Today's linux-next merge of the tip tree got conflicts in
tools/perf/config/Makefile
tools/perf/config/feature-tests.mak
caused by commits 405ffbd (perf tools: Check libunwind for availability of
dwarf parsing feature) and mostly 308e1e7 (tools/perf/build: Clean up the
libunwind logic in config/Makefile) as well as various follow-up patches.
I fixed it up (see below). Please verify that the resolution looks good.
Also note that this isn't really a trivial resolution of a conflict, but
required modifying various other files. That causes rerere magic not to
work and needs part of conflict to be resolved manually. Perhaps a good
idea would be to rebase Jean's patch on top of the cleanups going on in
the tip tree? Perhaps even carry the patch in the tip tree?
Thanks,
Thierry
---
diff --cc tools/perf/config/Makefile
index 75b93d7,c516d6b..e4d06b2
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@@ -29,13 -29,9 +29,13 @@@ ifeq ($(ARCH),x86_64
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
endif
+ifeq ($(ARCH),arm)
+ NO_PERF_REGS := 0
+ LIBUNWIND_LIBS = -lunwind -lunwind-arm
+endif
ifeq ($(NO_PERF_REGS),0)
- CFLAGS += -DHAVE_PERF_REGS
+ CFLAGS += -DHAVE_PERF_REGS_SUPPORT
endif
ifeq ($(src-perf),)
@@@ -93,20 -85,125 +89,126 @@@ CFLAGS += -std=gnu9
EXTLIBS = -lelf -lpthread -lrt -lm -ldl
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -fstack-protector-all,-fstack-protector-all),y)
- CFLAGS += -fstack-protector-all
+ ifneq ($(OUTPUT),)
+ OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
+ $(shell mkdir -p $(OUTPUT_FEATURES))
endif
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wstack-protector,-Wstack-protector),y)
- CFLAGS += -Wstack-protector
+ feature_check = $(eval $(feature_check_code))
+ define feature_check_code
+ feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) LDFLAGS=$(LDFLAGS) -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
+ endef
+
+ feature_set = $(eval $(feature_set_code))
+ define feature_set_code
+ feature-$(1) := 1
+ endef
+
+ #
+ # Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
+ #
+
+ #
+ # Note that this is not a complete list of all feature tests, just
+ # those that are typically built on a fully configured system.
+ #
+ # [ Feature tests not mentioned here have to be built explicitly in
+ # the rule that uses them - an example for that is the 'bionic'
+ # feature check. ]
+ #
+ CORE_FEATURE_TESTS = \
+ backtrace \
+ dwarf \
+ fortify-source \
+ glibc \
+ gtk2 \
+ gtk2-infobar \
+ libaudit \
+ libbfd \
+ libelf \
+ libelf-getphdrnum \
+ libelf-mmap \
+ libnuma \
+ libperl \
+ libpython \
+ libpython-version \
+ libslang \
+ libunwind \
++ libunwind-debug-frame \
+ on-exit \
+ stackprotector \
+ stackprotector-all
+
+ #
+ # So here we detect whether test-all was rebuilt, to be able
+ # to skip the print-out of the long features list if the file
+ # existed before and after it was built:
+ #
+ ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
+ test-all-failed := 1
+ else
+ test-all-failed := 0
+ endif
+
+ #
+ # Special fast-path for the 'all features are available' case:
+ #
+ $(call feature_check,all,$(MSG))
+
+ #
+ # Just in case the build freshly failed, make sure we print the
+ # feature matrix:
+ #
+ ifeq ($(feature-all), 0)
+ test-all-failed := 1
+ endif
+
+ ifeq ($(test-all-failed),1)
+ $(info )
+ $(info Auto-detecting system features:)
+ endif
+
+ ifeq ($(feature-all), 1)
+ #
+ # test-all.c passed - just set all the core feature flags to 1:
+ #
+ $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
+ else
+ $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
+ $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
+ endif
+
+ #
+ # Print the result of the feature test:
+ #
+ feature_print = $(eval $(feature_print_code)) $(info $(MSG))
+
+ define feature_print_code
+ ifeq ($(feature-$(1)), 1)
+ MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
+ else
+ MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
+ endif
+ endef
+
+ #
+ # Only print out our features if we rebuilt the testcases or if a test failed:
+ #
+ ifeq ($(test-all-failed), 1)
+ $(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_print,$(feat)))
+ $(info )
endif
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wvolatile-register-var,-Wvolatile-register-var),y)
- CFLAGS += -Wvolatile-register-var
+ ifeq ($(feature-stackprotector-all), 1)
+ CFLAGS += -fstack-protector-all
+ endif
+
+ ifeq ($(feature-stackprotector), 1)
+ CFLAGS += -Wstack-protector
endif
- ifndef PERF_DEBUG
- ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -D_FORTIFY_SOURCE=2,-D_FORTIFY_SOURCE=2),y)
+ ifeq ($(DEBUG),0)
+ ifeq ($(feature-fortify-source), 1)
CFLAGS += -D_FORTIFY_SOURCE=2
endif
endif
@@@ -179,64 -274,55 +279,59 @@@ els
endif # NO_LIBELF
ifndef NO_LIBELF
- CFLAGS += -DLIBELF_SUPPORT
- FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
- ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
- CFLAGS += -DLIBELF_MMAP
- endif
- ifeq ($(call try-cc,$(SOURCE_ELF_GETPHDRNUM),$(FLAGS_LIBELF),-DHAVE_ELF_GETPHDRNUM),y)
- CFLAGS += -DHAVE_ELF_GETPHDRNUM
- endif
+ CFLAGS += -DHAVE_LIBELF_SUPPORT
- # include ARCH specific config
- -include $(src-perf)/arch/$(ARCH)/Makefile
+ ifeq ($(feature-libelf-mmap), 1)
+ CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
+ endif
- ifndef NO_DWARF
- ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
- msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
- NO_DWARF := 1
- else
- CFLAGS += -DDWARF_SUPPORT $(LIBDW_CFLAGS)
- LDFLAGS += $(LIBDW_LDFLAGS)
- EXTLIBS += -lelf -ldw
- endif # PERF_HAVE_DWARF_REGS
- endif # NO_DWARF
+ ifeq ($(feature-libelf-getphdrnum), 1)
+ CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
+ endif
- endif # NO_LIBELF
+ # include ARCH specific config
+ -include $(src-perf)/arch/$(ARCH)/Makefile
- ifndef NO_LIBELF
- CFLAGS += -DLIBELF_SUPPORT
- FLAGS_LIBELF=$(CFLAGS) $(LDFLAGS) $(EXTLIBS)
- ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
- CFLAGS += -DLIBELF_MMAP
- endif # try-cc
+ ifndef NO_DWARF
+ ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
+ msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+ NO_DWARF := 1
+ else
+ CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
+ LDFLAGS += $(LIBDW_LDFLAGS)
+ EXTLIBS += -lelf -ldw
+ endif # PERF_HAVE_DWARF_REGS
+ endif # NO_DWARF
endif # NO_LIBELF
-# There's only x86 (both 32 and 64) support for CFI unwind so far
-ifneq ($(ARCH),x86)
+ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
endif
ifndef NO_LIBUNWIND
- # for linking with debug library, run like:
- # make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
- ifdef LIBUNWIND_DIR
- LIBUNWIND_CFLAGS := -I$(LIBUNWIND_DIR)/include
- LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
- endif
+ #
+ # For linking with debug library, run like:
+ #
+ # make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
+ #
+ ifdef LIBUNWIND_DIR
+ LIBUNWIND_CFLAGS := -I$(LIBUNWIND_DIR)/include
+ LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
+ endif
- FLAGS_UNWIND=$(LIBUNWIND_CFLAGS) $(CFLAGS) $(LIBUNWIND_LDFLAGS) $(LDFLAGS) $(EXTLIBS) $(LIBUNWIND_LIBS)
- ifneq ($(call try-cc,$(SOURCE_LIBUNWIND),$(FLAGS_UNWIND),libunwind),y)
- msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1);
- NO_LIBUNWIND := 1
- endif # Libunwind support
- ifneq ($(call try-cc,$(SOURCE_LIBUNWIND_DEBUG_FRAME),$(FLAGS_UNWIND),libunwind debug_frame),y)
- msg := $(warning No debug_frame support found in libunwind);
- CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
- endif # debug_frame support in libunwind
- endif # NO_LIBUNWIND
+ ifneq ($(feature-libunwind), 1)
- msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99);
++ msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1);
+ NO_LIBUNWIND := 1
++ else
++ ifneq ($(feature-libunwind-debug-frame), 1)
++ msg := $(warning No debug_frame support found in libunwind);
++ CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
++ endif
+ endif
+ endif
ifndef NO_LIBUNWIND
- CFLAGS += -DLIBUNWIND_SUPPORT
+ CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
EXTLIBS += $(LIBUNWIND_LIBS)
CFLAGS += $(LIBUNWIND_CFLAGS)
LDFLAGS += $(LIBUNWIND_LDFLAGS)
diff --cc tools/perf/config/feature-checks/Makefile
index 0000000,452b67c..abaf8f4
mode 000000,100644..100644
--- a/tools/perf/config/feature-checks/Makefile
+++ b/tools/perf/config/feature-checks/Makefile
@@@ -1,0 -1,144 +1,148 @@@
+
+ FILES= \
+ test-all \
+ test-backtrace \
+ test-bionic \
+ test-dwarf \
+ test-fortify-source \
+ test-glibc \
+ test-gtk2 \
+ test-gtk2-infobar \
+ test-hello \
+ test-libaudit \
+ test-libbfd \
+ test-liberty \
+ test-liberty-z \
+ test-cplus-demangle \
+ test-libelf \
+ test-libelf-getphdrnum \
+ test-libelf-mmap \
+ test-libnuma \
+ test-libperl \
+ test-libpython \
+ test-libpython-version \
+ test-libslang \
+ test-libunwind \
++ test-libunwind-debug-frame \
+ test-on-exit \
+ test-stackprotector-all \
+ test-stackprotector
+
+ CC := $(CC) -MD
+
+ all: $(FILES)
+
+ BUILD = $(CC) $(LDFLAGS) -o $(OUTPUT)$@ $@.c
+
+ ###############################
+
+ test-all:
+ $(BUILD) -Werror -fstack-protector -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lunwind -lunwind-x86_64 -lelf -laudit -I/usr/include/slang -lslang $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl
+
+ test-hello:
+ $(BUILD)
+
+ test-stackprotector-all:
+ $(BUILD) -Werror -fstack-protector-all
+
+ test-stackprotector:
+ $(BUILD) -Werror -fstack-protector -Wstack-protector
+
+ test-fortify-source:
+ $(BUILD) -O2 -Werror -D_FORTIFY_SOURCE=2
+
+ test-bionic:
+ $(BUILD)
+
+ test-libelf:
+ $(BUILD) -lelf
+
+ test-glibc:
+ $(BUILD)
+
+ test-dwarf:
+ $(BUILD) -ldw
+
+ test-libelf-mmap:
+ $(BUILD) -lelf
+
+ test-libelf-getphdrnum:
+ $(BUILD) -lelf
+
+ test-libnuma:
+ $(BUILD) -lnuma
+
+ test-libunwind:
+ $(BUILD) -lunwind -lunwind-x86_64 -lelf
+
++test-libunwind-debug-frame:
++ $(BUILD) -lunwind -lunwind-x86_64 -lelf
++
+ test-libaudit:
+ $(BUILD) -laudit
+
+ test-libslang:
+ $(BUILD) -I/usr/include/slang -lslang
+
+ test-gtk2:
+ $(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+
+ test-gtk2-infobar:
+ $(BUILD) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
+
+ grep-libs = $(filter -l%,$(1))
+ strip-libs = $(filter-out -l%,$(1))
+
+ PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
+ PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
+ PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
+ PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+ FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
+
+ test-libperl:
+ $(BUILD) $(FLAGS_PERL_EMBED)
+
+ override PYTHON := python
+ override PYTHON_CONFIG := python-config
+
+ escape-for-shell-sq = $(subst ','\'',$(1))
+ shell-sq = '$(escape-for-shell-sq)'
+
+ PYTHON_CONFIG_SQ = $(call shell-sq,$(PYTHON_CONFIG))
+
+ PYTHON_EMBED_LDOPTS = $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+ PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
+ PYTHON_EMBED_CCOPTS = $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+ FLAGS_PYTHON_EMBED = $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+
+ test-libpython:
+ $(BUILD) $(FLAGS_PYTHON_EMBED)
+
+ test-libpython-version:
+ $(BUILD) $(FLAGS_PYTHON_EMBED)
+
+ test-libbfd:
+ $(BUILD) -DPACKAGE='"perf"' -lbfd -ldl
+
+ test-liberty:
+ $(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty
+
+ test-liberty-z:
+ $(CC) -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' -lbfd -ldl -liberty -lz
+
+ test-cplus-demangle:
+ $(BUILD) -liberty
+
+ test-on-exit:
+ $(BUILD)
+
+ test-backtrace:
+ $(BUILD)
+
+ -include *.d
+
+ ###############################
+
+ clean:
+ rm -f $(FILES) *.d
diff --cc tools/perf/config/feature-checks/test-all.c
index 0000000,50d4318..ed8aa7b
mode 000000,100644..100644
--- a/tools/perf/config/feature-checks/test-all.c
+++ b/tools/perf/config/feature-checks/test-all.c
@@@ -1,0 -1,106 +1,111 @@@
+ /*
+ * test-all.c: Try to build all the main testcases at once.
+ *
+ * A well-configured system will have all the prereqs installed, so we can speed
+ * up auto-detection on such systems.
+ */
+
+ /*
+ * Quirk: Python and Perl headers cannot be in arbitrary places, so keep
+ * these 3 testcases at the top:
+ */
+ #define main main_test_libpython
+ # include "test-libpython.c"
+ #undef main
+
+ #define main main_test_libpython_version
+ # include "test-libpython-version.c"
+ #undef main
+
+ #define main main_test_libperl
+ # include "test-libperl.c"
+ #undef main
+
+ #define main main_test_hello
+ # include "test-hello.c"
+ #undef main
+
+ #define main main_test_libelf
+ # include "test-libelf.c"
+ #undef main
+
+ #define main main_test_libelf_mmap
+ # include "test-libelf-mmap.c"
+ #undef main
+
+ #define main main_test_glibc
+ # include "test-glibc.c"
+ #undef main
+
+ #define main main_test_dwarf
+ # include "test-dwarf.c"
+ #undef main
+
+ #define main main_test_libelf_getphdrnum
+ # include "test-libelf-getphdrnum.c"
+ #undef main
+
+ #define main main_test_libunwind
+ # include "test-libunwind.c"
+ #undef main
+
++#define main main_test_libunwind_debug_frame
++# include "test-libunwind-debug-frame.c"
++#undef main
++
+ #define main main_test_libaudit
+ # include "test-libaudit.c"
+ #undef main
+
+ #define main main_test_libslang
+ # include "test-libslang.c"
+ #undef main
+
+ #define main main_test_gtk2
+ # include "test-gtk2.c"
+ #undef main
+
+ #define main main_test_gtk2_infobar
+ # include "test-gtk2-infobar.c"
+ #undef main
+
+ #define main main_test_libbfd
+ # include "test-libbfd.c"
+ #undef main
+
+ #define main main_test_on_exit
+ # include "test-on-exit.c"
+ #undef main
+
+ #define main main_test_backtrace
+ # include "test-backtrace.c"
+ #undef main
+
+ #define main main_test_libnuma
+ # include "test-libnuma.c"
+ #undef main
+
+ int main(int argc, char *argv[])
+ {
+ main_test_libpython();
+ main_test_libpython_version();
+ main_test_libperl();
+ main_test_hello();
+ main_test_libelf();
+ main_test_libelf_mmap();
+ main_test_glibc();
+ main_test_dwarf();
+ main_test_libelf_getphdrnum();
+ main_test_libunwind();
++ main_test_libunwind_debug_frame();
+ main_test_libaudit();
+ main_test_libslang();
+ main_test_gtk2(argc, argv);
+ main_test_gtk2_infobar(argc, argv);
+ main_test_libbfd();
+ main_test_on_exit();
+ main_test_backtrace();
+ main_test_libnuma();
+
+ return 0;
+ }
diff --cc tools/perf/config/feature-checks/test-libunwind-debug-frame.c
index 0000000,0000000..0ef8087
new file mode 100644
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libunwind-debug-frame.c
@@@ -1,0 -1,0 +1,16 @@@
++#include <libunwind.h>
++#include <stdlib.h>
++
++extern int
++UNW_OBJ(dwarf_find_debug_frame) (int found, unw_dyn_info_t *di_debug,
++ unw_word_t ip, unw_word_t segbase,
++ const char *obj_name, unw_word_t start,
++ unw_word_t end);
++
++#define dwarf_find_debug_frame UNW_OBJ(dwarf_find_debug_frame)
++
++int main(void)
++{
++ dwarf_find_debug_frame(0, NULL, 0, 0, NULL, 0, 0);
++ return 0;
++}
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
