Hi,
I add Luis into Cc.
On Tue 2023-03-21 11:42:56, Naresh Kamboju wrote:
> The following kernel crash was noticed on arm64 Juno-r2 and Raspberry Pi 4
> Model B on Linux next-20230321.
>
> Reported-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>
>
> log:
> ----
> [ 3.071500] Unable to handle kernel paging request at virtual
> address 0000000000001000
I guess that this is exactly PAGE_SIZE (4k).
> [ 3.079432] Mem abort info:
> [ 3.082225] ESR = 0x0000000096000004
> [ 3.085977] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 3.091295] SET = 0, FnV = 0
> [ 3.094350] EA = 0, S1PTW = 0
> [ 3.097491] FSC = 0x04: level 0 translation fault
> [ 3.102373] Data abort info:
> [ 3.105252] ISV = 0, ISS = 0x00000004
> [ 3.109089] CM = 0, WnR = 0
> [ 3.112055] [0000000000001000] user address but active_mm is swapper
> [ 3.114230] usb 1-1: new high-speed USB device number 2 using ehci-platform
> [ 3.118418] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
> [ 3.118426] Modules linked in:
> [ 3.134717] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 6.3.0-rc3-next-20230321 #1
> [ 3.142126] Hardware name: ARM Juno development board (r2) (DT)
> [ 3.148052] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 3.155027] pc : string (lib/vsprintf.c:644 lib/vsprintf.c:726)
> [ 3.158443] lr : vsnprintf (lib/vsprintf.c:2817)
> [ 3.162196] sp : ffff80000b34b8f0
> [ 3.165511] x29: ffff80000b34b8f0 x28: ffff800009d7b1ca x27: ffff80000b34bab0
> [ 3.172666] x26: ffff800009d7b1ca x25: 0000000000000020 x24: 0000000000000008
> [ 3.179820] x23: 00000000ffffffd8 x22: ffff8000099858a0 x21: ffff80000b34bc30
> [ 3.186973] x20: ffff80000b34ba90 x19: ffff80000b34ba98 x18: 000000003c98bfdd
> [ 3.194127] x17: 000000000000001c x16: 00000000eec48da2 x15: 00000000a9dbdd17
> [ 3.201280] x14: ffff80000b0242e8 x13: 0000000057a049ef x12: 00000000cfa47237
> [ 3.208433] x11: 0000000000000001 x10: 00000000bd5b8780 x9 : ffff80000812cbec
> [ 3.215586] x8 : 00000000ffffffff x7 : 0000000000000002 x6 : ffff80000b34ba98
> [ 3.222739] x5 : ffffffffffffffff x4 : 0000000000000000 x3 : ffff0a00ffffff04
> [ 3.229891] x2 : 0000000000001000 x1 : 0000000000000000 x0 : ffff80000b34bab0
> [ 3.237044] Call trace:
> [ 3.239489] string (lib/vsprintf.c:644 lib/vsprintf.c:726)
This is the line where vsprintf() reads a string to be printed:
static char *string_nocheck(char *buf, char *end, const char *s,
struct printf_spec spec)
{
int len = 0;
int lim = spec.precision;
while (lim--) {
----> char c = *s++;
> [ 3.242551] vsnprintf (lib/vsprintf.c:2817)
> [ 3.245954] vprintk_store (kernel/printk/printk.c:2200)
> [ 3.249712] vprintk_emit (kernel/printk/printk.c:2297)
> [ 3.253381] vprintk_default (kernel/printk/printk.c:2328)
> [ 3.257137] vprintk (kernel/printk/printk_safe.c:50)
> [ 3.260198] _printk (kernel/printk/printk.c:2341)
> [ 3.263257] sysctl_err (fs/proc/proc_sysctl.c:1109)
> [ 3.266577] __register_sysctl_table (fs/proc/proc_sysctl.c:1140
> fs/proc/proc_sysctl.c:1383)
> [ 3.271202] __register_sysctl_init (fs/proc/proc_sysctl.c:1462)
The has been done some reractoring/modification of this code
by the patchset ("[PATCH 00/11] sysctl: deprecate
register_sysctl_paths()"), see
https://lore.kernel.org/lkml/20230302202826.776286-1-mcgrof@xxxxxxxxxx/
Luis, does it trigger any bell, please?
Do you have an idea where this code could pass a pointer PAGE_SIZE
as string to printk("%s")?
Best Regards,
Petr
> [ 3.275569] memory_failure_sysctl_init (mm/memory-failure.c:152)
> [ 3.280281] do_one_initcall (init/main.c:1306)
> [ 3.280453] hub 1-1:1.0: USB hub found
> [ 3.284123] kernel_init_freeable (init/main.c:1378 init/main.c:1395
> init/main.c:1414 init/main.c:1634)
> [ 3.284133] kernel_init (init/main.c:1526)
> [ 3.288246] hub 1-1:1.0: 4 ports detected
> [ 3.292239] ret_from_fork (arch/arm64/kernel/entry.S:871)
> [ 3.292250] Code: 91000400 110004e1 eb08009f 540000c0 (38646845)
> All code
> ========
> 0:* 00 04 00 add %al,(%rax,%rax,1) <-- trapping instruction
> 3: 91 xchg %eax,%ecx
> 4: e1 04 loope 0xa
> 6: 00 11 add %dl,(%rcx)
> 8: 9f lahf
> 9: 00 08 add %cl,(%rax)
> b: eb c0 jmp 0xffffffffffffffcd
> d: 00 00 add %al,(%rax)
> f: 54 push %rsp
> 10: 45 rex.RB
> 11: 68 .byte 0x68
> 12: 64 fs
> 13: 38 .byte 0x38
>
> Code starting with the faulting instruction
> ===========================================
> 0: 45 rex.RB
> 1: 68 .byte 0x68
> 2: 64 fs
> 3: 38 .byte 0x38
> [ 3.309416] ---[ end trace 0000000000000000 ]---
> [ 3.314037] note: swapper/0[1] exited with irqs disabled
> [ 3.319392] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [ 3.327060] SMP: stopping secondary CPUs
> [ 3.331189] Kernel Offset: disabled
> [ 3.334678] CPU features: 0x400002,0c3c0400,0000421b
> [ 3.339649] Memory Limit: none
> [ 3.342708] ---[ end Kernel panic - not syncing: Attempted to kill
> init! exitcode=0x0000000b ]---
>
> links:
> ----
> - https://qa-reports.linaro.org/lkft/linux-next-master-sanity/build/next-20230321/testrun/15765295/suite/log-parser-test/tests/
> - https://qa-reports.linaro.org/lkft/linux-next-master-sanity/build/next-20230321/testrun/15765168/suite/log-parser-test/tests/
> - https://qa-reports.linaro.org/lkft/linux-next-master-sanity/build/next-20230321/testrun/15765168/suite/log-parser-test/test/check-kernel-panic/details/
>
> metadata:
> git_ref: master
> git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
> git_sha: f3594f0204b756638267242e26d9de611435c3ba
> git_describe: next-20230321
> kernel_version: 6.3.0-rc3
> kernel-config:
> https://storage.tuxsuite.com/public/linaro/lkft/builds/2NJ83YzjXEfP00u1LgnjMjjZfxo/config
> build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/812627412/
> artifact-location:
> https://storage.tuxsuite.com/public/linaro/lkft/builds/2NJ83YzjXEfP00u1LgnjMjjZfxo
> toolchain: gcc-11
>
>
> --
> Linaro LKFT
> https://lkft.linaro.org
