On Tue, Jan 14, 2014 at 02:06:57PM -0500, Mikulas Patocka wrote:
> On Tue, 14 Jan 2014, Peter Zijlstra wrote:
> > > Caused by commit 62b94a08da1b ("sched/preempt: Take away
> > > preempt_enable_no_resched() from modules")
Read these two lines, then note that:
> Try adding #include <linux/preempt.h> to speedstep-lib.c. Does it help?
this obviously will not work as preempt_check_resched() and
preempt_enable_no_resched() are no longer available to modules.
> > I think that pm commit is a very good example of why the sched/preempt
> > patch is a very good idea.
> >
> > Also that Changelog fails to explain why enabling interrupts helps. What
> > interrupt is required for progress, and how does it make the progress
> > happen.
>
> There is no explanation. It's hardware issue and I have no documentation
> for the hardware.
Rafael works for Intel, he ought to be able to figure out wtf the
hardware does/needs.
> The general problem is that if there are bus-master transfers running (or
> possibly for other hardware reasons), the CPU refuses to change frequency.
> You can wait a little bit and retry and maybe you succeed changing the
> frequency next time.
>
> If you enable interrupts, wait, disable interrupts and retry, you may
> succeed. If you keep interrupts disabled and retry, you never succeed, no
> matter how long do you wait. I found it experimentally, I don't know
> reason for that.
Sounds like magic goo..
In any case, try the below, it does the same but is far less horrid.
---
drivers/cpufreq/speedstep-smi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 0f5326d6f79f..57d31538c248 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -188,6 +188,7 @@ static void speedstep_set_state(unsigned int state)
return;
/* Disable IRQs */
+ preempt_disable();
local_irq_save(flags);
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
@@ -200,7 +201,9 @@ static void speedstep_set_state(unsigned int state)
if (retry) {
pr_debug("retry %u, previous result %u, waiting...\n",
retry, result);
+ local_irq_restore(flags);
mdelay(retry * 50);
+ local_irq_save(flags);
}
retry++;
__asm__ __volatile__(
@@ -217,6 +220,7 @@ static void speedstep_set_state(unsigned int state)
/* enable IRQs */
local_irq_restore(flags);
+ preempt_enable();
if (new_state == state)
pr_debug("change to %u MHz succeeded after %u tries "
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
