This patch fixes a compile problem when the MAC80211_LEDS triggers are enabled but not LED class itself. (which is sort of pointless, but anyway...) Signed-off-by: Christian Lamparter <chunkeey@xxxxxx> --- mb, thank you for the tips! Randy Dunlap can you please give this patch a try? John, do you know where the patch form Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> went? --- diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig index 0e344ac..ee1aaca 100644 --- a/drivers/net/wireless/p54/Kconfig +++ b/drivers/net/wireless/p54/Kconfig @@ -1,9 +1,10 @@ config P54_COMMON tristate "Softmac Prism54 support" - depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL + depends on MAC80211 && WLAN_80211 && EXPERIMENTAL + select FW_LOADER ---help--- - This is common code for isl38xx based cards. - This module does nothing by itself - the USB/PCI frontends + This is common code for isl38xx/stlc45xx based modules. + This module does nothing by itself - the USB/PCI/SPI frontends also need to be enabled in order to support any devices. These devices require softmac firmware which can be found at @@ -17,31 +18,6 @@ config P54_USB select CRC32 ---help--- This driver is for USB isl38xx based wireless cards. - These are USB based adapters found in devices such as: - - 3COM 3CRWE254G72 - SMC 2862W-G - Accton 802.11g WN4501 USB - Siemens Gigaset USB - Netgear WG121 - Netgear WG111 - Medion 40900, Roper Europe - Shuttle PN15, Airvast WM168g, IOGear GWU513 - Linksys WUSB54G - Linksys WUSB54G Portable - DLink DWL-G120 Spinnaker - DLink DWL-G122 - Belkin F5D7050 ver 1000 - Cohiba Proto board - SMC 2862W-G version 2 - U.S. Robotics U5 802.11g Adapter - FUJITSU E-5400 USB D1700 - Sagem XG703A - DLink DWL-G120 Cohiba - Spinnaker Proto board - Linksys WUSB54AG - Inventel UR054G - Spinnaker DUT These devices require softmac firmware which can be found at http://prism54.org/ @@ -71,3 +47,8 @@ config P54_SPI Nokia's N800/N810 Portable Internet Tablet. If you choose to build a module, it'll be called p54spi. + +config P54_LEDS + bool + depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON) + default y diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 0a98983..0c1b057 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -21,9 +21,9 @@ #include <linux/etherdevice.h> #include <net/mac80211.h> -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS #include <linux/leds.h> -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ #include "p54.h" #include "p54common.h" @@ -2420,7 +2420,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, return 0; } -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS static void p54_led_brightness_set(struct led_classdev *led_dev, enum led_brightness brightness) { @@ -2508,7 +2508,7 @@ static void p54_unregister_leds(struct ieee80211_hw *dev) if (priv->assoc_led.registered) led_classdev_unregister(&priv->assoc_led.led_dev); } -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ static const struct ieee80211_ops p54_ops = { .tx = p54_tx, @@ -2592,11 +2592,11 @@ int p54_register_common(struct ieee80211_hw *dev, struct device *pdev) return err; } - #ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS err = p54_init_leds(dev); if (err) return err; - #endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy)); return 0; @@ -2610,9 +2610,9 @@ void p54_free_common(struct ieee80211_hw *dev) kfree(priv->output_limit); kfree(priv->curve_data); - #ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS p54_unregister_leds(dev); - #endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ } EXPORT_SYMBOL_GPL(p54_free_common); -- To unsubscribe from this list: send the line "unsubscribe linux-next" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
