I test linux next kernel atomisp driver,
i have RIP: 0010:gmin_subdev_add.cold+0x318/0x327
[atomisp_gmin_platform] problem.
<4>[ 14.682805] atomisp_gmin_platform: module is from the staging
directory, the quality is unknown, you have been warned.
<4>[ 14.689979] atomisp_ov2680: module is from the staging
directory, the quality is unknown, you have been warned.
<6>[ 14.731837] Bluetooth: hci0: BCM: chip id 94
<6>[ 14.755073] Bluetooth: hci0: BCM: features 0x2e
<6>[ 14.773197] ov2680 i2c-OVTI2680:00: ov2680_probe: ACPI detected
it on bus ID=CAMF, HID=OVTI2680
<6>[ 14.785846] Bluetooth: hci0: 4343A0
<6>[ 14.792137] ov2680 i2c-OVTI2680:00: gmin: power management
provided via XPower AXP288 PMIC (i2c addr 0x34)
<6>[ 14.802327] Bluetooth: hci0: BCM4343A0 (001.001.034) build 0000
<4>[ 14.807641] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_CamClk
<4>[ 14.817816] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_ClkSrc
<4>[ 14.823406] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_CsiPort
<4>[ 14.828612] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_CsiLanes
<4>[ 14.834398] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_eldo1_1p8v
<4>[ 14.840137] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_eldo1_sel_reg
<4>[ 14.845688] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_eldo1_ctrl_shift
<4>[ 14.851015] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_eldo2_1p8v
<4>[ 14.855670] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_eldo2_sel_reg
<4>[ 14.860492] ov2680 i2c-OVTI2680:00: Failed to find variable
OVTI2680:00_eldo2_ctrl_shift
<4>[ 14.865530] ov2680 i2c-OVTI2680:00: Failed to find gmin variable
gmin_V1P8GPIO
<4>[ 14.870561] ov2680 i2c-OVTI2680:00: Failed to find gmin variable
gmin_V2P8GPIO
<6>[ 14.964566] ov2680 i2c-OVTI2680:00: camera pdata: port: 0 lanes:
1 order: 00000002
<6>[ 14.981483] ov2680 i2c-OVTI2680:00: sensor_revision id = 0x2680, rev= 0
<6>[ 14.992912] ov2680 i2c-OVTI2680:00: register atomisp i2c module type 1
<6>[ 15.076738] ov2680 i2c-OVTI2680:01: ov2680_probe: ACPI detected
it on bus ID=CAMC, HID=OVTI2680
<6>[ 15.087549] ov2680 i2c-OVTI2680:01: gmin: power management
provided via XPower AXP288 PMIC
<4>[ 15.092635] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_CamClk
<4>[ 15.097714] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_ClkSrc
<4>[ 15.102945] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_CsiPort
<4>[ 15.106725] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_CsiLanes
<4>[ 15.110626] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_eldo1_1p8v
<4>[ 15.114341] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_eldo1_sel_reg
<4>[ 15.118499] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_eldo1_ctrl_shift
<4>[ 15.122227] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_eldo2_1p8v
<4>[ 15.125832] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_eldo2_sel_reg
<4>[ 15.129543] ov2680 i2c-OVTI2680:01: Failed to find variable
OVTI2680:01_eldo2_ctrl_shift
<1>[ 15.132560] BUG: kernel NULL pointer dereference, address:
0000000000000002
<1>[ 15.135250] #PF: supervisor read access in kernel mode
<1>[ 15.138090] #PF: error_code(0x0000) - not-present page
<6>[ 15.140878] PGD 80000001387db067 P4D 80000001387db067 PUD 1387c4067 PMD 0
<4>[ 15.143686] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[ 15.146471] CPU: 3 PID: 1498 Comm: ueventd Tainted: G C
5.7.0-android-x86_64+ #2
<4>[ 15.149315] Hardware name: jumper EZpad/EZpad, BIOS
Jumper8.S106x.A00C.1066 12/22/2015
<4>[ 15.152258] RIP: 0010:gmin_subdev_add.cold+0x318/0x327
[atomisp_gmin_platform]
<4>[ 15.155193] Code: 73 f1 ff ff b9 01 00 00 00 31 f6 4c 89 ef 48
c7 c2 e9 d6 3f c0 89 83 94 0b 40 c0 e8 57 f1 ff ff 89 83 9c 0b 40 c0
48 8b 04 24 <0f> b7 40 02 88 83 84 0b 40 c0 e9 9b fe ff ff 45 31 f6 49
8d 7d 20
<4>[ 15.158259] RSP: 0018:ffffb16dc0423a68 EFLAGS: 00010282
<4>[ 15.161534] RAX: 0000000000000000 RBX: 0000000000000080 RCX:
0000000000001933
<4>[ 15.164648] RDX: 000000000000192b RSI: 3702d5d18502d9c4 RDI:
000000000002e700
<4>[ 15.167667] RBP: 0000000000000001 R08: 00000000fffffffe R09:
003900ab007100bd
<4>[ 15.170659] R10: 00bd008900b80057 R11: 001200c500900010 R12:
ffff8fcdb7e9ea20
<4>[ 15.173689] R13: ffff8fcdb96d9820 R14: ffffffffc0400ba0 R15:
ffff8fcdb7e9ea20
<4>[ 15.176728] FS: 0000000000000000(0000)
GS:ffff8fcdbad80000(0063) knlGS:00000000081cd0b4
<4>[ 15.179781] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
<4>[ 15.183054] CR2: 0000000000000002 CR3: 0000000139418000 CR4:
00000000001006e0
<4>[ 15.186172] Call Trace:
<4>[ 15.189322] gmin_camera_platform_data+0x2f/0x60 [atomisp_gmin_platform]
<4>[ 15.192520] ov2680_probe+0x104/0x40a [atomisp_ov2680]
<4>[ 15.195758] ? acpi_device_wakeup_disable+0x15/0x50
<4>[ 15.198976] i2c_device_probe+0x9d/0x270
<4>[ 15.202203] really_probe+0xfa/0x3c0
<4>[ 15.205768] driver_probe_device+0x5d/0x100
<4>[ 15.208924] device_driver_attach+0x53/0x60
<4>[ 15.212074] __driver_attach+0x96/0x140
<4>[ 15.215157] ? device_driver_attach+0x60/0x60
<4>[ 15.218258] ? device_driver_attach+0x60/0x60
<4>[ 15.221350] bus_for_each_dev+0x78/0xc0
<4>[ 15.224620] bus_add_driver+0x184/0x1f0
<4>[ 15.227817] driver_register+0x6c/0xc0
<4>[ 15.230795] i2c_register_driver+0x3e/0x90
<4>[ 15.233683] ? 0xffffffffc03a8000
<4>[ 15.236506] do_one_initcall+0x4f/0x230
<4>[ 15.239372] ? free_vmap_area_noflush+0x97/0xf0
<4>[ 15.242181] ? kmem_cache_alloc_trace+0x27/0x230
<4>[ 15.244940] do_init_module+0x5c/0x230
<4>[ 15.247842] load_module+0x268b/0x2910
<4>[ 15.250509] ? vfs_read+0x129/0x150
<4>[ 15.253121] ? __do_sys_finit_module+0xd2/0x110
<4>[ 15.255790] __do_sys_finit_module+0xd2/0x110
<4>[ 15.258666] do_fast_syscall_32+0x8e/0x280
<4>[ 15.261375] entry_SYSENTER_compat+0x7c/0x8e
<4>[ 15.264082] Modules linked in: atomisp_ov2680(C+)
atomisp_gmin_platform(C) bmc150_accel_i2c bmc150_accel_core
industrialio_triggered_buffer kfifo_buf hci_uart btintel btqca btbcm
btrtl bluetooth ecdh_generic ecc 8250_dw dwc3 ulpi dwc3_pci axp20x_pek
extcon_axp288 roles axp288_adc industrialio axp20x_i2c axp20x lpc_ich
efi_pstore efivars gpio_keys soc_button_array sdcardfs
<4>[ 15.270350] CR2: 0000000000000002
<4>[ 15.273539] ---[ end trace 0a1f800ffb2b1049 ]---
<4>[ 15.282452] RIP: 0010:gmin_subdev_add.cold+0x318/0x327
[atomisp_gmin_platform]
<4>[ 15.285758] Code: 73 f1 ff ff b9 01 00 00 00 31 f6 4c 89 ef 48
c7 c2 e9 d6 3f c0 89 83 94 0b 40 c0 e8 57 f1 ff ff 89 83 9c 0b 40 c0
48 8b 04 24 <0f> b7 40 02 88 83 84 0b 40 c0 e9 9b fe ff ff 45 31 f6 49
8d 7d 20
<4>[ 15.289313] RSP: 0018:ffffb16dc0423a68 EFLAGS: 00010282
<4>[ 15.292991] RAX: 0000000000000000 RBX: 0000000000000080 RCX:
0000000000001933
<4>[ 15.296583] RDX: 000000000000192b RSI: 3702d5d18502d9c4 RDI:
000000000002e700
<4>[ 15.300123] RBP: 0000000000000001 R08: 00000000fffffffe R09:
003900ab007100bd
<4>[ 15.303643] R10: 00bd008900b80057 R11: 001200c500900010 R12:
ffff8fcdb7e9ea20
<4>[ 15.307181] R13: ffff8fcdb96d9820 R14: ffffffffc0400ba0 R15:
ffff8fcdb7e9ea20
<4>[ 15.310663] FS: 0000000000000000(0000)
GS:ffff8fcdbad80000(0063) knlGS:00000000081cd0b4
<4>[ 15.314202] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
<4>[ 15.317761] CR2: 0000000000000002 CR3: 0000000139418000 CR4:
00000000001006e0
