Folks,
I have a question regarding the behavior of nfsd v3 running over TCP.
Specifically how should the NFS server behave if the clock is moved
backwards on the server. I've tried to find references to what the
correct behavior should be and have been unable to, so I'm posting to
this list with the hope someone can point me to where I can find it.
I'm running a 2.6.10 kernel on 2 systems, one acting as an NFS server
the other as the client (obviously). I advertise to the client a
directory that contains several files which I mount on the client as /app
On the server I run the following test:
while ;
do
date 022910002008;
sleep 10;
date 022910102008;
sleep 10;
done
on the client I run the following in /app
while :
do
ls
sleep 10
done
What I observe is that often I see long pauses when doing the ls before
it actually displays the data.
I ran tcpdump and what I observed is that the NFS server closed the
connection when the timestamp of ACK for a packet sent by the client is
earlier than the timestamp for the original packet, i.e. between the
receipt of the original packet and the sending of the ACK the clock went
backwards. For example:
Frame 1019 contains this packet
TCP nfs > legent-1 [FIN, ACK] Seq=961 Ack=937 Win=1448 Len=0
TSV=979162569 TSER=979004710
0000 00 14 f8 ec 30 2f 00 14 f8 ec 47 11 08 00 45 00 ....0/.. ..G...E.
0010 00 34 2a 2c 40 00 40 06 ba 95 a9 fe 01 01 a9 fe .4*,@.@. ........
0020 01 05 08 01 01 75 03 a6 6d a7 a9 d3 d4 ff 80 11 .....u.. m.......
0030 05 a8 69 d4 00 00 01 01 08 0a 3a 5c d5 c9 3a 5a ..i..... ..:\..:Z
0040 6d 26
and is time stamped (using wireshark) 2008-02-29 02:00:00.911651. The
original packet for which this is the ACK is frame 924 and contains:
TCP legent-1 > nfs [ACK] Seq=937 Ack=961 Win=1460 Len=0
TSV=979004710 TSER=979159895
0000 00 14 f8 ec 47 11 00 14 f8 ec 30 2f 08 00 45 00 ....G... ..0/..E.
0010 00 34 2b e9 40 00 40 06 b8 d8 a9 fe 01 05 a9 fe .4+.@.@. ........
0020 01 01 01 75 08 01 a9 d3 d4 ff 03 a6 6d a7 80 10 ...u.... ....m...
0030 05 b4 74 3b 00 00 01 01 08 0a 3a 5a 6d 26 3a 5c ..t;.... ..:Zm&:\
0040 cb 57 .W
Wireshark reports the RTT as:
[The RTT to ACK the segment was: -7.377099000 seconds]
After the server disconnects the client has to reconnect and it is looks
like the delay is occurring during this disconnect/reconnect process.
Can someone point me to any documentation, either for NFS or TCP that
explains the behavior? Note that this problem does not occur with UDP
so I suspect it's a consequence of the connection oriented aspects of
the TCP protocol vs UDP, but it would nice to see it in writing.
I appreciate any assistance, flames, or other comments :-)
Thank you,
Paolo
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
