On Sat, Apr 04, 2015 at 10:27:30AM -0400, Peter Hurley wrote:
> Restore undocumented behavior of kernel command line parameters of
> the forms:
> console=uart[8250],io|mmio|mmio32,<addr>[,options]
> console=uart[8250],<addr>[,options]
> where 'options' have not been specified; in this case, the hardware
> is assumed to be initialized.
>
> Document the required behavior of the original implementation.
>
> Fixes: c7cef0a84912cab3c9df8 ("console: Add extensible console matching")
> Reported-by: Yinghai Lu <yinghai@xxxxxxxxxx>
> Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
> ---
>
> v3: Fixed automatic console to port line settings initialization;
> open-coded serial8250_console_setup() so the baud can be probed;
> added sha reference in commit log
>
> v2: Fixed regression which allowed "console=uart1337,..." to start a
> console (but not an earlycon)
> + fixed earlycon= documentation related required behavior fixed by
> this patch
>
> Documentation/kernel-parameters.txt | 18 ++++++++++++++---
> drivers/tty/serial/8250/8250_core.c | 38 +++++++++++++++++++++++++++++++++---
> drivers/tty/serial/8250/8250_early.c | 19 ------------------
> 3 files changed, 50 insertions(+), 25 deletions(-)
>
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index bfcb1a6..1facf0b 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -713,10 +713,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>
> uart[8250],io,<addr>[,options]
> uart[8250],mmio,<addr>[,options]
> + uart[8250],mmio32,<addr>[,options]
> + uart[8250],0x<addr>[,options]
> Start an early, polled-mode console on the 8250/16550
> UART at the specified I/O port or MMIO address,
> - switching to the matching ttyS device later. The
> - options are the same as for ttyS, above.
> + switching to the matching ttyS device later.
> + MMIO inter-register address stride is either 8-bit
> + (mmio) or 32-bit (mmio32).
> + If none of [io|mmio|mmio32], <addr> is assumed to be
> + equivalent to 'mmio'. 'options' are specified in the
> + same format described for ttyS above; if unspecified,
> + the h/w is not re-initialized.
> +
> hvc<n> Use the hypervisor console device <n>. This is for
> both Xen and PowerPC hypervisors.
>
> @@ -944,11 +952,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
> uart[8250],io,<addr>[,options]
> uart[8250],mmio,<addr>[,options]
> uart[8250],mmio32,<addr>[,options]
> + uart[8250],0x<addr>[,options]
> Start an early, polled-mode console on the 8250/16550
> UART at the specified I/O port or MMIO address.
> MMIO inter-register address stride is either 8-bit
> (mmio) or 32-bit (mmio32).
> - The options are the same as for ttyS, above.
> + If none of [io|mmio|mmio32], <addr> is assumed to be
> + equivalent to 'mmio'. 'options' are specified in the
> + same format described for "console=ttyS<n>"; if
> + unspecified, the h/w is not initialized.
>
> pl011,<addr>
> Start an early, polled-mode console on a pl011 serial
> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> index e0fb5f0..f59c7a0 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -3447,6 +3447,22 @@ static int univ8250_console_setup(struct console *co, char *options)
> return serial8250_console_setup(up, options);
> }
>
> +/* FIXME: this is broken on most other 8250 h/w */
What do you mean by "most other"? What hardware does this work for?
What is it broken for? What is someone supposed to think/do with this
comment?
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
