- extcon-ptn5150 driver uses gpio libraries - Add GPIOLIB in depends section of Kconfig Error: ----- > CC drivers/extcon/extcon-ptn5150.o > ../drivers/extcon/extcon-ptn5150.c: In function ‘ptn5150_irq_work’: > ../drivers/extcon/extcon-ptn5150.c:130:5: error: implicit declaration of function ‘gpiod_set_value’ [-Werror=implicit-function-declaration] > gpiod_set_value(info->vbus_gpiod, 0); > ^ > ../drivers/extcon/extcon-ptn5150.c: In function ‘ptn5150_i2c_probe’: > ../drivers/extcon/extcon-ptn5150.c:242:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] > info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN); > ^ > ../drivers/extcon/extcon-ptn5150.c:242:53: error: ‘GPIOD_IN’ undeclared (first use in this function) > info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN); > ^ > ../drivers/extcon/extcon-ptn5150.c:242:53: note: each undeclared identifier is reported only once for each function it appears in > ../drivers/extcon/extcon-ptn5150.c:252:2: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] > ret = gpiod_direction_output(info->vbus_gpiod, 0); > ^ > ../drivers/extcon/extcon-ptn5150.c:271:3: error: implicit declaration of function ‘gpiod_to_irq’ [-Werror=implicit-function-declaration] > info->irq = gpiod_to_irq(info->int_gpiod); ----- Signed-off-by: Vijai Kumar K <vijaikumar.kanagarajan@xxxxxxxxx> --- drivers/extcon/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index b9cc027..330dd8b 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -116,7 +116,7 @@ config EXTCON_PALMAS config EXTCON_PTN5150 tristate "NXP PTN5150 CC LOGIC USB EXTCON support" - depends on I2C + depends on I2C && GPIOLIB select REGMAP_I2C help Say Y here to enable support for USB peripheral and USB host -- 2.7.4
