Re: [PATCH 4/5] nfs-utils: add IPv6 support to nfsd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On May 27, 2009, at 7:54 AM, Jeff Layton wrote:

Add support for handing off IPv6 sockets to the kernel for nfsd. One of the main goals here is to not change the behavior of options and not to
add any new ones, so this patch attempts to do that.

We also don't want to break anything in the event that someone has an
rpc.nfsd program built with IPv6 capability, but the knfsd doesn't
support IPv6. Ditto for the cases where IPv6 is either not compiled in
or is compiled in and blacklisted.

Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>
---
utils/nfsd/nfsd.c | 158 +++++++++++++++++++++++++++++++++++++++++ +-----------
1 files changed, 125 insertions(+), 33 deletions(-)

diff --git a/utils/nfsd/nfsd.c b/utils/nfsd/nfsd.c
index 2a3cd0a..77c7e1b 100644
--- a/utils/nfsd/nfsd.c
+++ b/utils/nfsd/nfsd.c
@@ -41,17 +41,24 @@ static struct option longopts[] =
};
unsigned int protobits = NFSCTL_ALLBITS;
unsigned int versbits = NFSCTL_ALLBITS;
-int minorvers4 = NFSD_MAXMINORVERS4;		/* nfsv4 minor version */
-char *haddr = NULL;

int
main(int argc, char **argv)
{
-	int	count = 1, c, error, port, fd, found_one;
+	int	count = 1, c, error = 0, port, fd, found_one;
	struct servent *ent;
	struct hostent *hp;
	char *p;
-	struct sockaddr_in sin;
+	struct sockaddr_in sin = { };
+	struct sockaddr_in6 sin6 = { };
+	int minorvers4 = NFSD_MAXMINORVERS4;	/* nfsv4 minor version */
+	char	*haddr = NULL;
+	int	ipv4 = 1;
+#ifdef IPV6_SUPPORTED
+	int	ipv6 = 1;
+#else  /* IPV6_SUPPORTED */
+	int	ipv6 = 0;
+#endif /* IPV6_SUPPORTED */

	ent = getservbyname ("nfs", "udp");
	if (ent != NULL)
@@ -62,15 +69,9 @@ main(int argc, char **argv)
while ((c = getopt_long(argc, argv, "H:hN:p:P:TU", longopts, NULL)) != EOF) {
		switch(c) {
		case 'H':
-			if (inet_addr(optarg) != INADDR_NONE) {
-				haddr = strdup(optarg);
-			} else if ((hp = gethostbyname(optarg)) != NULL) {
-				haddr = inet_ntoa((*(struct in_addr*)(hp->h_addr_list[0])));
-			} else {
-				fprintf(stderr, "%s: Unknown hostname: %s\n",
-					argv[0], optarg);
-				usage(argv [0]);
-			}
+			/* we only deal with one host addr at the moment */
+			free(haddr);
+			haddr = strdup(optarg);
			break;
		case 'P':	/* XXX for nfs-server compatibility */
		case 'p':
@@ -98,24 +99,79 @@ main(int argc, char **argv)
			}
			break;
		case 'T':
-				NFSCTL_TCPUNSET(protobits);
-				break;
+			NFSCTL_TCPUNSET(protobits);
+			break;
		case 'U':
-				NFSCTL_UDPUNSET(protobits);
-				break;
+			NFSCTL_UDPUNSET(protobits);
+			break;

Clean up: separate patch?

		default:
			fprintf(stderr, "Invalid argument: '%c'\n", c);
		case 'h':
			usage(argv[0]);
		}
	}
-	/*
-	 * Do some sanity checking, if the ctlbits are set
-	 */
+
+	/* sanity checks */
+
+	/* if an address was specified, check it first */
+	if (haddr) {
+		/* does it look like an addr of some sort? */
+		if (inet_pton(AF_INET, haddr, &sin.sin_addr)) {
+			ipv6 = 0;
+			goto family_check;
+		} else if (inet_pton(AF_INET6, haddr, &sin6.sin6_addr)) {
+			ipv4 = 0;
+			goto family_check;
+		}

Using getaddrinfo(3) with AI_NUMERICHOST might allow a lot of simplification here. See utils/new-statd/hostname.c in my repo for some possibilities.

You could also easily pass the text version of the -p option into getaddrinfo() to have it plant the port number into the bind address.

This logic is complex enough that you may want to extract it into a helper anyway.

+
+		/* see if it's a hostname */
+		hp = gethostbyname(haddr);
+		if (!hp) {
+			fprintf(stderr, "%s: gethostbyname on %s failed: %d\n",
+					argv[0], haddr, h_errno);
+			error = h_errno;
+			usage(argv[0]);
+		}
+
+		switch (hp->h_addrtype) {
+		case AF_INET:
+			ipv6 = 0;
+			memcpy(&sin.sin_addr, hp->h_addr_list[0],
+			       hp->h_length);
+			if (sin.sin_addr.s_addr == INADDR_NONE) {
+				fprintf(stderr, "%s: Bad hostaddr %s\n",
+						argv[0], haddr);
+				usage(argv[0]);
+			}
+			break;
+#ifdef IPV6_SUPPORTED
+		case AF_INET6:
+			ipv4 = 0;
+			memcpy(&sin6.sin6_addr, hp->h_addr_list[0],
+			       hp->h_length);
+			break;
+#endif /* IPV6_SUPPORTED */
+		default:
+			fprintf(stderr, "%s: unsupported address family %d\n",
+					argv[0], hp->h_addrtype);
+			exit(0);
+		}
+	}
+
+family_check:
+	/* make sure at least one address family is enabled */
+	if (!ipv4 && !ipv6) {
+		fprintf(stderr, "no address families enabled\n");
+		exit(1);
+	}

Is this needed if you don't have -4 and -6? I'm still familiarizing myself with these patches, but I have a vague feeling that this checking could be made much simpler, especially if the netconfig- related logic was introduced at the same time rather than in a separate patch.

+
+	/* make sure at least one protocol type is enabled */
	if (!NFSCTL_UDPISSET(protobits) && !NFSCTL_TCPISSET(protobits)) {
		fprintf(stderr, "invalid protocol specified\n");
		exit(1);
	}
+
+	/* make sure that at least one version is enabled */
	found_one = 0;
	for (c = NFSD_MINVERS; c <= NFSD_MAXVERS; c++) {
		if (NFSCTL_VERISSET(versbits, c))
@@ -126,14 +182,11 @@ main(int argc, char **argv)
		exit(1);
	}			

+	/* must have TCP for NFSv4 */
	if (NFSCTL_VERISSET(versbits, 4) && !NFSCTL_TCPISSET(protobits)) {
		fprintf(stderr, "version 4 requires the TCP protocol\n");
		exit(1);
	}
-	if (haddr == NULL) {
-		struct in_addr in = {INADDR_ANY};
-		haddr = strdup(inet_ntoa(in));
-	}

	if (chdir(NFS_STATEDIR)) {
		fprintf(stderr, "%s: chdir(%s) failed: %s\n",
@@ -148,6 +201,12 @@ main(int argc, char **argv)
				"%s: invalid server count (%d), using 1\n",
				argv[0], count);
			count = 1;
+		} else if (count == 0) {
+			/*
+			 * don't bother setting anything else if the threads
+			 * are coming down anyway.
+			 */
+			goto set_threads;
		}
	}
	/* KLUDGE ALERT:
@@ -163,24 +222,55 @@ main(int argc, char **argv)
		(void) dup2(fd, 2);
	}
	closeall(3);
+	openlog("nfsd", LOG_PID, LOG_DAEMON);

Might be nice if rpc.nfsd used xlog() instead.  Maybe for another day.

-	sin.sin_family = AF_INET;
-	sin.sin_port = htons(port);
-	sin.sin_addr.s_addr = inet_addr(haddr);
+	/*
+	 * skip everything but setting of number of threads if sockets are
+	 * already open and in use.
+	 */
+	if (nfssvc_inuse())
+		goto set_threads;

	/*
	 * must set versions before the fd's so that the right versions get
	 * registered with rpcbind. Note that on older kernels w/o the right
	 * interfaces, these are a no-op.
	 */
-	if (!nfssvc_inuse()) {
-		nfssvc_setvers(versbits, minorvers4);
- error = nfssvc_setfds(protobits, (struct sockaddr *) &sin, sizeof(sin));
-		if (error)
-			goto out;
+	nfssvc_setvers(versbits, minorvers4);
+
+	if (ipv4) {
+		sin.sin_family = AF_INET;
+		sin.sin_port = htons(port);
+		if (!haddr)
+			sin.sin_addr.s_addr = INADDR_ANY;
+
+ if (nfssvc_setfds(protobits, (struct sockaddr *) &sin, sizeof(sin)))
+			ipv4 = 0;
	}

-	openlog("nfsd", LOG_PID, LOG_DAEMON);
+#ifdef IPV6_SUPPORTED
+	if (ipv6) {
+		sin6.sin6_family = AF_INET6;
+		sin6.sin6_port = htons(port);
+		if (!haddr)
+			sin6.sin6_addr = in6addr_any;
+
+ if (nfssvc_setfds(protobits, (struct sockaddr *) &sin6, sizeof(sin6)))
+			ipv6 = 0;
+	}
+#endif /* IPV6_SUPPORTED */
+
+	/*
+ * if ipv4 and ipv6 are both 0 here, then we were unable to pass off sockets
+	 * to the kernel. Don't try to bring up any threads.
+	 */
+	if (!ipv4 && !ipv6 && count > 0) {
+		syslog(LOG_ERR, "nfssvc: failed to hand off sockets to kernel\n");
+		error = -1;
+		goto out;
+	}
+
+set_threads:
	if ((error = nfssvc_threads(port, count)) < 0) {
		int e = errno;
		syslog(LOG_ERR, "nfssvc: %s", strerror(e));
@@ -188,6 +278,8 @@ main(int argc, char **argv)
	}

out:
+	free(haddr);
+	closelog();
	return (error != 0);
}

--
1.6.0.6


--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystem Development]     [Linux USB Development]     [Linux Media Development]     [Video for Linux]     [Linux NILFS]     [Linux Audio Users]     [Yosemite Info]     [Linux SCSI]

  Powered by Linux