I'm running some performance tests on NFSv3 on a slightly hacked 2.6.31 kernel.
Both: 64-bit linux.
Dual-port 10G NIC, 82599 (I think, at any rate it's the new Intel 5GT/s pci-e gen2 chipset, ixgbe driver)
MTU 1500
Server: dual Intel E5530 2.4Ghz processors.
Serving 2 25M files from tmpfs (RAM)
Client: Core i7 3.2Ghz, quad-core.
I'm running 10 mac-vlans on each physical interface, one NFS mount per interface
(my patches are to allow multiple mounts per client OS).
one reader for each mac-vlan and one on the physical, reading 16m chunks
O_DIRECT is enabled for the readers.
Mounts are using 'noatime', leaving everything else at defaults.
Total read bandwidth is about 12Gbps, but it varies quite a bit and I've seen short term (10 seconds or so)
averages go up to 15Gbps. These are on-the-wire stats reported by the NICs, not actual NFS throughput.
Some things of interest:
* Rates bounce around several Gbps
* I see tcp retransmits in netstat -s on the server
* I see zero errors (pkt loss, etc) reported by the NICs.
* Reading 100M files slows down the test.
* 2M and 16M reads are about equivalent (the normal bouncing of the rates makes it hard to tell)
* Messing with rmem max, backlog, and other network tunings doesn't seem to matter.
* Running 10 readers (5 on each physical NIC) ran at 16Gbps for a few seconds (higher than I'd
seen with 10..but then it went back down to around 13Gbps.
* Running 6 seems slower..about 11.5Gbps on average.
* Using 9000 MTU yields a fairly steady 16.5Gbps throughput. This may be about the max
IO bandwidth for the server machine...but I know the client can do full 10Gbps tx + rx
on both ports (using pktgen and 1514 byte pkts).
Here is snippet of top on the client. bthelper is the thing doing the reads:
top - 17:26:25 up 13 min, 3 users, load average: 25.45, 23.12, 13.98
Tasks: 227 total, 3 running, 224 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.2%us, 1.4%sy, 0.0%ni, 74.4%id, 0.0%wa, 0.6%hi, 23.4%si, 0.0%st
Mem: 12326604k total, 1343680k used, 10982924k free, 30912k buffers
Swap: 14254072k total, 0k used, 14254072k free, 112084k cached
1586 root 15 -5 0 0 0 R 39.2 0.0 1:47.91 rpciod/6
22 root 15 -5 0 0 0 R 38.5 0.0 1:46.94 ksoftirqd/6
3841 root 3 -17 49320 33m 980 D 20.3 0.3 0:23.05 bthelper
3840 root 3 -17 49320 33m 980 D 18.9 0.3 0:23.43 bthelper
3836 root 3 -17 49320 33m 980 D 12.0 0.3 0:26.39 bthelper
3849 root 3 -17 49320 33m 980 D 11.3 0.3 0:22.74 bthelper
And, here is the server:
top - 17:28:02 up 2:03, 2 users, load average: 0.08, 0.47, 0.68
Tasks: 291 total, 1 running, 290 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 2.5%sy, 0.0%ni, 95.5%id, 0.0%wa, 0.2%hi, 1.7%si, 0.0%st
Mem: 12325312k total, 617720k used, 11707592k free, 8240k buffers
Swap: 0k total, 0k used, 0k free, 101016k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2171 root 15 -5 0 0 0 S 4.0 0.0 4:41.54 nfsd
2163 root 15 -5 0 0 0 S 3.6 0.0 3:06.09 nfsd
2166 root 15 -5 0 0 0 S 3.6 0.0 4:45.78 nfsd
2176 root 15 -5 0 0 0 S 3.6 0.0 4:45.45 nfsd
2164 root 15 -5 0 0 0 S 3.3 0.0 3:08.28 nfsd
2165 root 15 -5 0 0 0 S 3.3 0.0 4:20.12 nfsd
2167 root 15 -5 0 0 0 S 3.3 0.0 4:31.29 nfsd
2170 root 15 -5 0 0 0 S 3.3 0.0 4:50.80 nfsd
2174 root 15 -5 0 0 0 S 3.3 0.0 4:50.74 nfsd
2168 root 15 -5 0 0 0 S 3.0 0.0 4:53.15 nfsd
2169 root 15 -5 0 0 0 S 3.0 0.0 4:48.07 nfsd
I'm curious if anyone else has done similar testing...
Thanks,
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
