Hi, I attached a patch which revise this issue. If I need to send with git send-email, please let me know. Best regards, Nobuhiro > -----Original Message----- > From: iwamatsu nobuhiro(岩松 信洋 □SWC◯ACT) > Sent: Tuesday, February 16, 2021 10:47 PM > To: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>; Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>; Stephen > Rothwell <sfr@xxxxxxxxxxxxxxxx> > Cc: David Miller <davem@xxxxxxxxxxxxx>; Networking <netdev@xxxxxxxxxxxxxxx>; Olof Johansson <olof@xxxxxxxxx>; Arnd > Bergmann <arnd@xxxxxxxx>; ARM <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; Bartosz Golaszewski > <bgolaszewski@xxxxxxxxxxxx>; Linux Next Mailing List <linux-next@xxxxxxxxxxxxxxx>; Linux Kernel Mailing List > <linux-kernel@xxxxxxxxxxxxxxx>; lkft-triage@xxxxxxxxxxxxxxxx > Subject: RE: linux-next: manual merge of the net-next tree with the arm-soc tree > > Hi, > > Thnaks for your report. > > > LKFT builders also found this problem while building arm64 dtb. > > > > > This ` causes the following build error on the next-20210216. > > > > > > DTC arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dtb > > > Error: arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error > > > FATAL ERROR: Unable to parse input tree > > > scripts/Makefile.lib:336: recipe for target 'arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dtb' failed > > > make[2]: *** [arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dtb] Error 1 > > > scripts/Makefile.build:530: recipe for target 'arch/arm64/boot/dts/toshiba' failed > > > > ref: > > https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L382 > > > > This seems to be a problem fixing the conflict. > > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=c5e188ea08290d9b6625b4bef322012c0b > 1902d7 > > ``` > diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts > index 2407b2d89c1e9..3760df93a89b5 100644 > --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts > +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts > @@ -49,4 +49,22 @@ > > &gpio { > status = "okay"; > +};` > + > +&piether { > + status = "okay"; > + phy-handle = <&phy0>; > + phy-mode = "rgmii-id"; > + clocks = <&clk300mhz>, <&clk125mhz>; > + clock-names = "stmmaceth", "phy_ref_clk"; > + > + mdio0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + phy0: ethernet-phy@1 { > + device_type = "ethernet-phy"; > + reg = <0x1>; > + }; > + }; > }; > ``` > > Stephen, could you fix this? > > Best regards, > Nobuhiro
Attachment:
0001-arm64-dts-visconti-Fix-parse-error-for-TMPV7708-RM-m.patch
Description: 0001-arm64-dts-visconti-Fix-parse-error-for-TMPV7708-RM-m.patch