On 2 June 2016 at 10:02, Pan, Miaoqing <miaoqing@xxxxxxxxxxxxxxxx> wrote:
> Seems there are something wrong in the datasheet, try
>
> --- a/drivers/net/wireless/ath/ath9k/reg.h
> +++ b/drivers/net/wireless/ath/ath9k/reg.h
> @@ -1122,8 +1122,8 @@ enum {
> #define AR9300_NUM_GPIO 16
> #define AR9330_NUM_GPIO 16
> #define AR9340_NUM_GPIO 23
> -#define AR9462_NUM_GPIO 10
> -#define AR9485_NUM_GPIO 12
> +#define AR9462_NUM_GPIO 14
> +#define AR9485_NUM_GPIO 11
> #define AR9531_NUM_GPIO 18
> #define AR9550_NUM_GPIO 24
> #define AR9561_NUM_GPIO 23
> @@ -1139,8 +1139,8 @@ enum {
> #define AR9300_GPIO_MASK 0x0000F4FF
> #define AR9330_GPIO_MASK 0x0000F4FF
> #define AR9340_GPIO_MASK 0x0000000F
> -#define AR9462_GPIO_MASK 0x000003FF
> -#define AR9485_GPIO_MASK 0x00000FFF
> +#define AR9462_GPIO_MASK 0x00003FFF
> +#define AR9485_GPIO_MASK 0x000007FF
> #define AR9531_GPIO_MASK 0x0000000F
> #define AR9550_GPIO_MASK 0x0000000F
> #define AR9561_GPIO_MASK 0x0000000F
>
Thanks, changes in reg.h solve the problem (my card AR9462 rev 01).
BR
Janusz
> Thanks,
> Miaoqing
>
> ________________________________________
> From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
> Sent: Wednesday, June 1, 2016 8:18 PM
> To: Pan, Miaoqing; Kalle Valo
> Cc: Stephen Rothwell; ath9k-devel; linux-next@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-wireless@xxxxxxxxxxxxxxx; ath9k-devel@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; Miaoqing Pan
> Subject: Re: ath9k gpio request
>
> On Wednesday 01 June 2016 04:42 PM, Sudip Mukherjee wrote:
>> On Wednesday 01 June 2016 12:24 PM, Pan, Miaoqing wrote:
>>> which chip ? And what's the GPIO number ?
>>
>> lspci -v reports:
>> 09:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network
>> Adapter (rev 01)
>> Subsystem: Foxconn International, Inc. Device e052
>> Flags: bus master, fast devsel, latency 0, IRQ 19
>> Memory at c0500000 (64-bit, non-prefetchable) [size=512K]
>> Expansion ROM at c0580000 [disabled] [size=64K]
>> Capabilities: [40] Power Management version 2
>> Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
>> Capabilities: [70] Express Endpoint, MSI 00
>> Capabilities: [100] Advanced Error Reporting
>> Capabilities: [140] Virtual Channel
>> Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
>> Kernel driver in use: ath9k
>>
>> Any easy way to find out the gpio number or i can modify the module to
>> find that out.
>
> Its trying for GPIO 11 with label ath9k-rfkill.
>
> The attached dmesg is with some modification as below.
>
> diff --git a/drivers/net/wireless/ath/ath9k/hw.c
> b/drivers/net/wireless/ath/ath9k/hw.c
> index 8b2895f9..23deea7 100644
> --- a/drivers/net/wireless/ath/ath9k/hw.c
> +++ b/drivers/net/wireless/ath/ath9k/hw.c
> @@ -2729,14 +2729,16 @@ static void ath9k_hw_gpio_cfg_wmac(struct ath_hw
> *ah, u32 gpio, bool out,
> static void ath9k_hw_gpio_request(struct ath_hw *ah, u32 gpio, bool out,
> const char *label, u32 ah_signal_type)
> {
> - WARN_ON(gpio >= ah->caps.num_gpio_pins);
> +// WARN_ON(gpio >= ah->caps.num_gpio_pins);
> +
> + pr_err("sudip: %d %s\n", gpio, label);
>
> if (BIT(gpio) & ah->caps.gpio_mask)
> ath9k_hw_gpio_cfg_wmac(ah, gpio, out, ah_signal_type);
> else if (AR_SREV_SOC(ah))
> ath9k_hw_gpio_cfg_soc(ah, gpio, out, label);
> - else
> - WARN_ON(1);
> +// else
> +// WARN_ON(1);
> }
>
> Regards
> Sudip
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
