Fixes "make htmldocs" warnings. Reported-by: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> Signed-off-by: David Jander <david@xxxxxxxxxxx> --- include/linux/spi/spi.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index eac8d3caf954..2e63b4935deb 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -35,7 +35,8 @@ extern struct bus_type spi_bus_type; /** * struct spi_statistics - statistics for spi transfers - * @lock: lock protecting this structure + * @syncp: seqcount to protect members in this struct for per-cpu udate + * on 32-bit systems * * @messages: number of spi-messages handled * @transfers: number of spi_transfers handled @@ -155,7 +156,7 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer); * @cs_inactive: delay to be introduced by the controller after CS is * deasserted. If @cs_change_delay is used from @spi_transfer, then the * two delays will be added up. - * @statistics: statistics for the spi_device + * @pcpu_statistics: statistics for the spi_device * * A @spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -439,7 +440,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @max_native_cs: When cs_gpiods is used, and this field is filled in, * spi_register_controller() will validate all native CS (including the * unused native CS) against this value. - * @statistics: statistics for the spi_controller + * @pcpu_statistics: statistics for the spi_controller * @dma_tx: DMA transmit channel * @dma_rx: DMA receive channel * @dummy_rx: dummy receive buffer for full-duplex devices -- 2.32.0