Re: [PATCH v2 2/3] MIPS: cm/cpc: export some missing symbols to be able to use them from driver code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Oct 30, 2021 at 7:21 AM Sergio Paracuellos
<sergio.paracuellos@xxxxxxxxx> wrote:
>
> Hi Bjorn,
>
> On Fri, Oct 29, 2021 at 10:27 PM Sergio Paracuellos
> <sergio.paracuellos@xxxxxxxxx> wrote:
> >
> > On Fri, Oct 29, 2021 at 9:47 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > >
> > > On Fri, Oct 29, 2021 at 09:37:53PM +0200, Sergio Paracuellos wrote:
> > > > On Fri, Oct 29, 2021 at 8:49 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > > > > On Fri, Oct 29, 2021 at 07:28:47AM +0200, Sergio Paracuellos wrote:
> > > > > > On Thu, Oct 28, 2021 at 10:47 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> > > > > > > On Thu, Oct 28, 2021 at 11:59:17AM +0200, Sergio Paracuellos wrote:
> > > > > > > > On Thu, Oct 28, 2021 at 11:34 AM Sergio Paracuellos
> > > > > > > > <sergio.paracuellos@xxxxxxxxx> wrote:
> > > > > > > > > On Thu, Oct 28, 2021 at 11:24 AM Thomas Bogendoerfer
> > > > > > > > > <tsbogend@xxxxxxxxxxxxxxxx> wrote:
> > > > > > > > > > On Thu, Oct 28, 2021 at 06:11:18AM +0200, Sergio Paracuellos wrote:
> > > > > > > > > > > On Thu, Oct 28, 2021 at 6:05 AM Yanteng Si <siyanteng01@xxxxxxxxx> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > Since commit 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
> > > > > > > > > > > > the MT7621 PCIe host controller driver is built as a module but modpost complains once these
> > > > > > > > > > > > drivers become modules.
> > > > > > > > > > > >
> > > > > > > > > > > > ERROR: modpost: "mips_cm_unlock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined!
> > > > > > > > > > > > ERROR: modpost: "mips_cpc_base" [drivers/pci/controller/pcie-mt7621.ko] undefined!
> > > > > > > > > > > > ERROR: modpost: "mips_cm_lock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined!
> > > > > > > > > > > > ERROR: modpost: "mips_cm_is64" [drivers/pci/controller/pcie-mt7621.ko] undefined!
> > > > > > > > > > > > ERROR: modpost: "mips_gcr_base" [drivers/pci/controller/pcie-mt7621.ko] undefined!
> > > > > > > > > > > >
> > > > > > > > > > > > Let's just export them.
> > > > > > > > > > > >
> > > > > > > > > > > > Signed-off-by: Yanteng Si <siyanteng@xxxxxxxxxxx>
> > > > > > > > > > > > ---
> > > > > > > > > > > >  arch/mips/kernel/mips-cm.c  | 5 +++++
> > > > > > > > > > > >  arch/mips/kernel/mips-cpc.c | 1 +
> > > > > > > > > > > >  2 files changed, 6 insertions(+)
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Reviewed-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> > > > > > > > > >
> > > > > > > > > > could we instead make the pcie-mt761 driver non modular ? Exporting
> > > > > > > > > > all MIPS specific stuff for just making an essential driver modular
> > > > > > > > > > doesn't IMHO make much sense.
> > > > > > > > >
> > > > > > > > > The driver is modular because I have been advised other times that new
> > > > > > > > > drivers should be able to be compiled as modules and we should avoid
> > > > > > > > > using 'bool' in Kconfig for new drivers. That's the only reason. I am
> > > > > > > > > also always including as 'y' the driver since for me not having pci in
> > > > > > > > > my boards has no sense... I am ok in changing Kconfig to be 'bool'
> > > > > > > > > instead of 'tristate', but I don't know what should be the correct
> > > > > > > > > thing to do in this case. Thoughts?
> > > > > > > >
> > > > > > > > I guess we also want the driver to at least be compile tested in
> > > > > > > > 'allmodconfig' and other similars...15692a80d949
> > > > > > >
> > > > > > > Sounds like the systems that actually use this driver require it to be
> > > > > > > built-in, and the only benefit of exporting these symbols is that we
> > > > > > > would get better compile test coverage.
> > > > > > >
> > > > > > > If that's the case, I agree that it's better to just make it
> > > > > > > non-modular.
> > > > > >
> > > > > > I agree and that was my reasoning for sending a patch to also convert
> > > > > > to bool the phy driver that this PCIe controller uses. When the pull
> > > > > > request was sent from Vinod to Greg, Greg refused to take it because
> > > > > > of that commit and the commit was reverted and a new pull request was
> > > > > > sent including this revert. This is commit 15692a80d949 ("phy: Revert
> > > > > > "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'""). Because
> > > > > > of this I also changed the PCIe controller Kconfig from bool to
> > > > > > tristate when I sent v3 of the series which at the end were the ones
> > > > > > that was finally taken. There are also other ralink related symbols
> > > > > > that have been exported to allow to compile other drivers as a
> > > > > > modules, like the watchdog. See the commit fef532ea0cd8 ("MIPS:
> > > > > > ralink: export rt_sysc_membase for rt2880_wdt.c"). So, as I said, I
> > > > > > agree and I am using the driver as if it were a bool and also ralink
> > > > > > systems normally require all drivers built-in, but I think we have to
> > > > > > take into account also the "historical facts" here. In any case,
> > > > > > Bjorn, let me know if you want me to send whatever patch might be
> > > > > > needed.
> > > > >
> > > > > I didn't see the conversation with Greg, so I don't know the whole
> > > > > story.
> > > >
> > > > Here it is: https://www.spinics.net/lists/kernel/msg3986821.html
> > > >
> > > > > For pcie-mt7621.c, it looks like the only problem is
> > > > > setup_cm_memory_region(), which does a little coherency-related stuff.
> > > > > If we could move that to arch/mips, we could still make this tristate.
> > > >
> > > > Yes, the only mips specific function used in the driver is
> > > > 'setup_cm_memory_region()'.
> > > >
> > > > > One way might be to implement a pcibios_root_bridge_prepare() for mips
> > > > > and put the setup_cm_memory_region() stuff in there.  It's not *ideal*
> > > > > because that's a strong/weak function arrangement that doesn't allow
> > > > > for multiple host bridges, but that's probably not an issue here.
> > > > >
> > > > > If we can't do that, I think making it bool is probably the right
> > > > > answer, but it would be worth a brief comment in the commit log to
> > > > > explain the issue.
> > > >
> > > > Do you mean to implement 'pcibios_root_bridge_prepare()' for MIPS
> > > > ralink? I guess this means to parse device tree and so on only to get
> > > > memory range addresses to be added to the MIPS I/O coherence regions
> > > > to make things work and then re-parse it again in the driver to do the
> > > > proper PCI setup... We end up in an arch generic driver but at the end
> > > > this controller is only present in ralink MIPS, so I am not sure that
> > > > implementing 'pcibios_root_bridge_prepare()' is worthy here... I can
> > > > explore and try to implement it if you think that it really makes
> > > > sense... but, IMHO if this is the case, just making it bool looks like
> > > > the correct thing to do.
> > >
> > > It should be trivial to put the contents of setup_cm_memory_region()
> > > into a ralink function called pcibios_root_bridge_prepare().
> > >
> > > pcibios_root_bridge_prepare() is called with the same "struct
> > > pci_host_bridge *" argument as setup_cm_memory_region(), and it's
> > > called slightly later, so the window resources are already set up, so
> > > no DT parsing is required.  It looks like a simple move and rename to
> > > me.
> >
> > I see. Thanks Bjorn. I will try the approach during the weekend and
> > report if it works.
>
> I have tested the change from 'setup_cm_memory_region()' code into
> 'pcibios_root_bridge_prepare()' just by moving and renaming it from
> the PCIe controller code. The function is properly being called.
> However, it looks like at that point, windows are not setup yet (no
> windows present at all in bridge->windows) so the system is not able
> to get the IORESOURCE_MEM resource to set up the IO coherency unit and
> the PCI failed to start:
>
> [   16.785359] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> [   16.798719] mt7621-pci 1e140000.pcie:   No bus range found for
> /pcie@1e140000, using [bus 00-ff]
> [   16.816248] mt7621-pci 1e140000.pcie:      MEM
> 0x0060000000..0x006fffffff -> 0x0060000000
> [   16.861310] mt7621-pci 1e140000.pcie:       IO
> 0x001e160000..0x001e16ffff -> 0x0000000000
> [   17.179230] mt7621-pci 1e140000.pcie: PCIE0 enabled
> [   17.188954] mt7621-pci 1e140000.pcie: PCIE1 enabled
> [   17.198678] mt7621-pci 1e140000.pcie: PCIE2 enabled
> [   17.208415] Cannot get memory resource
> [   17.215884] mt7621-pci 1e140000.pcie: Scanning root bridge failed
> [   17.228454] mt7621-pci: probe of 1e140000.pcie failed with error -22
>
> FWIW, when the function is called, I have also tried to set up
> hardcoded addresses. Doing that the IO coherency unit was properly set
> up and PCI properly worked (expected). So, using this
> 'pcibios_root_bridge_prepare()' funcion looks like a possible way to
> go but we need the addresses properly being passed into the function.
> I've also tried to list 'bridge->dma_ranges' and get resources from
> there instead of using the not already setup 'bridge->windows'. There
> is nothing inside that list also. 'bridge->bus->resources' is also
> empty... Am I missing something? I was expecting the bridge passed
> around to be the same that was in PCIe controller code, and it seems
> it is (I printed the bridge pointer itself in driver code before
> calling 'mt7621_pcie_register_host()' and in
> 'pcibios_root_bridge_prepare()' at the begging of the function and the
> pointer is the same) but windows and other stuff are not already
> present there...

Looking into [0] it looks like resources are temporarily removed from
the list just before call 'pcibios_root_bridge_prepare()'. Hence the
behaviour I am seeing when trying to get them...

[0]: https://elixir.bootlin.com/linux/latest/source/drivers/pci/probe.c#L915

Best regards,
    Sergio Paracuellos

>
> Thanks in advance for clarification.
>
> Best regards,
>      Sergio Paracuellos
>
> >
> > Best regards,
> >     Sergio Paracuellos
> >
> > >
> > > Bjorn



[Index of Archives]     [Linux Kernel]     [Linux USB Development]     [Yosemite News]     [Linux SCSI]

  Powered by Linux