On 08/31/2015 12:13 PM, Marc Zyngier wrote:
On Mon, 31 Aug 2015 11:57:14 -0700
Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
Hi Marc,
On 08/31/2015 11:26 AM, Marc Zyngier wrote:
[ ... ]
Actually, the kernel dies because of this:
commit adaac459759db4a1fd35baddbe47bac700095496
Author: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
Date: Sun Aug 30 09:33:53 2015 +0200
regmap: Introduce max_raw_read/write for regmap_bulk_read/write
There are some buses which have a limit on the maximum number of
bytes that can be send/received. An example for this is
I2C_FUNC_SMBUS_I2C_BLOCK which does not support any reads/writes of
more than 32 bytes. The regmap_bulk operations should still be able
to utilize the full 32 bytes in this case.
Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
which never considers bus to be NULL in __regmap_init. With the
following patch applied, I can boot to a prompt:
From 031eae5a1b34f952ba3dcaecb4eb4ec9d3bda352 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <marc.zyngier@xxxxxxx>
Date: Mon, 31 Aug 2015 19:16:16 +0100
Subject: [PATCH] regmap: Fix max_raw_read/write handling when bus is NULL
Commit adaac459759d ("regmap: Introduce max_raw_read/write
for regmap_bulk_read/write") added new fields to regmap_bus
and started using them in __regmap_init, but failed to
consider the case where bus would be NULL, like in the
vexpress-syscgf case. The box (actually its qemu version)
ends up dying painfully.
Fix it by testing bus before doing anything else.
Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
Yes, that fixes the vexpress failures.
Tested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
However, I still need to revert your patches to get my realview-pb-a8
and realview-eb tests to work again.
I am a bit concerned about the use of of_address_to_resource(),
which can return an error, leaving cpu_res undefined. Also, if
both CONFIG_OF and CONFIG_ACPI are not configured, supports_deactivate
is set to true by default. This is the configuration used in my
failing tests.
With that in mind, I ran a simple test.
-static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
+static struct static_key supports_deactivate = STATIC_KEY_INIT_FALSE;
Bingo, problem solved. Can you try to find a clean solution ?
Yeah, I just came to the same conclusion, and to the following patch:
From 059bc80a4fc433dda99d75a712f30a77ce4964bc Mon Sep 17 00:00:00 2001
From: Marc Zyngier <marc.zyngier@xxxxxxx>
Date: Mon, 31 Aug 2015 20:00:35 +0100
Subject: [PATCH] irqchip/gic: Fix EOImode settiing non-DT/ACPI systems
Non-DT/ACPI systems call directly into the GIC driver at init time.
Since 0b996fd35957 ("irqchip/GIC: Convert to EOImode == 1"), this
breaks old non firmware-driven platforms, as the driver only
works out the capability of the platform on the DT/ACPI paths.
Fix this thinko by forcing EOImode==0 on non-DT platforms,
which are not capable of supporting a hypervisor anyway.
Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
Yep, that fixes the problem.
Tested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
