Hi Dmitry,
Today's linux-next merge of the input tree got a conflict in
arch/arm/mach-omap2/board-rx51-peripherals.c between commit
ebff0472f451a07fae9f4e72bdc2af4c52ebb682 ("omap3: rx51: Add wl1251 wlan
driver support") from the omap tree and commit
5018461a887d58f4601207deeebb7c352c2da20a ("ARM OMAP3: RX-51 board - add
initialization of gpio keys") from the input tree.
Just overlapping additions. I fixed it up (see below) and can carry the
fix as necessary.
--
Cheers,
Stephen Rothwell sfr@xxxxxxxxxxxxxxxx
diff --cc arch/arm/mach-omap2/board-rx51-peripherals.c
index caaeadc,a5c02a4..0000000
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@@ -21,53 -20,103 +21,134 @@@
#include <linux/delay.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
+ #include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/onenand.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/gpmc-smc91x.h>
#include "mmc-twl4030.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
+#define RX51_WL1251_POWER_GPIO 87
+#define RX51_WL1251_IRQ_GPIO 42
+
+static void rx51_wl1251_set_power(bool enable);
+
+static struct wl12xx_platform_data wl1251_pdata = {
+ .set_power = rx51_wl1251_set_power,
+};
+
+static struct omap2_mcspi_device_config wl1251_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+/* list all spi devices here */
+enum {
+ RX51_SPI_WL1251,
+};
+
+static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
+ [RX51_SPI_WL1251] = {
+ .modalias = "wl1251",
+ .bus_num = 4,
+ .chip_select = 0,
+ .max_speed_hz = 48000000,
+ .mode = SPI_MODE_2,
+ .controller_data = &wl1251_mcspi_config,
+ .platform_data = &wl1251_pdata,
+ },
+};
+
+ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+
+ #define RX51_GPIO_CAMERA_LENS_COVER 110
+ #define RX51_GPIO_CAMERA_FOCUS 68
+ #define RX51_GPIO_CAMERA_CAPTURE 69
+ #define RX51_GPIO_KEYPAD_SLIDE 71
+ #define RX51_GPIO_LOCK_BUTTON 113
+ #define RX51_GPIO_PROXIMITY 89
+
+ #define RX51_GPIO_DEBOUNCE_TIMEOUT 10
+
+ static struct gpio_keys_button rx51_gpio_keys[] = {
+ {
+ .desc = "Camera Lens Cover",
+ .type = EV_SW,
+ .code = SW_CAMERA_LENS_COVER,
+ .gpio = RX51_GPIO_CAMERA_LENS_COVER,
+ .active_low = 1,
+ .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
+ }, {
+ .desc = "Camera Focus",
+ .type = EV_KEY,
+ .code = KEY_CAMERA_FOCUS,
+ .gpio = RX51_GPIO_CAMERA_FOCUS,
+ .active_low = 1,
+ .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
+ }, {
+ .desc = "Camera Capture",
+ .type = EV_KEY,
+ .code = KEY_CAMERA,
+ .gpio = RX51_GPIO_CAMERA_CAPTURE,
+ .active_low = 1,
+ .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
+ }, {
+ .desc = "Lock Button",
+ .type = EV_KEY,
+ .code = KEY_SCREENLOCK,
+ .gpio = RX51_GPIO_LOCK_BUTTON,
+ .active_low = 1,
+ .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
+ }, {
+ .desc = "Keypad Slide",
+ .type = EV_SW,
+ .code = SW_KEYPAD_SLIDE,
+ .gpio = RX51_GPIO_KEYPAD_SLIDE,
+ .active_low = 1,
+ .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
+ }, {
+ .desc = "Proximity Sensor",
+ .type = EV_SW,
+ .code = SW_FRONT_PROXIMITY,
+ .gpio = RX51_GPIO_PROXIMITY,
+ .active_low = 0,
+ .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
+ }
+ };
+
+ static struct gpio_keys_platform_data rx51_gpio_keys_data = {
+ .buttons = rx51_gpio_keys,
+ .nbuttons = ARRAY_SIZE(rx51_gpio_keys),
+ };
+
+ static struct platform_device rx51_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &rx51_gpio_keys_data,
+ },
+ };
+
+ static void __init rx51_add_gpio_keys(void)
+ {
+ platform_device_register(&rx51_gpio_keys_device);
+ }
+ #else
+ static void __init rx51_add_gpio_keys(void)
+ {
+ }
+ #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
+
static int board_keymap[] = {
KEY(0, 0, KEY_Q),
KEY(0, 1, KEY_O),
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
