Re: linux-next: build warning after merge of the aspeed tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 6 May 2020 at 23:13, Joel Stanley <joel@xxxxxxxxx> wrote:
>
> Hi Rob,
>
> On Wed, 6 May 2020 at 23:10, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
> >
> > Hi all,
> >
> > After merging the aspeed tree, today's linux-next build (arm
> > multi_v7_defconfig) produced this warning:
>
> Thanks Stephen.
>
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:126.11-130.4: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10: I2C bus unit address format error, expected "40000010"
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:128.3-30: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10:reg: I2C address must be less than 10-bits, got "0x40000010"
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:137.11-141.4: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@100/ipmb3@10: I2C bus unit address format error, expected "40000010"
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:139.3-30: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@100/ipmb3@10:reg: I2C address must be less than 10-bits, got "0x40000010"
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:148.11-152.4: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@180/ipmb5@10: I2C bus unit address format error, expected "40000010"
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:150.3-30: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@180/ipmb5@10:reg: I2C address must be less than 10-bits, got "0x40000010"
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:159.11-163.4: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@300/ipmb7@10: I2C bus unit address format error, expected "40000010"
> > arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:161.3-30: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@300/ipmb7@10:reg: I2C address must be less than 10-bits, got "0x40000010"
>
> These are IPMB nodes with the SLAVE_ADDRESS bit set:
>
> +&i2c5 {
> +       //Host3 IPMB bus
> +       status = "okay";
> +       multi-master;
> +       ipmb5@10 {
> +               compatible = "ipmb-dev";
> +               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> +               i2c-protocol;
> +       };
>
> This is a correct entry, so dtc should not warn about it.

I sent a patch for dtc here:
https://lore.kernel.org/lkml/20200508063904.60162-1-joel@xxxxxxxxx/

Cheers,

Joel



[Index of Archives]     [Linux Kernel]     [Linux USB Development]     [Yosemite News]     [Linux SCSI]

  Powered by Linux