Re: NFS and /dev/mdXpY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for reply, Steve!

parameters are pretty trivial, (rw,insecure) for exports, and defaults while mounting via ``mount host:/path /path'' command.

Yes. That sounds interesting, since XFS works fine with there partitions.
Also, I must say it's WD20EARS drives (with 4kb sector size, though parted says it's 512b).

I also tried another NFS daemon implementation (cvs version, not .22) -- unfsd (unfs3).
It mounts ok, but when I try to write any file to the server -- I get the same error (Stale NFS file handle).

And on the server side in dmesg I see this:

--
NFS: server 172.17.2.2 error: fileid changed
fsid 0:f: expected fileid 0x2033, got 0xb6d1e05fa150ce09
NFS: server 172.17.2.2 error: fileid changed
fsid 0:f: expected fileid 0x2033, got 0x26550b0132c0b1
NFS: server 172.17.2.2 error: fileid changed
fsid 0:f: expected fileid 0x2033, got 0x8202a60053000020
NFS: server 172.17.2.2 error: fileid changed
fsid 0:f: expected fileid 0x2033, got 0xe542f93ebc8fe157
NFS: server 172.17.2.2 error: fileid changed
fsid 0:f: expected fileid 0x2033, got 0xc00cd74ea904301
--

looks like NFS protocol doesn't like something in partitioned software RAID.

On Wed, 21 Apr 2010 12:39:08 -0400
Steve Cousins <steve.cousins@xxxxxxxxx> wrote:

> Since md2 with XFS is acting fine locally, it seems to be an NFS issue. 
> What export and mounting parameters are you using?
> 
> 
> Vlad Glagolev wrote:
> > Well, hello there,
> >
> > Posted it on linux-kernel ML also, and post it here, for more specific analysis.
> >
> > I faced this problem today while trying to mount some NFS share on OpenBSD box.
> > I mounted it successfully without any visible errors, but I wasn't able to cd there, the printed error was:
> >
> > ksh: cd: /storage - Stale NFS file handle
> >
> > Apropos, the partition is 5.5 TB. I tried another one on my box and it was mounted successfully. It was possible to manage files there too. Its size is ~3GB.
> > That's why the first time I thought about some size limitations of OpenBSD/Linux/NFS.
> >
> > While talking on #openbsd @ freenode, I discovered this via tcpdump on both sides:
> >
> > http://pastebin.ca/1864713
> >
> > Googling for 3 hours didn't help at all, some posts had similiar issue but either with no answer at all or without any full description.
> >
> > Then I started to experiment with another Linux box to kill the possible different variants.
> >
> > On another box I also have nfs-utils 1.1.6 and kernel 2.6.32. Mounting that big partition was unsuccessful, it got just stuck. On tcpdump I've seen this:
> >
> > --
> >     172.17.2.5.884 > 172.17.2.2.2049: Flags [.], cksum 0x25e4 (correct), seq 1, ack 1, win 92, options [nop,nop,TS val 1808029984 ecr 1618999], length 0
> >     172.17.2.5.3565791363 > 172.17.2.2.2049: 40 null
> >     172.17.2.2.2049 > 172.17.2.5.884: Flags [.], cksum 0x25e6 (correct), seq 1, ack 45, win 46, options [nop,nop,TS val 1618999 ecr 1808029984], length 0
> >     172.17.2.2.2049 > 172.17.2.5.3565791363: reply ok 24 null
> >     172.17.2.5.884 > 172.17.2.2.2049: Flags [.], cksum 0x259b (correct), seq 45, ack 29, win 92, options [nop,nop,TS val 1808029985 ecr 1618999], length 0
> >     172.17.2.5.3582568579 > 172.17.2.2.2049: 40 null
> >     172.17.2.2.2049 > 172.17.2.5.3582568579: reply ok 24 null
> >     172.17.2.5.3599345795 > 172.17.2.2.2049: 92 fsinfo fh Unknown/0100030005030100000800000000000000000000000000000000000000000000
> >     172.17.2.2.2049 > 172.17.2.5.3599345795: reply ok 32 fsinfo ERROR: Stale NFS file handle POST:
> >     172.17.2.5.3616123011 > 172.17.2.2.2049: 92 fsinfo fh Unknown/0100030005030100000800000000000000000000000000000000000000000000
> >     172.17.2.2.2049 > 172.17.2.5.3616123011: reply ok 32 fsinfo ERROR: Stale NFS file handle POST:
> >     172.17.2.5.884 > 172.17.2.2.2049: Flags [F.], cksum 0x2449 (correct), seq 281, ack 129, win 92, options [nop,nop,TS val 1808029986 ecr 1618999], length 0
> >     172.17.2.2.2049 > 172.17.2.5.884: Flags [F.], cksum 0x2476 (correct), seq 129, ack 282, win 46, options [nop,nop,TS val 1618999 ecr 1808029986], length 0
> >     172.17.2.5.884 > 172.17.2.2.2049: Flags [.], cksum 0x2448 (correct), seq 282, ack 130, win 92, options [nop,nop,TS val 1808029986 ecr 1618999], length 0
> > --
> >
> > familiar messages, eh?
> >
> > Since that time I've solved that's not OpenBSD problem. So only NFS and Linux left as the reasons of this.
> > It was possible to mount that small partition on Linux box too, the same as on OpenBSD.
> >
> > But afterthat I recongnized an interesting issue: I have different sw raid setups on my storage server.
> > I tried to mount a small partition on the same md device where 5.5TB partition is located, and got the same
> > error message! Now I'm sure it's about NFS <-> MDADM setup, that's why I called the topic like this.
> >
> > A bit about my setup:
> >
> > # cat /proc/mdstat 
> > Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] [multipath] 
> > md3 : active raid1 sdc1[0] sdd1[1]
> >       61376 blocks [2/2] [UU]
> >       
> > md1 : active raid5 sdc2[2] sdd2[3] sdb2[1] sda2[0]
> >       3153408 blocks level 5, 512k chunk, algorithm 2 [4/4] [UUUU]
> >       
> > md2 : active raid5 sdc3[2] sdd3[3] sdb3[1] sda3[0]
> >       5857199616 blocks level 5, 512k chunk, algorithm 2 [4/4] [UUUU]
> >       
> > md0 : active raid1 sdb1[1] sda1[0]
> >       61376 blocks [2/2] [UU]
> >       
> > unused devices: <none>
> >
> > md0, md1, and md3 aren't so interesting, since fs is created directly on them, and that's a _problem device_:
> >
> > # parted /dev/md2
> > GNU Parted 2.2
> > Using /dev/md2
> > Welcome to GNU Parted! Type 'help' to view a list of commands.
> > (parted) p free                                                           
> > p free
> > Model: Unknown (unknown)
> > Disk /dev/md2: 5998GB
> > Sector size (logical/physical): 512B/512B
> > Partition Table: gpt
> >
> > Number  Start   End     Size    File system     Name   Flags
> >         17.4kB  1049kB  1031kB  Free Space
> >  1      1049kB  2147MB  2146MB  linux-swap(v1)  swap
> >  2      2147MB  23.6GB  21.5GB  xfs             home
> >  3      23.6GB  24.7GB  1074MB  xfs             temp
> >  4      24.7GB  35.4GB  10.7GB  xfs             user
> >  5      35.4GB  51.5GB  16.1GB  xfs             var
> >  6      51.5GB  5998GB  5946GB  xfs             vault
> >         5998GB  5998GB  507kB   Free Space
> >
> > # ls /dev/md?*
> > /dev/md0  /dev/md1  /dev/md2  /dev/md2p1  /dev/md2p2  /dev/md2p3  /dev/md2p4  /dev/md2p5  /dev/md2p6  /dev/md3
> >
> > It's very handy partitioning scheme where I can extend (grow 5th raid) with more hdds only /vault partition while "loosing" (a.k.a. not using for this partition) only ~1gb of space from every 2TB drive.
> >
> > System boots ok and xfs_check passes with no problems, etc.
> > The only problem: it's not possible to use NFS shares on any partition of /dev/md2 device.
> >
> > Finally, my question to NFS and MDADM developers: any idea?
> >
> >   
> 


-- 
Dont wait to die to find paradise...
--
Cheerz,
Vlad "Stealth" Glagolev

Attachment: pgpz6d2cKZa9u.pgp
Description: PGP signature


[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux