>
> On Wed, 2011-07-27 at 12:08 +1000, Stephen Rothwell wrote:
> > Hi Vinod,
> >
> > Today's linux-next merge of the slave-dma tree got a conflict in
> > drivers/spi/spi-pl022.c (called drivers/spi/amba-pl022.c in the sleav-dma
> > tree) between commit 083be3f05371 ("spi/pl022: initialize burstsize from
> > FIFO trigger level") from Linus' tree and commit 001b0585ff16 ("Improve
> > slave/cyclic DMA engine documentation") from the slave-dma tree.
> >
> > I fixed it up (see below) anc acn carry the fix as necessary.
>
> The correct fix would be:
>
> diff --cc drivers/spi/spi-pl022.c
> index eba88c7,99e7880..0000000
> --- a/drivers/spi/spi-pl022.c
> +++ b/drivers/spi/spi-pl022.c
> @@@ -910,11 -908,11 +910,9 @@@ static int configure_dma(struct pl022 *
> {
> struct dma_slave_config rx_conf = {
> .src_addr = SSP_DR(pl022->phybase),
> + .direction = DMA_TO_DEVICE,
> };
> struct dma_slave_config tx_conf = {
> .dst_addr = SSP_DR(pl022->phybase),
> .direction = DMA_TO_DEVICE,
> - .dst_maxburst = pl022->vendor->fifodepth >> 1,
> };
> unsigned int pages;
> int ret;
>
Grant, Russell,
Can you please ack this fix before I apply in my tree to resolve this conflict
~Vinod
��.n��������+%������w��{.n�����{��w����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
