On Mon, 9 Oct 2023 at 12:48, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Mon, Oct 09, 2023 at 02:48:27PM +0530, Rohit Agarwal wrote:
> >
> > On 10/4/2023 6:16 PM, Greg KH wrote:
> > > On Wed, Oct 04, 2023 at 12:17:27PM +0530, Rohit Agarwal wrote:
> > > > On 10/4/2023 12:13 PM, Greg KH wrote:
> > > > > On Wed, Oct 04, 2023 at 01:22:47PM +1100, Stephen Rothwell wrote:
> > > > > > Hi all,
> > > > > >
> > > > > > After merging the usb tree, today's linux-next build (x86_64 allmodconfig)
> > > > > > failed like this:
> > > > > >
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:156:43: error: 'QPHY_V6_PCS_SW_RESET' undeclared here (not in a function); did you mean 'QPHY_V2_PCS_SW_RESET'?
> > > > > > 156 | [QPHY_SW_RESET] = QPHY_V6_PCS_SW_RESET,
> > > > > > | ^~~~~~~~~~~~~~~~~~~~
> > > > > > | QPHY_V2_PCS_SW_RESET
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:157:43: error: 'QPHY_V6_PCS_START_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_START_CONTROL'?
> > > > > > 157 | [QPHY_START_CTRL] = QPHY_V6_PCS_START_CONTROL,
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > | QPHY_V3_PCS_START_CONTROL
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:158:43: error: 'QPHY_V6_PCS_PCS_STATUS1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_PCS_STATUS1'?
> > > > > > 158 | [QPHY_PCS_STATUS] = QPHY_V6_PCS_PCS_STATUS1,
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~
> > > > > > | QPHY_V5_PCS_PCS_STATUS1
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:159:43: error: 'QPHY_V6_PCS_POWER_DOWN_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_POWER_DOWN_CONTROL'?
> > > > > > 159 | [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_POWER_DOWN_CONTROL,
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > | QPHY_V3_PCS_POWER_DOWN_CONTROL
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:162:43: error: 'QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL'?
> > > > > > 162 | [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > | QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:163:44: error: 'QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR'?
> > > > > > 163 | [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > | QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:991:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG1'?
> > > > > > 991 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:992:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_LOCK_DETECT_CONFIG2'?
> > > > > > 992 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:993:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG3' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG3'?
> > > > > > 993 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:994:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG6' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG6'?
> > > > > > 994 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:997:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L'?
> > > > > > 997 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:998:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H'?
> > > > > > 998 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:999:26: error: 'QPHY_V6_PCS_CDR_RESET_TIME' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_CDR_RESET_TIME'?
> > > > > > 999 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1000:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG1'?
> > > > > > 1000 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1001:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG2'?
> > > > > > 1001 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1003:26: error: 'QPHY_V6_PCS_EQ_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG1'?
> > > > > > 1003 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1004:26: error: 'QPHY_V6_PCS_EQ_CONFIG5' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG5'?
> > > > > > 1004 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1008:26: error: 'QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL'?
> > > > > > 1008 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1009:26: error: 'QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2'?
> > > > > > 1009 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1010:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L'?
> > > > > > 1010 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1011:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H'?
> > > > > > 1011 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> > > > > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> > > > > > 78 | .offset = o, \
> > > > > > | ^
> > > > > >
> > > > > > Caused by commit
> > > > > >
> > > > > > 685dbd1b2306 ("phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support")
> > > > > >
> > > > > > I have used the usb tree from next-20231003 for today.
> > > > > Thanks, I've now reverted this from my tree.
> > > > As mentioned in the cover letter of these changes, the series was dependent
> > > > on the other submitted series [1], [2].
> > > Ah, I missed that, I almost never read cover letters :)
> > >
> > > > Can you also pick these series [1], [2] to resolve this build failures.
> > > > [1] https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@xxxxxxxxxx/
> > > > [2] https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@xxxxxxxxxx/
> > > How about you just send this change with these others, or all of them as
> > > one big series so they can be applied in the proper order?
> > Adding Dmitry as well.
> >
> > I see some of the dependent patches are already applied and the patches from
> > [2] are not.
> > Since all the rest dependent changes are already applied,
> > you can pick series[2] and then this series that should also be fine.
> > Please let me know if this is fine?
>
> What is "this" series? I don't have any of these in my inbox at all
> anymore, sorry. Please resend the pending patches that need to be
> applied to my usb tree and I will be glad to do so.
Actually, I wonder why the PHY patches were merged through the USB
tree, maybe that is the issue here.
--
With best wishes
Dmitry
