Hi Joel,
I am looking into fixing warning for my patch. If you have any idea or suggestions, please advice.
Regards
-Vijay
On 2/10/20, 1:45 PM, "Stephen Rothwell" <sfr@xxxxxxxxxxxxxxxx> wrote:
Hi all,
After merging the aspeed tree, today's linux-next build (arm
multi_v7_defconfig) failed like this:
arch/arm/boot/dts/aspeed-g6.dtsi:322.35-327.7: ERROR (duplicate_node_names): /ahb/apb/syscon@1e6e2000/interrupt-controller: Duplicate node name
ERROR: Input tree has errors, aborting (use -f to force output)
Caused by commit
091ff5206ef3 ("ARM: dts: aspeed: ast2600: Fix SCU IRQ controller node addresses")
Also these warnings:
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts:435.11-439.4: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@140/ipmb0@10: I2C bus unit address format error, expected "40000010"
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts:437.3-30: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@140/ipmb0@10:reg: I2C address must be less than 10-bits, got "0x40000010"
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts:521.11-525.4: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@380/ipmb0@10: I2C bus unit address format error, expected "40000010"
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts:523.3-30: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@380/ipmb0@10:reg: I2C address must be less than 10-bits, got "0x40000010"
Caused by commit
a59b1792adf1 ("ARM: dts: aspeed: tiogapass: Add IPMB device")
I have used the aspeed tree from next-20200210 for today.
--
Cheers,
Stephen Rothwell
