Hi all,
Today's linux-next merge of the sched-ext tree got conflicts in:
kernel/sched/fair.c
kernel/sched/syscalls.c
between commits:
84d265281d6c ("sched/pelt: Use rq_clock_task() for hw_pressure")
5d871a63997f ("sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c")
from the tip tree and commit:
96fd6c65efc6 ("sched: Factor out update_other_load_avgs() from __update_blocked_others()")
from the sched-ext tree.
I fixed it up (I used the latter version of kernel/sched/fair.c and see
below) and can carry the fix as necessary. This is now fixed as far as
linux-next is concerned, but any non trivial conflicts should be
mentioned to your upstream maintainer when your tree is submitted for
merging. You may also want to consider cooperating with the maintainer
of the conflicting tree to minimise any particularly complex conflicts.
--
Cheers,
Stephen Rothwell
diff --cc kernel/sched/syscalls.c
index cb03c790c27a,7ecade89eada..000000000000
--- a/kernel/sched/syscalls.c
+++ b/kernel/sched/syscalls.c
@@@ -258,6 -258,126 +258,28 @@@ int sched_core_idle_cpu(int cpu
#endif
+ #ifdef CONFIG_SMP
+ /*
+ * Load avg and utiliztion metrics need to be updated periodically and before
+ * consumption. This function updates the metrics for all subsystems except for
+ * the fair class. @rq must be locked and have its clock updated.
+ */
+ bool update_other_load_avgs(struct rq *rq)
+ {
+ u64 now = rq_clock_pelt(rq);
+ const struct sched_class *curr_class = rq->curr->sched_class;
+ unsigned long hw_pressure = arch_scale_hw_pressure(cpu_of(rq));
+
+ lockdep_assert_rq_held(rq);
+
++ /* hw_pressure doesn't care about invariance */
+ return update_rt_rq_load_avg(now, rq, curr_class == &rt_sched_class) |
+ update_dl_rq_load_avg(now, rq, curr_class == &dl_sched_class) |
- update_hw_load_avg(now, rq, hw_pressure) |
++ update_hw_load_avg(rq_clock_task(rq), rq, hw_pressure) |
+ update_irq_load_avg(rq, 0);
+ }
-
-/*
- * This function computes an effective utilization for the given CPU, to be
- * used for frequency selection given the linear relation: f = u * f_max.
- *
- * The scheduler tracks the following metrics:
- *
- * cpu_util_{cfs,rt,dl,irq}()
- * cpu_bw_dl()
- *
- * Where the cfs,rt and dl util numbers are tracked with the same metric and
- * synchronized windows and are thus directly comparable.
- *
- * The cfs,rt,dl utilization are the running times measured with rq->clock_task
- * which excludes things like IRQ and steal-time. These latter are then accrued
- * in the IRQ utilization.
- *
- * The DL bandwidth number OTOH is not a measured metric but a value computed
- * based on the task model parameters and gives the minimal utilization
- * required to meet deadlines.
- */
-unsigned long effective_cpu_util(int cpu, unsigned long util_cfs,
- unsigned long *min,
- unsigned long *max)
-{
- unsigned long util, irq, scale;
- struct rq *rq = cpu_rq(cpu);
-
- scale = arch_scale_cpu_capacity(cpu);
-
- /*
- * Early check to see if IRQ/steal time saturates the CPU, can be
- * because of inaccuracies in how we track these -- see
- * update_irq_load_avg().
- */
- irq = cpu_util_irq(rq);
- if (unlikely(irq >= scale)) {
- if (min)
- *min = scale;
- if (max)
- *max = scale;
- return scale;
- }
-
- if (min) {
- /*
- * The minimum utilization returns the highest level between:
- * - the computed DL bandwidth needed with the IRQ pressure which
- * steals time to the deadline task.
- * - The minimum performance requirement for CFS and/or RT.
- */
- *min = max(irq + cpu_bw_dl(rq), uclamp_rq_get(rq, UCLAMP_MIN));
-
- /*
- * When an RT task is runnable and uclamp is not used, we must
- * ensure that the task will run at maximum compute capacity.
- */
- if (!uclamp_is_used() && rt_rq_is_runnable(&rq->rt))
- *min = max(*min, scale);
- }
-
- /*
- * Because the time spend on RT/DL tasks is visible as 'lost' time to
- * CFS tasks and we use the same metric to track the effective
- * utilization (PELT windows are synchronized) we can directly add them
- * to obtain the CPU's actual utilization.
- */
- util = util_cfs + cpu_util_rt(rq);
- util += cpu_util_dl(rq);
-
- /*
- * The maximum hint is a soft bandwidth requirement, which can be lower
- * than the actual utilization because of uclamp_max requirements.
- */
- if (max)
- *max = min(scale, uclamp_rq_get(rq, UCLAMP_MAX));
-
- if (util >= scale)
- return scale;
-
- /*
- * There is still idle time; further improve the number by using the
- * IRQ metric. Because IRQ/steal time is hidden from the task clock we
- * need to scale the task numbers:
- *
- * max - irq
- * U' = irq + --------- * U
- * max
- */
- util = scale_irq_capacity(util, irq, scale);
- util += irq;
-
- return min(scale, util);
-}
-
-unsigned long sched_cpu_util(int cpu)
-{
- return effective_cpu_util(cpu, cpu_util_cfs(cpu), NULL, NULL);
-}
+ #endif /* CONFIG_SMP */
+
/**
* find_process_by_pid - find a process with a matching PID value.
* @pid: the pid in question.
Attachment:
pgp3Z1EcH4MUf.pgp
Description: OpenPGP digital signature
