linux-next: manual merge of the ftrace tree with the jc_docs tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

Today's linux-next merge of the ftrace tree got a conflict in:

  Documentation/trace/histogram.rst

between commit:

  2abfcd293b79 ("docs: ftrace: always use canonical ftrace path")

from the jc_docs tree and commit:

  a2ff84a5d1e6 ("tracing/histogram: Wrap remaining shell snippets in code blocks")

from the ftrace tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc Documentation/trace/histogram.rst
index 7b7e4893b8f6,8e95295e39b6..000000000000
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@@ -1861,9 -1864,9 +1864,9 @@@ A histogram can now be defined for the 
  The above shows the latency "lat" in a power of 2 grouping.
  
  Like any other event, once a histogram is enabled for the event, the
- output can be displayed by reading the event's 'hist' file.
+ output can be displayed by reading the event's 'hist' file::
  
 -  # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/hist
 +  # cat /sys/kernel/tracing/events/synthetic/wakeup_latency/hist
  
    # event histogram
    #
@@@ -1908,10 -1911,10 +1911,10 @@@
  
  
  The latency values can also be grouped linearly by a given size with
- the ".buckets" modifier and specify a size (in this case groups of 10).
+ the ".buckets" modifier and specify a size (in this case groups of 10)::
  
    # echo 'hist:keys=pid,prio,lat.buckets=10:sort=lat' >> \
 -        /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
 +        /sys/kernel/tracing/events/synthetic/wakeup_latency/trigger
  
    # event histogram
    #
@@@ -2052,13 -2182,13 +2182,13 @@@ The following commonly-used handler.act
  
        # echo 'hist:keys=$testpid:testpid=pid:onmatch(sched.sched_wakeup_new).\
                wakeup_new_test($testpid) if comm=="cyclictest"' >> \
 -              /sys/kernel/debug/tracing/events/sched/sched_wakeup_new/trigger
 +              /sys/kernel/tracing/events/sched/sched_wakeup_new/trigger
  
-     Or, equivalently, using the 'trace' keyword syntax:
+     Or, equivalently, using the 'trace' keyword syntax::
  
-     # echo 'hist:keys=$testpid:testpid=pid:onmatch(sched.sched_wakeup_new).\
-             trace(wakeup_new_test,$testpid) if comm=="cyclictest"' >> \
-             /sys/kernel/tracing/events/sched/sched_wakeup_new/trigger
+       # echo 'hist:keys=$testpid:testpid=pid:onmatch(sched.sched_wakeup_new).\
+               trace(wakeup_new_test,$testpid) if comm=="cyclictest"' >> \
 -              /sys/kernel/debug/tracing/events/sched/sched_wakeup_new/trigger
++              /sys/kernel/tracing/events/sched/sched_wakeup_new/trigger
  
      Creating and displaying a histogram based on those events is now
      just a matter of using the fields and new synthetic event in the
@@@ -2191,48 -2321,48 +2321,48 @@@
      resulting latency, stored in wakeup_lat, exceeds the current
      maximum latency, a snapshot is taken.  As part of the setup, all
      the scheduler events are also enabled, which are the events that
-     will show up in the snapshot when it is taken at some point:
+     will show up in the snapshot when it is taken at some point::
  
-     # echo 1 > /sys/kernel/tracing/events/sched/enable
 -      # echo 1 > /sys/kernel/debug/tracing/events/sched/enable
++      # echo 1 > /sys/kernel/tracing/events/sched/enable
  
-     # echo 'hist:keys=pid:ts0=common_timestamp.usecs \
-             if comm=="cyclictest"' >> \
-             /sys/kernel/tracing/events/sched/sched_waking/trigger
+       # echo 'hist:keys=pid:ts0=common_timestamp.usecs \
+               if comm=="cyclictest"' >> \
 -              /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
++              /sys/kernel/tracing/events/sched/sched_waking/trigger
  
-     # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: \
-             onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio, \
- 	    prev_comm):onmax($wakeup_lat).snapshot() \
- 	    if next_comm=="cyclictest"' >> \
- 	    /sys/kernel/tracing/events/sched/sched_switch/trigger
+       # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: \
+               onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio, \
+ 	      prev_comm):onmax($wakeup_lat).snapshot() \
+ 	      if next_comm=="cyclictest"' >> \
 -	      /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
++	      /sys/kernel/tracing/events/sched/sched_switch/trigger
  
      When the histogram is displayed, for each bucket the max value
      and the saved values corresponding to the max are displayed
      following the rest of the fields.
  
      If a snapshot was taken, there is also a message indicating that,
-     along with the value and event that triggered the global maximum:
+     along with the value and event that triggered the global maximum::
  
-     # cat /sys/kernel/tracing/events/sched/sched_switch/hist
-       { next_pid:       2101 } hitcount:        200
- 	max:         52  next_prio:        120  next_comm: cyclictest \
-         prev_pid:          0  prev_prio:        120  prev_comm: swapper/6
 -      # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
++      # cat /sys/kernel/tracing/events/sched/sched_switch/hist
+         { next_pid:       2101 } hitcount:        200
+ 	  max:         52  next_prio:        120  next_comm: cyclictest \
+           prev_pid:          0  prev_prio:        120  prev_comm: swapper/6
  
-       { next_pid:       2103 } hitcount:       1326
- 	max:        572  next_prio:         19  next_comm: cyclictest \
-         prev_pid:          0  prev_prio:        120  prev_comm: swapper/1
+         { next_pid:       2103 } hitcount:       1326
+ 	  max:        572  next_prio:         19  next_comm: cyclictest \
+           prev_pid:          0  prev_prio:        120  prev_comm: swapper/1
  
-       { next_pid:       2102 } hitcount:       1982 \
- 	max:         74  next_prio:         19  next_comm: cyclictest \
-         prev_pid:          0  prev_prio:        120  prev_comm: swapper/5
+         { next_pid:       2102 } hitcount:       1982 \
+ 	  max:         74  next_prio:         19  next_comm: cyclictest \
+           prev_pid:          0  prev_prio:        120  prev_comm: swapper/5
  
-     Snapshot taken (see tracing/snapshot).  Details:
- 	triggering value { onmax($wakeup_lat) }:        572	\
- 	triggered by event with key: { next_pid:       2103 }
+       Snapshot taken (see tracing/snapshot).  Details:
+ 	  triggering value { onmax($wakeup_lat) }:        572	\
+ 	  triggered by event with key: { next_pid:       2103 }
  
-     Totals:
-         Hits: 3508
-         Entries: 3
-         Dropped: 0
+       Totals:
+           Hits: 3508
+           Entries: 3
+           Dropped: 0
  
      In the above case, the event that triggered the global maximum has
      the key with next_pid == 2103.  If you look at the bucket that has
@@@ -2310,15 -2440,15 +2440,15 @@@
      $cwnd variable.  If the value has changed, a snapshot is taken.
      As part of the setup, all the scheduler and tcp events are also
      enabled, which are the events that will show up in the snapshot
-     when it is taken at some point:
+     when it is taken at some point::
  
-     # echo 1 > /sys/kernel/tracing/events/sched/enable
-     # echo 1 > /sys/kernel/tracing/events/tcp/enable
 -      # echo 1 > /sys/kernel/debug/tracing/events/sched/enable
 -      # echo 1 > /sys/kernel/debug/tracing/events/tcp/enable
++      # echo 1 > /sys/kernel/tracing/events/sched/enable
++      # echo 1 > /sys/kernel/tracing/events/tcp/enable
  
-     # echo 'hist:keys=dport:cwnd=snd_cwnd: \
-             onchange($cwnd).save(snd_wnd,srtt,rcv_wnd): \
- 	    onchange($cwnd).snapshot()' >> \
- 	    /sys/kernel/tracing/events/tcp/tcp_probe/trigger
+       # echo 'hist:keys=dport:cwnd=snd_cwnd: \
+               onchange($cwnd).save(snd_wnd,srtt,rcv_wnd): \
+ 	      onchange($cwnd).snapshot()' >> \
 -	      /sys/kernel/debug/tracing/events/tcp/tcp_probe/trigger
++	      /sys/kernel/tracing/events/tcp/tcp_probe/trigger
  
      When the histogram is displayed, for each bucket the tracked value
      and the saved values corresponding to that value are displayed

Attachment: pgpJ7nIOsFOxc.pgp
Description: OpenPGP digital signature


[Index of Archives]     [Linux Kernel]     [Linux USB Development]     [Yosemite News]     [Linux SCSI]

  Powered by Linux