On Tue, 2 Jun 2009 10:34:32 +0100, Mark Brown wrote:
> On Tue, Jun 02, 2009 at 09:12:29AM +0200, Jean Delvare wrote:
> > What could be done, OTOH, is to surround all the function declarations
> > in <linux/i2c.h> with a simple #ifdef CONFIG_I2C, so that mistakes are
> > caught earlier (build time instead of link time.)
>
> That'd be helpful, yes.
Here you go:
From: Jean Delvare <khali@xxxxxxxxxxxx>
Subject: i2c: Don't advertise i2c functions when not available
Surround i2c function declarations with ifdefs, so that they aren't
advertised when i2c-core isn't actually built. That way, drivers using
these functions unconditionally will result in an immediate build
failure, rather than a late linking failure which is harder to figure
out.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
---
include/linux/i2c.h | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- linux-2.6.30-rc8.orig/include/linux/i2c.h 2009-06-05 08:43:48.000000000 +0200
+++ linux-2.6.30-rc8/include/linux/i2c.h 2009-06-05 09:34:27.000000000 +0200
@@ -47,6 +47,7 @@ struct i2c_driver;
union i2c_smbus_data;
struct i2c_board_info;
+#if defined CONFIG_I2C || defined CONFIG_I2C_MODULE
/*
* The master routines are the ones normally used to transmit data to devices
* on a bus (or read from them). Apart from two basic transfer functions to
@@ -93,6 +94,7 @@ extern s32 i2c_smbus_read_i2c_block_data
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
u8 command, u8 length,
const u8 *values);
+#endif /* I2C */
/**
* struct i2c_driver - represent an I2C device driver
@@ -260,6 +262,7 @@ struct i2c_board_info {
.type = dev_type, .addr = (dev_addr)
+#if defined CONFIG_I2C || defined CONFIG_I2C_MODULE
/* Add-on boards should register/unregister their devices; e.g. a board
* with integrated I2C, a config eeprom, sensors, and a codec that's
* used in conjunction with the primary hardware.
@@ -283,6 +286,7 @@ extern struct i2c_client *
i2c_new_dummy(struct i2c_adapter *adap, u16 address);
extern void i2c_unregister_device(struct i2c_client *);
+#endif /* I2C */
/* Mainboard arch_initcall() code should register all its I2C devices.
* This is done at arch_initcall time, before declaring any i2c adapters.
@@ -299,7 +303,7 @@ i2c_register_board_info(int busnum, stru
{
return 0;
}
-#endif
+#endif /* I2C_BOARDINFO */
/*
* The following structs are for those who like to implement new bus drivers:
@@ -394,6 +398,7 @@ struct i2c_client_address_data {
/* administration...
*/
+#if defined CONFIG_I2C || defined CONFIG_I2C_MODULE
extern int i2c_add_adapter(struct i2c_adapter *);
extern int i2c_del_adapter(struct i2c_adapter *);
extern int i2c_add_numbered_adapter(struct i2c_adapter *);
@@ -435,6 +440,7 @@ static inline int i2c_adapter_id(struct
{
return adap->nr;
}
+#endif /* I2C */
#endif /* __KERNEL__ */
/**
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
