Re: linux-next: manual merge of the pwm tree with the regulator tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 11, 2016 at 11:30:59PM +0200, Thierry Reding wrote:
> On Mon, Jul 11, 2016 at 09:47:34AM -0700, Doug Anderson wrote:
> > Hi,
> > 
> > On Sun, Jul 10, 2016 at 11:56 PM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
> > > Hi Thierry,
> > >
> > > Today's linux-next merge of the pwm tree got a conflict in:
> > >
> > >   drivers/regulator/pwm-regulator.c
> > >
> > > between commit:
> > >
> > >   830583004e61 ("regulator: pwm: Drop unneeded pwm_enable() call")
> > >   27bfa8893b15 ("regulator: pwm: Support for enable GPIO")
> > >   c2588393e631 ("regulator: pwm: Fix regulator ramp delay for continuous mode")
> > >
> > > from the regulator tree and commit:
> > >
> > >   b0303deaa480 ("regulator: pwm: Adjust PWM config at probe time")
> > >   8bd57ca236d0 ("regulator: pwm: Switch to the atomic PWM API")
> > >   25d16595935b ("regulator: pwm: Retrieve correct voltage")
> > >   53f239af4c14 ("regulator: pwm: Support extra continuous mode cases")
> > >
> > > from the pwm tree.
> > >
> > > I fixed it up (I think, please check - see below) and can carry the fix
> > > as necessary. This is now fixed as far as linux-next is concerned, but
> > > any non trivial conflicts should be mentioned to your upstream maintainer
> > > when your tree is submitted for merging.  You may also want to consider
> > > cooperating with the maintainer of the conflicting tree to minimise any
> > > particularly complex conflicts.
> > >
> > > --
> > > Cheers,
> > > Stephen Rothwell
> > 
> > [ cut ]
> > 
> > >  -      /* Delay required by PWM regulator to settle to the new voltage */
> > >  -      usleep_range(ramp_delay, ramp_delay + 1000);
> > >  +      /* Ramp delay is in uV/uS. Adjust to uS and delay */
> > >  +      ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
> > 
> > This was what I was worried about and why I originally sent my patch
> > based upon Boris's series.  The above should be:
> > 
> > ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
> > 
> > Specifically note the use of "req_min_uV" and not "min_uV".
> 
> Okay, so this is something that needs to be fixed up in one of Boris'
> patches? Can you help point out where exactly? The conflict should be
> gone as of tomorrow's linux-next.

Looks like the below should be squashed into commit:

	4585082afab4 regulator: pwm: Support extra continuous mode cases

Can you confirm?

Thierry

--- >8 ---
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 263a2d16d909..c24524242da2 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -237,7 +237,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 		return 0;
 
 	/* Ramp delay is in uV/uS. Adjust to uS and delay */
-	ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
+	ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
 	usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
 
 	return 0;

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Kernel]     [Linux USB Development]     [Yosemite News]     [Linux SCSI]

  Powered by Linux