Today's linux-next merge of the mvebu tree got conflicts in
arch/arm/mach-dove/board-dt.c
arch/arm/mach-kirkwood/board-dt.c
caused by commits ebd7d3a (ARM: kirkwood: retain MAC address for DT
ethernet), 511aaab (ARM: kirkwood: Remove unneeded MBus initialization)
and a169e3a (ARM: kirkwood: remove custom .init_time hook) as well as
ccbd35c (ARM: dove: remove legacy pcie and clock init), e5901b5 (ARM:
dove: switch to DT probed mbus address windows) and 51e40f5 (ARM: dove:
remove custom .init_time hook).
I fixed them up (see below). Please verify that the resolution looks
good.
Thanks,
Thierry
---
diff --cc arch/arm/mach-dove/board-dt.c
index ddb8663,9a116d7..49fa9ab
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@@ -17,37 -20,15 +17,8 @@@
#include <mach/dove.h>
#include <mach/pm.h>
#include <plat/common.h>
-#include <plat/irq.h>
#include "common.h"
- /*
- * There are still devices that doesn't even know about DT,
- * get clock gates here and add a clock lookup.
- */
- static void __init dove_legacy_clk_init(void)
- {
- struct device_node *np = of_find_compatible_node(NULL, NULL,
- "marvell,dove-gating-clock");
- struct of_phandle_args clkspec;
-
- clkspec.np = np;
- clkspec.args_count = 1;
-
- clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
- orion_clkdev_add("0", "pcie",
- of_clk_get_from_provider(&clkspec));
-
- clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
- orion_clkdev_add("1", "pcie",
- of_clk_get_from_provider(&clkspec));
- }
-
- static void __init dove_dt_init_early(void)
-static void __init dove_dt_time_init(void)
--{
- mvebu_mbus_init("marvell,dove-mbus",
- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
- DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
- of_clk_init(NULL);
- clocksource_of_init();
--}
--
static void __init dove_dt_init(void)
{
pr_info("Dove 88AP510 SoC\n");
@@@ -73,7 -47,7 +37,6 @@@ static const char * const dove_dt_board
DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
.map_io = dove_map_io,
- .init_early = dove_dt_init_early,
- .init_time = dove_dt_time_init,
.init_machine = dove_dt_init,
.restart = dove_restart,
.dt_compat = dove_dt_board_compat,
diff --cc arch/arm/mach-kirkwood/board-dt.c
index a32a3e5,2ac2a3f..9caa4fe
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@@ -13,8 -13,11 +13,10 @@@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
+ #include <linux/of_address.h>
+ #include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
#include <linux/kexec.h>
@@@ -65,13 -60,91 +59,85 @@@ static void __init kirkwood_legacy_clk_
clk_prepare_enable(clk);
}
- static void __init kirkwood_dt_init_early(void)
+ #define MV643XX_ETH_MAC_ADDR_LOW 0x0414
+ #define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
+
+ static void __init kirkwood_dt_eth_fixup(void)
{
- mvebu_mbus_init("marvell,kirkwood-mbus",
- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
+ struct device_node *np;
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by u-boot
+ * if the clocks are turned off. Usually, u-boot on kirkwood boards
+ * has no DT support to properly set local-mac-address property.
+ * As a workaround, we get the MAC address from mv643xx_eth registers
+ * and update the port device node if no valid MAC address is set.
+ */
+ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+ struct device_node *pnp = of_get_parent(np);
+ struct clk *clk;
+ struct property *pmac;
+ void __iomem *io;
+ u8 *macaddr;
+ u32 reg;
+
+ if (!pnp)
+ continue;
+
+ /* skip disabled nodes or nodes with valid MAC address*/
+ if (!of_device_is_available(pnp) || of_get_mac_address(np))
+ goto eth_fixup_skip;
+
+ clk = of_clk_get(pnp, 0);
+ if (IS_ERR(clk))
+ goto eth_fixup_skip;
+
+ io = of_iomap(pnp, 0);
+ if (!io)
+ goto eth_fixup_no_map;
+
+ /* ensure port clock is not gated to not hang CPU */
+ clk_prepare_enable(clk);
+
+ /* store MAC address register contents in local-mac-address */
+ pr_err(FW_INFO "%s: local-mac-address is not set\n",
+ np->full_name);
+
+ pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+ if (!pmac)
+ goto eth_fixup_no_mem;
+
+ pmac->value = pmac + 1;
+ pmac->length = 6;
+ pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!pmac->name) {
+ kfree(pmac);
+ goto eth_fixup_no_mem;
+ }
+
+ macaddr = pmac->value;
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+ macaddr[0] = (reg >> 24) & 0xff;
+ macaddr[1] = (reg >> 16) & 0xff;
+ macaddr[2] = (reg >> 8) & 0xff;
+ macaddr[3] = reg & 0xff;
+
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+ macaddr[4] = (reg >> 8) & 0xff;
+ macaddr[5] = reg & 0xff;
+
+ of_update_property(np, pmac);
+
+ eth_fixup_no_mem:
+ iounmap(io);
+ clk_disable_unprepare(clk);
+ eth_fixup_no_map:
+ clk_put(clk);
+ eth_fixup_skip:
+ of_node_put(pnp);
+ }
}
-static void __init kirkwood_dt_time_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
-}
-
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
@@@ -114,7 -187,7 +180,6 @@@ static const char * const kirkwood_dt_b
DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@xxxxxxxxxxxxxx> */
.map_io = kirkwood_map_io,
- .init_early = kirkwood_dt_init_early,
- .init_time = kirkwood_dt_time_init,
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
.dt_compat = kirkwood_dt_board_compat,
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
