Hi Samuel,
Today's linux-next merge of the mfd tree got a conflict in
arch/arm/mach-ux500/board-mop500-regulators.c and
arch/arm/mach-ux500/board-mop500.c between commits d1de85a23144
("mach-ux500: add a few AB8500 regulator consumers v3") and a71b819b6edf
("mach-ux500: platform data for SFH7741 proximity sensor driver") from
Linus' tree and commit 00423735a08e ("mach-ux500: configure board for the
TPS61052 regulator v2") from the mfd tree.
I fixed them up (see below) and can carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr@xxxxxxxxxxxxxxxx
diff --cc arch/arm/mach-ux500/board-mop500-regulators.c
index 875c91b,0825012..0000000
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@@ -13,55 -13,30 +13,79 @@@
#include <linux/regulator/ab8500.h>
#include "board-mop500-regulators.h"
+ /*
+ * TPS61052 regulator
+ */
+ static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
+ /*
+ * Boost converter supply to raise voltage on audio speaker, this
+ * is actually connected to three pins, VInVhfL (left amplifier)
+ * VInVhfR (right amplifier) and VIntDClassInt - all three must
+ * be connected to the same voltage.
+ */
+ REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
+ };
+
+ struct regulator_init_data tps61052_regulator = {
+ .constraints = {
+ .name = "vaudio-hf",
+ .min_uV = 4500000,
+ .max_uV = 4500000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
+ .consumer_supplies = tps61052_vaudio_consumers,
+ };
+
+static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
+ /* External displays, connector on board 2v5 power supply */
+ REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
+ /* SFH7741 proximity sensor */
+ REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
+ /* BH1780GLS ambient light sensor */
+ REGULATOR_SUPPLY("vcc", "2-0029"),
+ /* lsm303dlh accelerometer */
+ REGULATOR_SUPPLY("vdd", "3-0018"),
+ /* lsm303dlh magnetometer */
+ REGULATOR_SUPPLY("vdd", "3-001e"),
+ /* Rohm BU21013 Touchscreen devices */
+ REGULATOR_SUPPLY("avdd", "3-005c"),
+ REGULATOR_SUPPLY("avdd", "3-005d"),
+ /* Synaptics RMI4 Touchscreen device */
+ REGULATOR_SUPPLY("vdd", "3-004b"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
+ /* On-board eMMC power */
+ REGULATOR_SUPPLY("vmmc", "sdi4"),
+ /* AB8500 audio codec */
+ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
+ /* External MMC slot power */
+ REGULATOR_SUPPLY("vmmc", "sdi0"),
+};
+
+static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
+ /* TV-out DENC supply */
+ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
+ /* Internal general-purpose ADC */
+ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
+ /* SoC core supply, no device */
+ REGULATOR_SUPPLY("v-intcore", NULL),
+ /* USB Transciever */
+ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vana_consumers[] = {
+ /* External displays, connector on board, 1v8 power supply */
+ REGULATOR_SUPPLY("vsmps2", "mcde.0"),
+};
+
/* AB8500 regulators */
struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
/* supplies to the display/camera */
diff --cc arch/arm/mach-ux500/board-mop500.c
index 8790d98,1e75d7e..0000000
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@@ -21,9 -20,7 +21,10 @@@
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>
#include <linux/mfd/tc3589x.h>
+#include <linux/leds-lp5521.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+ #include <linux/mfd/tps6105x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@@ -65,7 -104,26 +66,16 @@@ struct platform_device ab8500_device =
.resource = ab8500_resources,
};
-static struct pl022_ssp_controller ssp0_platform_data = {
- .bus_id = 0,
- /* pl022 not yet supports dma */
- .enable_dma = 0,
- /* on this platform, gpio 31,142,144,214 &
- * 224 are connected as chip selects
- */
- .num_chipselect = 5,
-};
-
/*
+ * TPS61052
+ */
+
+ static struct tps6105x_platform_data mop500_tps61052_data = {
+ .mode = TPS6105X_MODE_VOLTAGE,
+ .regulator_data = &tps61052_regulator,
+ };
+
+ /*
* TC35892
*/
@@@ -85,60 -143,14 +95,64 @@@ static struct tc3589x_platform_data mop
.irq_base = MOP500_EGPIO_IRQ_BASE,
};
+static struct lp5521_led_config lp5521_pri_led[] = {
+ [0] = {
+ .chan_nr = 0,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [1] = {
+ .chan_nr = 1,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [2] = {
+ .chan_nr = 2,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+};
+
+static struct lp5521_platform_data __initdata lp5521_pri_data = {
+ .label = "lp5521_pri",
+ .led_config = &lp5521_pri_led[0],
+ .num_channels = 3,
+ .clock_mode = LP5521_CLOCK_EXT,
+};
+
+static struct lp5521_led_config lp5521_sec_led[] = {
+ [0] = {
+ .chan_nr = 0,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [1] = {
+ .chan_nr = 1,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [2] = {
+ .chan_nr = 2,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+};
+
+static struct lp5521_platform_data __initdata lp5521_sec_data = {
+ .label = "lp5521_sec",
+ .led_config = &lp5521_sec_led[0],
+ .num_channels = 3,
+ .clock_mode = LP5521_CLOCK_EXT,
+};
+
static struct i2c_board_info mop500_i2c0_devices[] = {
{
+ I2C_BOARD_INFO("tps61052", 0x33),
+ .platform_data = &mop500_tps61052_data,
+ },
+ {
I2C_BOARD_INFO("tc3589x", 0x42),
- .irq = NOMADIK_GPIO_TO_IRQ(217),
+ .irq = NOMADIK_GPIO_TO_IRQ(217),
.platform_data = &mop500_tc35892_data,
},
};
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
