On Sat, Mar 26, 2011 at 09:11:29AM +0100, Sedat Dilek wrote: > On Sat, Mar 26, 2011 at 4:42 AM, Paul E. McKenney > <paulmck@xxxxxxxxxxxxxxxxxx> wrote: > > On Fri, Mar 25, 2011 at 08:42:14PM +0100, Sedat Dilek wrote: > >> On Fri, Mar 25, 2011 at 6:48 PM, Paul E. McKenney > >> <paulmck@xxxxxxxxxxxxxxxxxx> wrote: > >> > On Fri, Mar 25, 2011 at 06:40:38PM +0100, Sedat Dilek wrote: > >> >> On Fri, Mar 25, 2011 at 5:51 PM, Sedat Dilek <sedat.dilek@xxxxxxxxxxxxxx> wrote: > >> >> > On Fri, Mar 25, 2011 at 5:42 PM, Paul E. McKenney > >> >> > <paulmck@xxxxxxxxxxxxxxxxxx> wrote: > >> >> >> On Fri, Mar 25, 2011 at 08:55:16AM -0700, Josh Triplett wrote: > >> >> >>> On Fri, Mar 25, 2011 at 02:05:33PM +0100, Sedat Dilek wrote: > >> >> >>> > On Fri, Mar 25, 2011 at 11:16 AM, Sedat Dilek > >> >> >>> > <sedat.dilek@xxxxxxxxxxxxxx> wrote: > >> >> >>> > > right after I have finished building a new linux-next kernel, booting > >> >> >>> > > into desktop and archiving my build-tree (ext4) as tarball to an > >> >> >>> > > external USB harddisk (partition there is ext3). > >> >> >>> > > ( Yesterday, I have seen similiar call-traces in my logs, but it was > >> >> >>> > > hard to reproduce [1]. ) > >> >> >>> > > I am unsure from where the problem aroses, if you have a hint, let me know. > >> >> >>> > > > >> >> >>> > > Regards, > >> >> >>> > > - Sedat - > >> >> >>> > > > >> >> >>> > > [1] http://lkml.org/lkml/2011/3/24/268 > >> >> >>> > > > >> >> >>> > > P.S.: Attached are the dmesg outputs and my kernel-config > >> >> >>> > > > >> >> >>> > > >> >> >>> > I turned off the notebook for about 2hrs to avoid thermal problems and > >> >> >>> > hoax reports. > >> >> >>> > Jumped into desktop and started an archive job as 1st job while doing daily job. > >> >> >>> > Yeah, it is reproducible. > >> >> >>> [...] > >> >> >>> > [ 212.453822] EXT3-fs (sdb5): mounted filesystem with ordered data mode > >> >> >>> > [ 273.224044] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies) > >> >> >>> > >> >> >>> 15000 jiffies matches this 60-second gap, assuming you use HZ=250. > >> >> >>> > >> >> >>> > [ 273.224059] sending NMI to all CPUs: > >> >> >>> > [ 273.224074] NMI backtrace for cpu 0 > >> >> >>> > [ 273.224081] Modules linked in: ext3 jbd bnep rfcomm bluetooth aes_i586 aes_generic binfmt_misc ppdev acpi_cpufreq mperf cpufreq_powersave cpufreq_userspace lp cpufreq_stats cpufreq_conservative fuse snd_intel8x0 snd_intel8x0m snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm radeon thinkpad_acpi snd_seq_midi pcmcia ttm snd_rawmidi snd_seq_midi_event drm_kms_helper yenta_socket snd_seq pcmcia_rsrc drm pcmcia_core joydev snd_timer snd_seq_device snd i2c_algo_bit tpm_tis shpchp i2c_i801 tpm nsc_ircc irda snd_page_alloc soundcore pci_hotplug rng_core i2c_core tpm_bios psmouse crc_ccitt nvram parport_pc pcspkr parport evdev battery video ac processor power_supply serio_raw button arc4 ecb ath5k ath mac80211 cfg80211 rfkill autofs4 ext4 mbcache jbd2 crc16 dm_mod usbhid hid usb_storage uas sg sd_mod sr_mod crc_t10dif cdrom ata_generic ata_piix libata uhci_hcd ehci_hcd usbcore scsi_mod thermal e1000 thermal_sys floppy [last unloaded: scsi_wait_scan] > >> >> >>> > [ 273.224367] > >> >> >>> > [ 273.224377] Pid: 0, comm: swapper Not tainted 2.6.38-next20110325-2-686-iniza #1 IBM 2374SG6/2374SG6 > >> >> >>> > [ 273.224397] EIP: 0060:[<c11514f0>] EFLAGS: 00000807 CPU: 0 > >> >> >>> > [ 273.224414] EIP is at delay_tsc+0x16/0x5e > >> >> >>> > [ 273.224424] EAX: 00090d42 EBX: 00002710 ECX: c133faf5 EDX: 00090d41 > >> >> >>> > [ 273.224435] ESI: 00000000 EDI: 00090d42 EBP: f5819e9c ESP: f5819e8c > >> >> >>> > [ 273.224445] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > >> >> >>> > [ 273.224458] Process swapper (pid: 0, ti=f5818000 task=c13e3fa0 task.ti=c13b6000) > >> >> >>> > [ 273.224466] Stack: > >> >> >>> > [ 273.224472] 00090d41 00002710 c13ee580 c13ee600 f5819ea4 c115149f f5819eac c11514bb > >> >> >>> > [ 273.224497] f5819eb8 c1016532 c13ee580 f5819ed4 c1078dc1 c134e61e c134e6c2 00000000 > >> >> >>> > [ 273.224520] 00003a98 f5c03488 f5819ee8 c1078e36 00000000 00000000 c13e3fa0 f5819ef4 > >> >> >>> > [ 273.224544] Call Trace: > >> >> >>> > [ 273.224559] [<c115149f>] __delay+0x9/0xb > >> >> >>> > [ 273.224571] [<c11514bb>] __const_udelay+0x1a/0x1c > >> >> >>> > [ 273.224590] [<c1016532>] arch_trigger_all_cpu_backtrace+0x50/0x62 > >> >> >>> > [ 273.224608] [<c1078dc1>] check_cpu_stall+0x58/0xb8 > >> >> >>> > [ 273.224622] [<c1078e36>] __rcu_pending+0x15/0xc4 > >> >> >>> > [ 273.224637] [<c10791df>] rcu_check_callbacks+0x6d/0x93 > >> >> >>> > [ 273.224652] [<c1039c6c>] update_process_times+0x2d/0x58 > >> >> >>> > [ 273.224666] [<c10509e9>] tick_sched_timer+0x6b/0x9a > >> >> >>> > [ 273.224682] [<c1047196>] __run_hrtimer+0x9c/0x111 > >> >> >>> > [ 273.224694] [<c105097e>] ? tick_sched_timer+0x0/0x9a > >> >> >>> > [ 273.224708] [<c1047b38>] hrtimer_interrupt+0xd6/0x1bb > >> >> >>> > [ 273.224727] [<c104fca1>] tick_do_broadcast.constprop.4+0x38/0x6a > >> >> >>> > [ 273.224741] [<c104fd80>] tick_handle_oneshot_broadcast+0xad/0xe1 > >> >> >>> > [ 273.224757] [<c1076cc2>] ? handle_level_irq+0x0/0x63 > >> >> >>> > [ 273.224772] [<c1004215>] timer_interrupt+0x15/0x1c > >> >> >>> > [ 273.224785] [<c107536d>] handle_irq_event_percpu+0x4e/0x164 > >> >> >>> > [ 273.224799] [<c1076cc2>] ? handle_level_irq+0x0/0x63 > >> >> >>> > [ 273.224811] [<c10754b9>] handle_irq_event+0x36/0x51 > >> >> >>> > [ 273.224824] [<c1076cc2>] ? handle_level_irq+0x0/0x63 > >> >> >>> > [ 273.224837] [<c1076d0f>] handle_level_irq+0x4d/0x63 > >> >> >>> > [ 273.224845] <IRQ> > >> >> >>> > [ 273.224857] [<c1003b8d>] ? do_IRQ+0x35/0x80 > >> >> >>> > [ 273.224871] [<c12ac0f0>] ? common_interrupt+0x30/0x38 > >> >> >>> > [ 273.224886] [<c10400d8>] ? destroy_worker+0x52/0x6c > >> >> >>> > [ 273.224922] [<f87b730f>] ? arch_local_irq_enable+0x5/0xb [processor] > >> >> >>> > [ 273.224947] [<f87b7ef5>] ? acpi_idle_enter_simple+0x100/0x138 [processor] > >> >> >>> > [ 273.224964] [<c11ebd92>] ? cpuidle_idle_call+0xc2/0x137 > >> >> >>> > [ 273.224978] [<c1001da3>] ? cpu_idle+0x89/0xa3 > >> >> >>> > [ 273.224995] [<c128c26c>] ? rest_init+0x58/0x5a > >> >> >>> > [ 273.225008] [<c1418722>] ? start_kernel+0x315/0x31a > >> >> >>> > [ 273.225022] [<c14180a2>] ? i386_start_kernel+0xa2/0xaa > >> >> >>> > [ 273.225029] Code: e5 e8 d6 ff ff ff 5d c3 55 89 e5 8d 04 80 e8 c9 ff ff ff 5d c3 55 89 e5 57 89 c7 56 53 52 64 8b 35 04 20 47 c1 8d 76 00 0f ae e8 <e8> 6b ff ff ff 89 c3 8d 76 00 0f ae e8 e8 5e ff ff ff 89 c2 29 > >> >> >>> > [ 273.225154] Call Trace: > >> >> >>> > [ 273.225166] [<c115149f>] __delay+0x9/0xb > >> >> >>> > [ 273.225178] [<c11514bb>] __const_udelay+0x1a/0x1c > >> >> >>> > [ 273.225192] [<c1016532>] arch_trigger_all_cpu_backtrace+0x50/0x62 > >> >> >>> > [ 273.225207] [<c1078dc1>] check_cpu_stall+0x58/0xb8 > >> >> >>> > [ 273.225220] [<c1078e36>] __rcu_pending+0x15/0xc4 > >> >> >>> > [ 273.225234] [<c10791df>] rcu_check_callbacks+0x6d/0x93 > >> >> >>> > [ 273.225247] [<c1039c6c>] update_process_times+0x2d/0x58 > >> >> >>> > [ 273.225260] [<c10509e9>] tick_sched_timer+0x6b/0x9a > >> >> >>> > [ 273.225274] [<c1047196>] __run_hrtimer+0x9c/0x111 > >> >> >>> > [ 273.225286] [<c105097e>] ? tick_sched_timer+0x0/0x9a > >> >> >>> > [ 273.225300] [<c1047b38>] hrtimer_interrupt+0xd6/0x1bb > >> >> >>> > [ 273.225316] [<c104fca1>] tick_do_broadcast.constprop.4+0x38/0x6a > >> >> >>> > [ 273.225330] [<c104fd80>] tick_handle_oneshot_broadcast+0xad/0xe1 > >> >> >>> > [ 273.225345] [<c1076cc2>] ? handle_level_irq+0x0/0x63 > >> >> >>> > [ 273.225358] [<c1004215>] timer_interrupt+0x15/0x1c > >> >> >>> > [ 273.225370] [<c107536d>] handle_irq_event_percpu+0x4e/0x164 > >> >> >>> > [ 273.225384] [<c1076cc2>] ? handle_level_irq+0x0/0x63 > >> >> >>> > [ 273.225396] [<c10754b9>] handle_irq_event+0x36/0x51 > >> >> >>> > [ 273.225409] [<c1076cc2>] ? handle_level_irq+0x0/0x63 > >> >> >>> > [ 273.225421] [<c1076d0f>] handle_level_irq+0x4d/0x63 > >> >> >>> > [ 273.225429] <IRQ> [<c1003b8d>] ? do_IRQ+0x35/0x80 > >> >> >>> > [ 273.225450] [<c12ac0f0>] ? common_interrupt+0x30/0x38 > >> >> >>> > [ 273.225464] [<c10400d8>] ? destroy_worker+0x52/0x6c > >> >> >>> > [ 273.225493] [<f87b730f>] ? arch_local_irq_enable+0x5/0xb [processor] > >> >> >>> > [ 273.225517] [<f87b7ef5>] ? acpi_idle_enter_simple+0x100/0x138 [processor] > >> >> >>> > [ 273.225532] [<c11ebd92>] ? cpuidle_idle_call+0xc2/0x137 > >> >> >>> > [ 273.225545] [<c1001da3>] ? cpu_idle+0x89/0xa3 > >> >> >>> > [ 273.225559] [<c128c26c>] ? rest_init+0x58/0x5a > >> >> >>> > [ 273.225571] [<c1418722>] ? start_kernel+0x315/0x31a > >> >> >>> > [ 273.225584] [<c14180a2>] ? i386_start_kernel+0xa2/0xaa > >> >> >>> > >> >> >>> Interesting. Looks like RCU detected a stall while the CPU sits in > >> >> >>> cpu_idle. That *shouldn't* happen... > >> >> >> > >> >> >> There have been a few of these things recently that turned out to > >> >> >> be BIOS misconfigurations, though that would not be the first thing > >> >> >> I would suspect if the system had run other versions successfully. > >> >> >> Another possibility is that the CPU spent the full time in interrupt. > >> >> >> Get an interrupt from the idle loop, stay in interrupt for 60 seconds, > >> >> >> get an RCU CPU stall warning. > >> >> >> > >> >> >> Or I could have somehow inserted a bug in RCU. But I am not seeing > >> >> >> this in my testing. > >> >> >> > >> >> >> Thanx, Paul > >> >> >> > >> >> > > >> >> > The problems started when I first saw CONFIG_RCU_CPU_STALL_TIMEOUT=60 > >> >> > in my configs. > >> >> > > >> >> > This an old IBM T40p notebook with Pentium-M (Banias) UP processor. > >> >> > IIRC I have flashed the latest BIOS available for this notebook. > >> >> > > >> >> > [ 11.786073] thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04 > >> >> > [ 11.786111] thinkpad_acpi: IBM ThinkPad T40p, model 2374SG6 > >> >> > > >> >> > As I am still sitting in the dark, it would be very helpful to know if > >> >> > I can play with HZ or RCU kernel-config parameters. > >> >> > Can I change RCU behaviour from user-space? > >> >> > > >> >> > - Sedat - > >> >> > > >> >> > P.S.: Note to myself: Read Documentation/RCU/stallwarn.txt & check > >> >> > possible values in lib/Kconfig.debug > >> >> > > >> >> > >> >> OK, I had a deeper look at the RCU (STALL) kernel-configs. > >> >> > >> >> $ grep RCU /boot/config-2.6.38-next20110323-3-686-iniza | grep STALL > >> >> # CONFIG_RCU_CPU_STALL_DETECTOR is not set > >> >> > >> >> $ grep RCU /boot/config-2.6.38-next20110324-2-686-iniza | grep STALL > >> >> # CONFIG_RCU_CPU_STALL_DETECTOR is not set > >> >> > >> >> $ grep RCU /boot/config-2.6.38-next20110325-2-686-iniza | grep STALL > >> >> CONFIG_RCU_CPU_STALL_TIMEOUT=60 > >> > > >> > Yep, you moved from a kernel version that had the stall detected disabled > >> > by default to one that enables it by default. > >> > > >> > But -next has had stall detection enabled by default for a good > >> > long time now. > >> > > >> >> With my todays (next-20110325) linux-next kernel I cannot work! > >> >> The yesterday call-traces could be indeed a different issue (I am > >> >> currently testing with the 2 patches from block-tree [1]). > >> >> > >> >> Now, I am building a new linux-next kernel with CONFIG_TREE_RCU=y as > >> >> recommended in Documentation/RCU/stallwarn.txt file. > >> > > >> > You had CONFIG_TREE_PREEMPT_RCU=y earlier? Tiny RCU does not have > >> > a stall detector. > >> > > >> > Thanx, Paul > >> > > >> >> - Sedat - > >> >> > >> >> [1] http://lkml.org/lkml/2011/3/25/326 > >> > > >> > >> No, and I have here SMP configured. > >> Yesterday's RCU and SMP kernel config settings: > >> > >> # egrep '_RCU|RCU_|_SMP' /boot/config-2.6.38-next20110324-2-686-iniza > >> CONFIG_X86_32_SMP=y > >> CONFIG_TREE_RCU=y > >> # CONFIG_PREEMPT_RCU is not set > >> # CONFIG_RCU_TRACE is not set > >> CONFIG_RCU_FANOUT=32 > >> # CONFIG_RCU_FANOUT_EXACT is not set > >> CONFIG_RCU_FAST_NO_HZ=y > >> # CONFIG_TREE_RCU_TRACE is not set > >> CONFIG_USE_GENERIC_SMP_HELPERS=y > >> CONFIG_SMP=y > >> CONFIG_PM_SLEEP_SMP=y > >> CONFIG_HAVE_TEXT_POKE_SMP=y > >> CONFIG_SCSI_SAS_HOST_SMP=y > >> # CONFIG_SPARSE_RCU_POINTER is not set > >> # CONFIG_RCU_TORTURE_TEST is not set > >> # CONFIG_RCU_CPU_STALL_DETECTOR is not set > >> > >> IIRC Tiny RCU and SMP bite each other? > >> So, what do you recommend for an UP processor machine? > > > > If you want RCU stall warnings, or if you are building an SMP kernel, it > > has to be either TREE_RCU or TREE_PREEMPT_RCU. If you are on UP and don't > > care about RCU stall warnings, then either TINY_RCU or TINY_PREEMPT_RCU > > will work fine. > > > > I just saw your "Now, I am building a new linux-next kernel with > > CONFIG_TREE_RCU=y" and thought that you were hinting that you had > > been running with something other than TREE_RCU. > > > > I could suppress RCU STALL warning via sysfs, but the complete system > is just freaky. > With doing a simple tar (without compression!) job, I can't use my webbrowser. Then it does sound like the RCU stall warnings really are locating a legitimate problem, despite the strange stack trace. > Selecting TINY_RCU means no CONFIG_SMP! > (OK, I can hack the Kconfig dependency to change this.) Yes, TINY_RCU is designed to be UP-only. Please do not try it in an SMP kernel. It will break badly. > I am thinking of distributions, shall they offer another linux-kernel > binary especially for UP machines? > Somehow ridiculuous. No, they should continue to do what they are currently doing. TINY_RCU is primarily for embedded systems. > I still haven't get some hints to play with the timeouts, so I tried > CONFIG_RCU_CPU_STALL_TIMEOUT=120 (default according to Kconfig entry > is 60). > Can this really help here. Why? > I had a closer look into my logs, there I saw a max jiffies of > t=780510 (six digits!) Yow! That is a very long stall. > /var/log/syslog.1:Mar 25 18:09:15 tbox kernel: [ 3221.112034] INFO: > rcu_sched_state detected stall on CPU 0 (t=780510 jiffies) > And I asked for the common play between HZ and RCU values in > kernel-config parameters. > Currently, I have CONFIG_HZ_250=y. > Can you enlighten me. please. CONFIG_HZ_250 is entirely reasonable. > I have the impression that even I could disable "old" > CONFIG_RCU_CPU_STALL_DETECTOR value, this stalling here has other > reasons. The stall detector used to be disabled by default. You were running something that worked -- what exactly was that? > BROKEN ACPI? Might be... But what about supporting such systems (with > quirks or whatever)? Or a messed up commit. Thanx, Paul > - Sedat - > > P.S.: I have attached all jiffies values from my today's and > yesterday's syslogs and my last used kernel-config. > > >> - Sedat - > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > >> the body of a message to majordomo@xxxxxxxxxxxxxxx > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > >> Please read the FAQ at http://www.tux.org/lkml/ > > > /var/log/syslog:Mar 26 00:36:55 tbox kernel: [ 589.064031] INFO: rcu_sched_state detected stall on CPU 0 (t=120030 jiffies) > /var/log/syslog:Mar 26 00:42:55 tbox kernel: [ 949.184032] INFO: rcu_sched_state detected stall on CPU 0 (t=210060 jiffies) > /var/log/syslog:Mar 26 00:48:55 tbox kernel: [ 1309.304033] INFO: rcu_sched_state detected stall on CPU 0 (t=300090 jiffies) > /var/log/syslog:Mar 26 01:11:09 tbox kernel: [ 208.416034] INFO: rcu_sched_state detected stall on CPU 0 (t=30000 jiffies) > /var/log/syslog:Mar 26 01:16:30 tbox kernel: [ 154.532013] INFO: rcu_sched_state detected stall on CPU 0 (t=30000 jiffies) > /var/log/syslog.1:Mar 25 10:57:04 tbox kernel: [ 157.340021] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies) > /var/log/syslog.1:Mar 25 11:00:04 tbox kernel: [ 337.460033] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies) > /var/log/syslog.1:Mar 25 11:03:05 tbox kernel: [ 517.580032] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies) > /var/log/syslog.1:Mar 25 11:06:05 tbox kernel: [ 697.700033] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies) > /var/log/syslog.1:Mar 25 11:09:05 tbox kernel: [ 877.820034] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies) > /var/log/syslog.1:Mar 25 11:12:05 tbox kernel: [ 1057.940032] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies) > /var/log/syslog.1:Mar 25 11:15:05 tbox kernel: [ 1238.060029] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies) > /var/log/syslog.1:Mar 25 11:18:05 tbox kernel: [ 1418.180033] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies) > /var/log/syslog.1:Mar 25 11:21:05 tbox kernel: [ 1598.300034] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies) > /var/log/syslog.1:Mar 25 11:24:05 tbox kernel: [ 1778.420018] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies) > /var/log/syslog.1:Mar 25 11:27:06 tbox kernel: [ 1958.540024] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies) > /var/log/syslog.1:Mar 25 11:30:06 tbox kernel: [ 2138.660008] INFO: rcu_sched_state detected stall on CPU 0 (t=510330 jiffies) > /var/log/syslog.1:Mar 25 11:33:06 tbox kernel: [ 2318.780033] INFO: rcu_sched_state detected stall on CPU 0 (t=555360 jiffies) > /var/log/syslog.1:Mar 25 13:54:55 tbox kernel: [ 273.224044] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies) > /var/log/syslog.1:Mar 25 13:57:56 tbox kernel: [ 453.344036] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies) > /var/log/syslog.1:Mar 25 14:00:56 tbox kernel: [ 633.464043] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies) > /var/log/syslog.1:Mar 25 14:03:56 tbox kernel: [ 813.584031] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies) > /var/log/syslog.1:Mar 25 14:06:56 tbox kernel: [ 993.704031] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies) > /var/log/syslog.1:Mar 25 14:09:56 tbox kernel: [ 1173.824042] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies) > /var/log/syslog.1:Mar 25 14:12:56 tbox kernel: [ 1353.944020] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies) > /var/log/syslog.1:Mar 25 14:15:56 tbox kernel: [ 1534.064033] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies) > /var/log/syslog.1:Mar 25 14:18:56 tbox kernel: [ 1714.184033] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies) > /var/log/syslog.1:Mar 25 14:21:56 tbox kernel: [ 1894.304038] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies) > /var/log/syslog.1:Mar 25 14:24:57 tbox kernel: [ 2074.424033] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies) > /var/log/syslog.1:Mar 25 17:18:13 tbox kernel: [ 159.072032] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies) > /var/log/syslog.1:Mar 25 17:21:13 tbox kernel: [ 339.192034] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies) > /var/log/syslog.1:Mar 25 17:24:13 tbox kernel: [ 519.312032] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies) > /var/log/syslog.1:Mar 25 17:27:13 tbox kernel: [ 699.432033] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies) > /var/log/syslog.1:Mar 25 17:30:14 tbox kernel: [ 879.552031] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies) > /var/log/syslog.1:Mar 25 17:33:14 tbox kernel: [ 1059.672035] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies) > /var/log/syslog.1:Mar 25 17:36:14 tbox kernel: [ 1239.792026] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies) > /var/log/syslog.1:Mar 25 17:39:14 tbox kernel: [ 1419.912036] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies) > /var/log/syslog.1:Mar 25 17:42:14 tbox kernel: [ 1600.032035] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies) > /var/log/syslog.1:Mar 25 17:45:14 tbox kernel: [ 1780.152033] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies) > /var/log/syslog.1:Mar 25 17:48:14 tbox kernel: [ 1960.272034] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies) > /var/log/syslog.1:Mar 25 17:51:14 tbox kernel: [ 2140.392012] INFO: rcu_sched_state detected stall on CPU 0 (t=510330 jiffies) > /var/log/syslog.1:Mar 25 17:54:15 tbox kernel: [ 2320.512031] INFO: rcu_sched_state detected stall on CPU 0 (t=555360 jiffies) > /var/log/syslog.1:Mar 25 17:57:15 tbox kernel: [ 2500.632036] INFO: rcu_sched_state detected stall on CPU 0 (t=600390 jiffies) > /var/log/syslog.1:Mar 25 18:00:15 tbox kernel: [ 2680.751704] INFO: rcu_sched_state detected stall on CPU 0 (t=645420 jiffies) > /var/log/syslog.1:Mar 25 18:03:15 tbox kernel: [ 2860.872032] INFO: rcu_sched_state detected stall on CPU 0 (t=690450 jiffies) > /var/log/syslog.1:Mar 25 18:06:15 tbox kernel: [ 3040.992034] INFO: rcu_sched_state detected stall on CPU 0 (t=735480 jiffies) > /var/log/syslog.1:Mar 25 18:09:15 tbox kernel: [ 3221.112034] INFO: rcu_sched_state detected stall on CPU 0 (t=780510 jiffies) > /var/log/syslog.1:Mar 25 20:37:17 tbox kernel: [ 162.424039] INFO: rcu_sched_state detected stall on CPU 0 (t=15000 jiffies) > /var/log/syslog.1:Mar 25 20:40:17 tbox kernel: [ 342.544034] INFO: rcu_sched_state detected stall on CPU 0 (t=60030 jiffies) > /var/log/syslog.1:Mar 25 20:43:17 tbox kernel: [ 522.664036] INFO: rcu_sched_state detected stall on CPU 0 (t=105060 jiffies) > /var/log/syslog.1:Mar 25 20:46:17 tbox kernel: [ 702.784032] INFO: rcu_sched_state detected stall on CPU 0 (t=150090 jiffies) > /var/log/syslog.1:Mar 25 20:49:17 tbox kernel: [ 882.904036] INFO: rcu_sched_state detected stall on CPU 0 (t=195120 jiffies) > /var/log/syslog.1:Mar 25 20:52:17 tbox kernel: [ 1063.024052] INFO: rcu_sched_state detected stall on CPU 0 (t=240150 jiffies) > /var/log/syslog.1:Mar 25 20:55:17 tbox kernel: [ 1243.144034] INFO: rcu_sched_state detected stall on CPU 0 (t=285180 jiffies) > /var/log/syslog.1:Mar 25 20:58:17 tbox kernel: [ 1423.264034] INFO: rcu_sched_state detected stall on CPU 0 (t=330210 jiffies) > /var/log/syslog.1:Mar 25 21:01:18 tbox kernel: [ 1603.384032] INFO: rcu_sched_state detected stall on CPU 0 (t=375240 jiffies) > /var/log/syslog.1:Mar 25 21:04:18 tbox kernel: [ 1783.504018] INFO: rcu_sched_state detected stall on CPU 0 (t=420270 jiffies) > /var/log/syslog.1:Mar 25 21:07:18 tbox kernel: [ 1963.624034] INFO: rcu_sched_state detected stall on CPU 0 (t=465300 jiffies) > /var/log/syslog.1:Mar 25 21:10:19 tbox kernel: [ 2143.744028] INFO: rcu_sched_state detected stall on CPU 0 (t=510330 jiffies) > /var/log/syslog.1:Mar 26 00:30:55 tbox kernel: [ 228.944029] INFO: rcu_sched_state detected stall on CPU 0 (t=30000 jiffies) -- To unsubscribe from this list: send the line "unsubscribe linux-next" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
