobotomize//: putting auxiliary files in `.'. > libtoolize: copying file `./ltmain.sh' > libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `aclocal'. > libtoolize: copying file `aclocal/libtool.m4' > libtoolize: copying file `aclocal/ltoptions.m4' > libtoolize: copying file `aclocal/ltsugar.m4' > libtoolize: copying file `aclocal/ltversion.m4' > libtoolize: copying file `aclocal/lt~obsolete.m4' > configure.ac:5: installing `./config.guess' > configure.ac:5: installing `./config.sub' > configure.ac:421: required file `tools/mountstats/Makefile.in' not found > configure.ac:421: required file `tools/nfs-iostat/Makefile.in' not found/ > > I deleted the two Makefile.in requirements from line 421 in configure.ac because there were only python scripts inside those directories. > > When I ran the ‘configure’ generated after the modification, it failed with the following output: > > /checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... > checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... no checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... no checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for clnt_tli_create in -ltirpc... yes checking /usr/include/tirpc/netconfig.h usability... yes checking /usr/include/tirpc/netconfig.h presence... yes checking for /usr/include/tirpc/netconfig.h... yes checking for prctl... yes checking for cap_g et_proc in -lcap... yes checking sys/capability.h usability... yes checking sys/capability.h presence... yes checking for sys/capability.h... yes checking for libwrap... / > > But libwrap is obviously installed based on the locate command: > #locate libwrap > /usr/lib/libwrap.so > /usr/lib/libwrap.so.0 > /usr/lib/libwrap.so.0.7.6 > /usr/lib64/libwrap.so > /usr/lib64/libwrap.so.0 > /usr/lib64/libwrap.so.0.7.6 > > I am new at this and would appreciate any help you can provide. > > Thanks, > Helen > > > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
