On Tue, Jun 07, 2022 at 02:19:58PM +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced these warnings:
>
> Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
> Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
> Text in column margin in table line 33.
>
> ====================== ====================================
> curr[1-2]_label "iin[12]"
> curr[1-2]_input Measured input current
> curr[1-2]_max Maximum input current
> curr[1-2]_max_alarm Current high alarm
>
> curr[3-4]_label "iout[1-2]"
> curr[3-4]_input Measured output current
> curr[3-4]_highest Highest measured output current
> curr[3-4]_max Maximum output current
> curr[3-4]_max_alarm Output current high alarm
>
> in[1-2]_label "vin[12]"
> in[1-2]_input Measured input voltage
> in[1-2]_highest Highest measured input voltage
> in[1-2]_crit Critical maximum input voltage
> in[1-2]_crit_alarm Input voltage critical high alarm
> in[1-2]_min Minimum input voltage
> in[1-2]_min_alarm Input voltage low alarm
> in[1-2]_rated_min Rated minimum input voltage
> in[1-2]_rated_max Rated maximum input voltage
> in1_reset_history Write to reset history for all attributes
>
> in[3-5]_label "vmon[1-3]"
> in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
> Only available if enabled with MFR_ADC_CONTROL_LT7182S
> command.
>
> in[3-4|6-7]_label "vout[1-2]"
> in[3-4|6-7]_input Measured output voltage
> in[3-4|6-7]_highest Highest measured output voltage
> in[3-4|6-7]_lcrit Critical minimum output voltage
> in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
> in[3-4|6-7]_min Minimum output voltage
> in[3-4|6-7]_max_alarm Output voltage low alarm
> in[3-4|6-7]_max Maximum output voltage
> in[3-4|6-7]_max_alarm Output voltage high alarm
> in[3-4|6-7]_crit Critical maximum output voltage
> in[3-4|6-7]_crit_alarm Output voltage critical high alarm
>
> power[1-2]_label "pout[1-2]"
> power[1-2]_input Measured output power
>
> temp1_input Measured temperature
> temp1_crit Critical high temperature
> temp1_crit_alarm Chip temperature critical high alarm
> temp1_max Maximum temperature
> temp1_max_alarm Chip temperature high alarm
> ====================== ====================================
>
> Introduced by commit
>
> 3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
>
Hi Stephen,
The warning above doesn't appear when doing htmldocs build using Sphinx
installed from pip on my system.
Cc-ing linux-doc list.
--
An old man doll... just what I always wanted! - Clara
