On Wed, 2010-07-07 at 18:04 -0400, Noveck_David@xxxxxxx wrote: > > Yes. I would agree that the client cannot rely on the updates being > made > > visible if it fails to send the LAYOUTCOMMIT. My point was simply that > a > > compliant server MUST also have a valid strategy for dealing with the > > case where the client doesn't send it. > > So you are saying the updates "MUST be made visible" through the > server's valid strategy. Is that right. > > And that the client cannot rely on that. Why not, if the server must > have a valid strategy. > > Is this just prudent "belt and suspenders" design or what? > > It seems to me that if one side here is MUST (and the spec needs to be > clearer about what might or might not constitute a valid strategy), then > the other side should be SHOULD. > > If both sides are "MUST", then if things don't work out then the client > and server can equally point to one another and say "It's his fault". > > Am I missing something here? See the example at the very bottom of this email. If the client dies after it has written data to the data servers, but before it can issue LAYOUTCOMMIT, then the server needs to have a strategy for dealing with that. Either it has to figure out that changes have been made, and to update the change attribute so that close-to-open cache consistency works, or it needs to ensure that those changes are not made visible. A "solution" where the file data changes, but the client can't detect it is not acceptable. Trond > -----Original Message----- > From: nfsv4-bounces@xxxxxxxx [mailto:nfsv4-bounces@xxxxxxxx] On Behalf > Of Trond Myklebust > Sent: Wednesday, July 07, 2010 5:01 PM > To: Muntz, Daniel > Cc: linux-nfs@xxxxxxxxxxxxxxx; garth@xxxxxxxxxxx; welch@xxxxxxxxxxx; > nfsv4@xxxxxxxx; andros@xxxxxxxxxx; bhalevy@xxxxxxxxxxx > Subject: Re: [nfsv4] 4.1 client - LAYOUTCOMMIT & close > > On Wed, 2010-07-07 at 16:39 -0400, Daniel.Muntz@xxxxxxx wrote: > > To bring this discussion full circle, since we agree that a compliant > > server can implement a scheme where written data does not become > visible > > until after a LAYOUTCOMMIT, do we also agree that LAYOUTCOMMIT is a > > "MUST" from a compliant client (independent of layout type)? > > Yes. I would agree that the client cannot rely on the updates being made > visible if it fails to send the LAYOUTCOMMIT. My point was simply that a > compliant server MUST also have a valid strategy for dealing with the > case where the client doesn't send it. > > Cheers > Trond > > > -Dan > > > > > -----Original Message----- > > > From: nfsv4-bounces@xxxxxxxx [mailto:nfsv4-bounces@xxxxxxxx] > > > On Behalf Of Trond Myklebust > > > Sent: Wednesday, July 07, 2010 7:04 AM > > > To: Benny Halevy > > > Cc: andros@xxxxxxxxxx; linux-nfs@xxxxxxxxxxxxxxx; Garth > > > Gibson; Brent Welch; NFSv4 > > > Subject: Re: [nfsv4] 4.1 client - LAYOUTCOMMIT & close > > > > > > On Wed, 2010-07-07 at 16:51 +0300, Benny Halevy wrote: > > > > On Jul. 07, 2010, 16:18 +0300, Trond Myklebust > > > <Trond.Myklebust@xxxxxxxxxx> wrote: > > > > > On Wed, 2010-07-07 at 09:06 -0400, Trond Myklebust wrote: > > > > >> On Wed, 2010-07-07 at 15:05 +0300, Benny Halevy wrote: > > > > >>> On Jul. 06, 2010, 23:40 +0300, Trond Myklebust > > > <trond.myklebust@xxxxxxxxxx> wrote: > > > > >>>> On Tue, 2010-07-06 at 15:20 -0400, Daniel.Muntz@xxxxxxx > wrote: > > > > >>>>> The COMMIT to the DS, ttbomk, commits data on the DS. > > > I see it as > > > > >>>>> orthogonal to updating the metadata on the MDS (but > > > perhaps I'm wrong). > > > > >>>>> As sjoshi@bluearc mentioned, the LAYOUTCOMMIT > > > provides a synchronization > > > > >>>>> point, so even if the non-clustered server does not > > > want to update > > > > >>>>> metadata on every DS I/O, the LAYOUTCOMMIT could also > > > be a trigger to > > > > >>>>> execute whatever synchronization mechanism the > > > implementer wishes to put > > > > >>>>> in the control protocol. > > > > >>>> > > > > >>>> As far as I'm aware, there are no exceptions in > > > RFC5661 that would allow > > > > >>>> pNFS servers to break the rule that any visible change > > > to the data must > > > > >>>> be atomically accompanied with a change attribute update. > > > > >>>> > > > > >>> > > > > >>> Trond, I'm not sure how this rule you mentioned is specified. > > > > >>> > > > > >>> See more in section 12.5.4 and 12.5.4.1. LAYOUTCOMMIT > > > and change/time_modify > > > > >>> in particular: > > > > >>> > > > > >>> For some layout protocols, the storage device is > > > able to notify the > > > > >>> metadata server of the occurrence of an I/O; as a > > > result, the change > > > > >>> and time_modify attributes may be updated at the > > > metadata server. > > > > >>> For a metadata server that is capable of monitoring > > > updates to the > > > > >>> change and time_modify attributes, LAYOUTCOMMIT > > > processing is not > > > > >>> required to update the change attribute. In this > > > case, the metadata > > > > >>> server must ensure that no further update to the > > > data has occurred > > > > >>> since the last update of the attributes; file-based > > > protocols may > > > > >>> have enough information to make this determination > > > or may update the > > > > >>> change attribute upon each file modification. This > > > also applies for > > > > >>> the time_modify attribute. If the server > > > implementation is able to > > > > >>> determine that the file has not been modified since the > last > > > > >>> time_modify update, the server need not update time_modify > at > > > > >>> LAYOUTCOMMIT. At LAYOUTCOMMIT completion, the > > > updated attributes > > > > >>> should be visible if that file was modified since > > > the latest previous > > > > >>> LAYOUTCOMMIT or LAYOUTGET > > > > >> > > > > >> I know. However the above paragraph does not state that > > > the server > > > > >> should make those changes visible to clients other than > > > the one that is > > > > >> writing. > > > > >> > > > > >> Section 18.32.4 states that writes will cause the > > > time_modified and > > > > >> change attributes to be updated (if and only if the file data > is > > > > >> modified). Several other sections rely on this > > > behaviour, including > > > > >> section 10.3.1, section 11.7.2.2, and section 11.7.7. > > > > >> > > > > >> The only 'special behaviour' that I see allowed for pNFS > > > is in section > > > > >> 13.10, which states that clients can't expect to see changes > > > > >> immediately, but that they must be able to expect close-to-open > > > > >> semantics to work. Again, if this is to be the case, > > > then the server > > > > >> _must_ be able to deal with the case where client 1 dies > > > before it can > > > > >> issue the LAYOUTCOMMIT. > > > > > > > > Agreed. > > > > > > > > >> > > > > >> > > > > >>>> As I see it, if your server allows one client to read > > > data that may have > > > > >>>> been modified by another client that holds a WRITE > > > layout for that range > > > > >>>> then (since that is a visible data change) it should > > > provide a change > > > > >>>> attribute update irrespective of whether or not a > > > LAYOUTCOMMIT has been > > > > >>>> sent. > > > > >>> > > > > >>> the requirement for the server in WRITE's > > > implementation section > > > > >>> is quite weak: "It is assumed that the act of writing > > > data to a file will > > > > >>> cause the time_modified and change attributes of the > > > file to be updated." > > > > >>> > > > > >>> The difference here is that for pNFS the written data > > > is not guaranteed > > > > >>> to be visible until LAYOUTCOMMIT. In a broader sense, > > > assuming the clients > > > > >>> are caching dirty data and use a write-behind cache, > > > application-written data > > > > >>> may be visible to other processes on the same host but > > > not to others until > > > > >>> fsync() or close() - open-to-close semantics are the > > > only thing the client > > > > >>> guarantees, right? Issuing LAYOUTCOMMIT on fsync() and > > > close() ensure the > > > > >>> data is committed to stable storage and is visible to > > > all other clients in > > > > >>> the cluster. > > > > >> > > > > >> See above. I'm not disputing your statement that 'the > > > written data is > > > > >> not guaranteed to be visible until LAYOUTCOMMIT'. I am > > > disputing an > > > > >> assumption that 'the written data may be visible without > > > an accompanying > > > > >> change attribute update'. > > > > > > > > > > > > > > > In other words, I'd expect the following scenario to give the > same > > > > > results in NFSv4.1 w/pNFS as it does in NFSv4: > > > > > > > > That's a strong requirement that may limit the scalability > > > of the server. > > > > > > > > The spirit of the pNFS operations, at least from Panasas > > > perspective was that > > > > the data is transient until LAYOUTCOMMIT, meaning it may or > > > may not be visible > > > > to clients other than the one who wrote it, and its > > > associated metadata MUST > > > > be updated and describe the new data only on LAYOUTCOMMIT > > > and until then it's > > > > undefined, i.e. it's up to the server implementation > > > whether to update it or not. > > > > > > > > Without locking, what do the stronger semantics buy you? > > > > Even if a client verified the change_attribute new data may > > > become visible > > > > at any time after the GETATTR if the file/byte range aren't > locked. > > > > > > There is no locking needed in the scenario below: it is ordinary > > > close-to-open semantics. > > > > > > The point is that if you remove the one and only way that clients > have > > > to determine whether or not their data caches are valid, then they > can > > > no longer cache data at all, and server scalability will be shot to > > > smithereens anyway. > > > > > > Trond > > > > > > > Benny > > > > > > > > > > > > > > Client 1 Client 2 > > > > > ======== ======== > > > > > > > > > > OPEN foo > > > > > READ > > > > > CLOSE > > > > > OPEN > > > > > LAYOUTGET ... > > > > > WRITE via DS > > > > > <dies>... > > > > > OPEN foo > > > > > verify change_attr > > > > > READ if above WRITE is visible > > > > > CLOSE > > > > > > > > > > Trond > > > > > _______________________________________________ > > > > > nfsv4 mailing list > > > > > nfsv4@xxxxxxxx > > > > > https://www.ietf.org/mailman/listinfo/nfsv4 > > > > > > > > > _______________________________________________ > > > nfsv4 mailing list > > > nfsv4@xxxxxxxx > > > https://www.ietf.org/mailman/listinfo/nfsv4 > > > > > > > > > _______________________________________________ > nfsv4 mailing list > nfsv4@xxxxxxxx > https://www.ietf.org/mailman/listinfo/nfsv4 > -- To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
