Hi Randy,
(adding a few people to the CC list to discuss the proposed solution
below)
Thanks for the report.
On Mon, Jul 27, 2020 at 05:49:41PM -0700, Randy Dunlap wrote:
> On 7/27/20 6:23 AM, Stephen Rothwell wrote:
> > Hi all,
> >
> > Changes since 20200724:
>
> on x86_64:
>
> WARNING: unmet direct dependencies detected for DMA_ENGINE
> Depends on [n]: DMADEVICES [=n]
> Selected by [m]:
> - DRM_ZYNQMP_DPSUB [=m] && HAS_IOMEM [=y] && (ARCH_ZYNQMP || COMPILE_TEST [=y]) && COMMON_CLK [=y] && DRM [=m] && OF [=y]
>
> and about 45 "undefined reference" build errors (here's a sample):
>
> ld: drivers/misc/mic/scif/scif_dma.o: in function `scif_sync_dma.constprop.11':
> scif_dma.c:(.text+0x672): undefined reference to `dma_sync_wait'
> ld: drivers/spi/spi-bcm2835.o: in function `bcm2835_dma_release.isra.9':
> spi-bcm2835.c:(.text+0xb34): undefined reference to `dma_release_channel'
> ld: spi-bcm2835.c:(.text+0xc17): undefined reference to `dma_release_channel'
> ld: drivers/spi/spi-bcm2835.o: in function `bcm2835_dma_init':
> spi-bcm2835.c:(.text+0xd3c): undefined reference to `dma_request_chan'
> ld: spi-bcm2835.c:(.text+0xd8b): undefined reference to `dma_request_chan'
> ld: spi-bcm2835.c:(.text+0xf8a): undefined reference to `dma_get_slave_caps'
> ld: spi-bcm2835.c:(.text+0x11d0): undefined reference to `dma_get_slave_caps'
> ld: drivers/spi/spi-ep93xx.o: in function `ep93xx_spi_release_dma':
> spi-ep93xx.c:(.text+0x1fc): undefined reference to `dma_release_channel'
> ld: spi-ep93xx.c:(.text+0x220): undefined reference to `dma_release_channel'
> ERROR: modpost: "dma_release_channel" [drivers/gpu/drm/xlnx/zynqmp-dpsub.ko] undefined!
>
>
>
> I tried adding
> depends on DMADEVICES
> to DRM_ZYNQMP_DPSUB
>
> but that just gets into messy/ugly Kconfig
> error: recursive dependency detected!
drivers/i2c/Kconfig:8:error: recursive dependency detected!
drivers/i2c/Kconfig:8: symbol I2C is selected by FB_DDC
drivers/video/fbdev/Kconfig:63: symbol FB_DDC depends on FB
drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:80: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:74: symbol DRM_KMS_HELPER is selected by DRM_ZYNQMP_DPSUB
drivers/gpu/drm/xlnx/Kconfig:1: symbol DRM_ZYNQMP_DPSUB depends on DMA_ENGINE
drivers/dma/Kconfig:44: symbol DMA_ENGINE depends on DMADEVICES
drivers/dma/Kconfig:6: symbol DMADEVICES is selected by SND_SOC_SH4_SIU
sound/soc/sh/Kconfig:30: symbol SND_SOC_SH4_SIU is selected by SND_SIU_MIGOR
sound/soc/sh/Kconfig:60: symbol SND_SIU_MIGOR depends on I2C
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
> BTW, adding
> select DMADEVICES
> is not a good solution. We try very hard not to enable entire
> subsystems with one driver "select". (No doubt you can find a
> few examples that do just that, but it is strongly discouraged.)
If this isn't allowed, then we need to fix this where used, as that's
what seems to cause the recursive dependency. Would the following
patches be acceptable in your opinion ? If so I'll submit them proper.
commit 410e29afd54fd23ee94cd1842b51b7a9e2f96cd8
Author: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Date: Wed Jul 29 01:19:40 2020 +0300
treewide: kconfig: Replace 'select' DMAENGINES 'with depends on'
Enabling a whole subsystem from a single driver 'select' is frowned
upon and won't be accepted in new drivers, that need to use 'depends on'
instead. Existing selection of DMAENGINES will then cause circular
dependencies. Replace them with a dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index e4c422d806be..b9f8514909bf 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -37,7 +37,7 @@ config RAPIDIO_ENABLE_RX_TX_PORTS
config RAPIDIO_DMA_ENGINE
bool "DMA Engine support for RapidIO"
depends on RAPIDIO
- select DMADEVICES
+ depends on DMADEVICES
select DMA_ENGINE
help
Say Y here if you want to use DMA Engine frameork for RapidIO data
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index dc20f0f7080a..ef8a29b9f641 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -30,8 +30,8 @@ config SND_SOC_SH4_FSI
config SND_SOC_SH4_SIU
tristate
depends on ARCH_SHMOBILE && HAVE_CLK
+ depends on DMADEVICES
select DMA_ENGINE
- select DMADEVICES
select SH_DMAE
select FW_LOADER
commit 3e68c8fc7a2f3f7992c7fa8b30108d3831c7fb3b
Author: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Date: Wed Jul 29 01:23:32 2020 +0300
drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency
The dpsub driver uses the DMA engine API, and thus selects DMA_ENGINE to
provide that API. DMA_ENGINE depends on DMADEVICES, which can be
deselected by the user, creating a possibly unmet indirect dependency:
WARNING: unmet direct dependencies detected for DMA_ENGINE
Depends on [n]: DMADEVICES [=n]
Selected by [m]:
- DRM_ZYNQMP_DPSUB [=m] && HAS_IOMEM [=y] && (ARCH_ZYNQMP || COMPILE_TEST [=y]) && COMMON_CLK [=y] && DRM [=m] && OF [=y]
Add a dependency on DMADEVICES to fix this.
Reported-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
diff --git a/drivers/gpu/drm/xlnx/Kconfig b/drivers/gpu/drm/xlnx/Kconfig
index aa6cd889bd11..b52c6cdfc0b8 100644
--- a/drivers/gpu/drm/xlnx/Kconfig
+++ b/drivers/gpu/drm/xlnx/Kconfig
@@ -2,6 +2,7 @@ config DRM_ZYNQMP_DPSUB
tristate "ZynqMP DisplayPort Controller Driver"
depends on ARCH_ZYNQMP || COMPILE_TEST
depends on COMMON_CLK && DRM && OF
+ depends on DMADEVICES
select DMA_ENGINE
select DRM_GEM_CMA_HELPER
select DRM_KMS_CMA_HELPER
> Full randconfig file is attached.
>
> Reported-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
[snip]
--
Regards,
Laurent Pinchart
