While booting next 17 kernel on a x86_64 box noticed the following
powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00)
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/cpufreq/powernow-k8.c:1255 powernowk8_cpu_init+0x493/0xd22()
Hardware name: BladeCenter LS21 -[79716AA]-
[Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff80240744>] warn_slowpath+0xd3/0xf2
[<ffffffff80257ab3>] ? up+0x34/0x39
[<ffffffff802606a9>] ? mark_held_locks+0x49/0x69
[<ffffffff80527038>] ? __mutex_unlock_slowpath+0x117/0x123
[<ffffffff802607fd>] ? trace_hardirqs_on_caller+0x134/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8052704d>] ? mutex_unlock+0x9/0xb
[<ffffffff803f26f0>] ? acpi_processor_register_performance+0x3a9/0x3da
[<ffffffff802bffd2>] ? kmem_cache_alloc+0xcc/0xfa
[<ffffffff802607fd>] ? trace_hardirqs_on_caller+0x134/0x15f
[<ffffffff8039be94>] ? __bitmap_weight+0x78/0x8d
[<ffffffff8051eed2>] powernowk8_cpu_init+0x493/0xd22
[<ffffffff8025f25a>] ? lockdep_init_map+0x9c/0x467
[<ffffffff8047dadc>] ? lock_policy_rwsem_write+0x46/0xaf
[<ffffffff8047dec5>] cpufreq_add_dev+0x1c6/0x7af
[<ffffffff80262e82>] ? __lock_acquire+0x773/0x7de
[<ffffffff802606a9>] ? mark_held_locks+0x49/0x69
[<ffffffff8052774f>] ? mutex_lock_nested+0x29b/0x2b4
[<ffffffff802607fd>] ? trace_hardirqs_on_caller+0x134/0x15f
[<ffffffff8025e753>] ? debug_mutex_free_waiter+0x53/0x57
[<ffffffff8052775b>] ? mutex_lock_nested+0x2a7/0x2b4
[<ffffffff80425df0>] ? sysdev_driver_register+0x75/0x10d
[<ffffffff80425e2a>] sysdev_driver_register+0xaf/0x10d
[<ffffffff8047cb95>] cpufreq_register_driver+0xc7/0x1f6
[<ffffffff8051ea33>] powernowk8_init+0xc5/0xd1
[<ffffffff8051e96e>] ? powernowk8_init+0x0/0xd1
[<ffffffff8020905c>] do_one_initcall+0x56/0x130
[<ffffffff80282dc4>] ? register_irq_proc+0xae/0xca
[<ffffffff80300000>] ? writenote+0x8b/0xb8
[<ffffffff808b193a>] kernel_init+0x1a2/0x1f9
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80257a8e>] ? up+0xf/0x39
[<ffffffff808b1798>] ? kernel_init+0x0/0x1f9
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
---[ end trace dd3dd2a755e71b32 ]---
Should i be worried ?
I also see few more traces with __debug_object_init().
Will send a separate mail with details for that problem.
Complete dmesg attached.
Thanks
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-autotest root=/dev/sda1 console=tty0 selinux=0 console=tty
S1,19200 noapic IDENT=1234879013
[Linux-bzImage, setup=0x2c00, size=0x280e90]
initrd /boot/initrd-autotest
[Linux-initrd @ 0x37d8b000, 0x264497 bytes]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29-rc5-autotest-next-20090217 (root@ls21b) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Tue Feb 17 19:24:51 IST 2009
Command line: root=/dev/sda1 console=tty0 selinux=0 console=ttyS1,19200 noapic IDENT=1234879013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffa44c0 (usable)
BIOS-e820: 00000000cffa44c0 - 00000000cffa7400 (ACPI data)
BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI 2.3 present.
last_pfn = 0x130000 max_arch_pfn = 0x100000000
last_pfn = 0xcffa4 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000cffa4000
last_map_addr: cffa4000 end: cffa4000
init_memory_mapping: 0000000100000000-0000000130000000
last_map_addr: 130000000 end: 130000000
RAMDISK: 37d8b000 - 37fef497
ACPI: RSDP 000FDFE0, 0014 (r0 IBM )
ACPI: RSDT CFFA7380, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: FACP CFFA72C0, 0084 (r2 IBM SERLEWIS 1000 IBM 45444F43)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
FADT: X_PM1b_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT CFFA44C0, 2B02 (r1 IBM SERLEWIS 1000 INTL 2002025)
ACPI: FACS CFFA7040, 0040
ACPI: APIC CFFA7200, 0090 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: SRAT CFFA7100, 00E8 (r1 AMD HAMMER 1 AMD 1)
ACPI: HPET CFFA70C0, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: MCFG CFFA7080, 003C (r1 IBM SERLEWIS 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-d0000000
SRAT: Node 0 PXM 0 100000000-130000000
Bootmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [000000000000a640 - 000000000001063f]
bootmap [0000000000011000 - 0000000000036fff] pages 26
(8 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000159ac80] TEXT DATA BSS ==> [0000200000 - 000159ac80]
#3 [0037d8b000 - 0037fef497] RAMDISK ==> [0037d8b000 - 0037fef497]
#4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
#5 [000159b000 - 0001c1e000] PGTABLE ==> [000159b000 - 0001c1e000]
#6 [0001c1e000 - 0001d9f000] PGTABLE ==> [0001c1e000 - 0001d9f000]
#7 [0000008000 - 000000a640] MEMNODEMAP ==> [0000008000 - 000000a640]
found SMP MP-table at [ffff88000009d140] 9d140
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x000cffa4
0: 0x00100000 -> 0x00130000
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x488
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
ACPI: HPET id: 0x1166a201 base: 0xfed00000
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: IBM ENSW
MPTABLE: Product ID: LEWIS SMP
MPTABLE: APIC at: 0xFEE00000
I/O APIC #14 Version 17 at 0xFEC00000.
I/O APIC #13 Version 17 at 0xFEC02000.
Processors: 4
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at d4000000 (gap: d0000000:24000000)
NR_CPUS:255 nr_cpumask_bits:255 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Allocating 81920 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021527
Policy zone: Normal
Kernel command line: root=/dev/sda1 console=tty0 selinux=0 console=ttyS1,19200 noapic IDENT=1234879013
Initializing CPU#0
Experimental hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
Experimental hierarchical RCU init done.
NR_IRQS:4352
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 2200.007 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 4607 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
allocated 41943040 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Checking aperture...
No AGP bridge found
Node 0: aperture @ f4000000 size 64 MB
Node 1: aperture @ f4000000 size 64 MB
Memory: 4028404k/4980736k available (3259k kernel code, 787196k absent, 165136k reserved, 2441k data, 428k init)
ODEBUG: selftest passed
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. <7>spurious 8259A interrupt: IRQ7.
4400.01 BogoMIPS (lpj=2200007)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20090123
ACPI: setting ELCR to 0200 (from 06a0)
Setting APIC routing to flat
CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
APIC calibration not consistent with PM-Timer: 805ms instead of 100ms
APIC delta adjusted to PM-Timer: 8523016 (68659200)
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 30001.05 BogoMIPS (lpj=15000527)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/0x2 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
lockdep: fixing up alternatives.
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 30001.08 BogoMIPS (lpj=15000541)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
lockdep: fixing up alternatives.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 30001.02 BogoMIPS (lpj=15000511)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
Brought up 4 CPUs
Total of 4 processors activated (94403.17 BogoMIPS).
net_namespace: 1992 bytes
NET: Registered protocol family 16
TOM: 00000000d0000000 aka 3328M
TOM2: 0000000130000000 aka 4864M
ACPI: bus type pci registered
PCI: MCFG configuration 0: base fa000000 segment 0 buses 0 - 8
PCI: MCFG area at fa000000 reserved in E820
PCI: Using MMCONFIG at fa000000 - fa8fffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: Enabling HT MSI Mapping
pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.2: PME# disabled
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:05.0: PME# supported from D3hot D3cold
pci 0000:02:05.0: PME# disabled
ACPI: PCI Interrupt Link [LPAC] (IRQs *9)
ACPI: PCI Interrupt Link [LPUS] (IRQs *5)
ACPI: PCI Interrupt Link [LPID] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LPSA] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LPSM] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP00] (IRQs *10)
ACPI: PCI Interrupt Link [LP01] (IRQs *7)
ACPI: PCI Interrupt Link [LP02] (IRQs *10)
ACPI: PCI Interrupt Link [LP03] (IRQs *9)
ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP0A] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KB
init_memory_mapping: 00000000f4000000-00000000f8000000
last_map_addr: f8000000 end: f8000000
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x510-0x517 has been reserved
system 00:01: ioport range 0x504-0x507 has been reserved
system 00:01: ioport range 0x500-0x503 has been reserved
system 00:01: ioport range 0x520-0x53f has been reserved
system 00:01: ioport range 0x540-0x547 has been reserved
system 00:01: ioport range 0x460-0x461 has been reserved
system 00:0a: ioport range 0x400-0x47f could not be reserved
system 00:0a: ioport range 0x480-0x4cf has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x4d6-0x4e0 has been reserved
system 00:0a: ioport range 0x540-0x55f could not be reserved
system 00:0a: ioport range 0x600-0x600 has been reserved
system 00:0a: ioport range 0xc00-0xc01 has been reserved
system 00:0a: ioport range 0xc06-0xca6 has been reserved
system 00:0a: ioport range 0xca8-0xca8 has been reserved
system 00:0a: ioport range 0xcac-0xcac has been reserved
system 00:0a: ioport range 0xcb0-0xcb0 has been reserved
system 00:0a: ioport range 0xcb4-0xcb4 has been reserved
system 00:0a: ioport range 0xcc0-0xcdf has been reserved
system 00:0a: iomem range 0xf4000000-0xfbffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xffffffff has been reserved
pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02
pci 0000:01:0d.0: IO window: disabled
pci 0000:01:0d.0: MEM window: 0xe2000000-0xe6ffffff
pci 0000:01:0d.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xe2000000-0xe7ffffff
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0x4000-0x4fff
pci 0000:00:06.0: MEM window: 0xdf000000-0xe00fffff
pci 0000:00:06.0: PREFETCH window: 0x000000d4000000-0x000000d40fffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: 0xdd000000-0xddffffff
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
pci 0000:00:08.0: IO window: disabled
pci 0000:00:08.0: MEM window: 0xdc000000-0xdcffffff
pci 0000:00:08.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: 0xdb000000-0xdbffffff
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
pci 0000:00:0a.0: IO window: disabled
pci 0000:00:0a.0: MEM window: 0xda000000-0xdaffffff
pci 0000:00:0a.0: PREFETCH window: disabled
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:08
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: 0xd9000000-0xd9ffffff
pci 0000:00:0b.0: PREFETCH window: disabled
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
debug: unmapping init memory ffff880037d8b000..ffff880037ff0000
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper Not tainted 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff802c3eb8>] ? __percpu_alloc_mask+0xfb/0x137
[<ffffffff8026e9dd>] backtrace_regression_test+0x38/0xf7
[<ffffffff808ca152>] ? crash_notes_memory_init+0x0/0x3d
[<ffffffff8020905c>] do_one_initcall+0x56/0x130
[<ffffffff80282dc4>] ? register_irq_proc+0xae/0xca
[<ffffffff80300000>] ? writenote+0x8b/0xb8
[<ffffffff808b193a>] kernel_init+0x1a2/0x1f9
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80257a8e>] ? up+0xf/0x39
[<ffffffff808b1798>] ? kernel_init+0x0/0x1f9
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
<IRQ> [<ffffffff802607e3>] ? trace_hardirqs_on_caller+0x11a/0x15f
[<ffffffff8026e997>] backtrace_test_irq_callback+0x9/0x17
[<ffffffff80245dcf>] tasklet_action+0x6f/0xce
[<ffffffff8024595f>] __do_softirq+0x80/0x159
[<ffffffff8020cfdc>] call_softirq+0x1c/0x34
<EOI> [<ffffffff8020e4d3>] do_softirq+0x39/0x8e
[<ffffffff80245cf5>] ksoftirqd+0x94/0xff
[<ffffffff80245c61>] ? ksoftirqd+0x0/0xff
[<ffffffff80254499>] kthread+0x49/0x78
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80239b33>] ? finish_task_switch+0x3b/0xe0
[<ffffffff80254450>] ? kthread+0x0/0x78
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
Testing a saved backtrace.
The following trace is a kernel self test and not a bug!
[<ffffffff802168c3>] save_stack_trace+0x2a/0x48
[<ffffffff8026ea7b>] backtrace_regression_test+0xd6/0xf7
[<ffffffff8020905c>] do_one_initcall+0x56/0x130
[<ffffffff808b193a>] kernel_init+0x1a2/0x1f9
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffffffffffff>] 0xffffffffffffffff
====[ end of backtrace testing ]====
audit: initializing netlink socket (disabled)
type=2000 audit(1234879200.554:1): initialized
rcu-torture:--- Start of test: nreaders=8 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7867
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:08.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:0a.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
processor ACPI_CPU:02: registered as cooling_device2
ACPI: Processor [CPU2] (supports 8 throttling states)
processor ACPI_CPU:03: registered as cooling_device3
ACPI: Processor [CPU3] (supports 8 throttling states)
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
erial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00)
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/cpufreq/powernow-k8.c:1255 powernowk8_cpu_init+0x493/0xd22()
Hardware name: BladeCenter LS21 -[79716AA]-
[Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff80240744>] warn_slowpath+0xd3/0xf2
[<ffffffff80257ab3>] ? up+0x34/0x39
[<ffffffff802606a9>] ? mark_held_locks+0x49/0x69
[<ffffffff80527038>] ? __mutex_unlock_slowpath+0x117/0x123
[<ffffffff802607fd>] ? trace_hardirqs_on_caller+0x134/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8052704d>] ? mutex_unlock+0x9/0xb
[<ffffffff803f26f0>] ? acpi_processor_register_performance+0x3a9/0x3da
[<ffffffff802bffd2>] ? kmem_cache_alloc+0xcc/0xfa
[<ffffffff802607fd>] ? trace_hardirqs_on_caller+0x134/0x15f
[<ffffffff8039be94>] ? __bitmap_weight+0x78/0x8d
[<ffffffff8051eed2>] powernowk8_cpu_init+0x493/0xd22
[<ffffffff8025f25a>] ? lockdep_init_map+0x9c/0x467
[<ffffffff8047dadc>] ? lock_policy_rwsem_write+0x46/0xaf
[<ffffffff8047dec5>] cpufreq_add_dev+0x1c6/0x7af
[<ffffffff80262e82>] ? __lock_acquire+0x773/0x7de
[<ffffffff802606a9>] ? mark_held_locks+0x49/0x69
[<ffffffff8052774f>] ? mutex_lock_nested+0x29b/0x2b4
[<ffffffff802607fd>] ? trace_hardirqs_on_caller+0x134/0x15f
[<ffffffff8025e753>] ? debug_mutex_free_waiter+0x53/0x57
[<ffffffff8052775b>] ? mutex_lock_nested+0x2a7/0x2b4
[<ffffffff80425df0>] ? sysdev_driver_register+0x75/0x10d
[<ffffffff80425e2a>] sysdev_driver_register+0xaf/0x10d
[<ffffffff8047cb95>] cpufreq_register_driver+0xc7/0x1f6
[<ffffffff8051ea33>] powernowk8_init+0xc5/0xd1
[<ffffffff8051e96e>] ? powernowk8_init+0x0/0xd1
[<ffffffff8020905c>] do_one_initcall+0x56/0x130
[<ffffffff80282dc4>] ? register_irq_proc+0xae/0xca
[<ffffffff80300000>] ? writenote+0x8b/0xb8
[<ffffffff808b193a>] kernel_init+0x1a2/0x1f9
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80257a8e>] ? up+0xf/0x39
[<ffffffff808b1798>] ? kernel_init+0x0/0x1f9
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
---[ end trace dd3dd2a755e71b32 ]---
registered taskstats version 1
debug: unmapping init memory ffffffff808b1000..ffffffff8091c000
Write protecting the kernel read-only data: 4820k
Testing CPA: undo ffffffff80209000-ffffffff806be000
Testing CPA: again
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Louhci_hcd: USB Universal Host Controller Interface driver
ading uhci-hcd.kohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
o module
LoadinACPI: PCI Interrupt Link [LPUS] enabled at IRQ 5
g ohci-hcd.ko moohci_hcd 0000:00:03.0: PCI INT A -> Link[LPUS] -> GSI 5 (level, low) -> IRQ 5
dule
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 5, io mem 0xf3fff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.1: PCI INT A -> Link[LPUS] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 5, io mem 0xf3ffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Loading ehci-hcdehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
.ko module
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:03.2: PCI INT A -> Link[LPUS] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:03.2: irq 5, io mem 0xf3ffd000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Driver 'sd' needs updating - please use bus_type methods
Loading scsi_transport_sas.ko module
Loading mptbase.ko module
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Loading mptscsih.ko module
Loading mptsas.ko module
Fusion MPT SAS Host driver 3.04.07
ACPI: PCI Interrupt Link [LP03] enabled at IRQ 9
mptsas 0000:03:04.0: PCI INT A -> Link[LP03] -> GSI 9 (level, low) -> IRQ 9
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1064 A3: Capabilities={Initiator}
usb 3-4: new high speed USB device using ehci_hcd and address 2
usb 3-4: configuration #1 chosen from 1 choice
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 2 ports detected
ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d()
Hardware name: BladeCenter LS21 -[79716AA]-
Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff80240744>] warn_slowpath+0xd3/0xf2
[<ffffffff8039864e>] ? number+0x115/0x21f
[<ffffffff80529000>] ? _read_lock_irq+0x35/0x41
[<ffffffff80529100>] ? _read_lock_irqsave+0x47/0x4d
[<ffffffff80353336>] ? zisofs_readpage+0x178/0x92e
[<ffffffff8024154f>] ? printk+0x67/0x69
[<ffffffff803a984d>] ? __debug_object_init+0xd8/0x34d
[<ffffffff803a9a30>] __debug_object_init+0x2bb/0x34d
[<ffffffff803a9aef>] debug_object_init+0x14/0x19
[<ffffffff8024a1bf>] init_timer_key+0x22/0x38
[<ffffffffa009d9e3>] mpt_config+0x160/0x289 [mptbase]
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffffa009e421>] mpt_findImVolumes+0x88/0x76a [mptbase]
[<ffffffff80249813>] ? destroy_timer_on_stack+0x10/0x12
[<ffffffff80526cbd>] ? schedule_timeout+0xb1/0xcd
[<ffffffff80249deb>] ? process_timeout+0x0/0xb
[<ffffffff80526cf2>] ? schedule_timeout_uninterruptible+0x19/0x1b
[<ffffffff8024a23c>] ? msleep+0x14/0x1e
[<ffffffffa009b237>] ? WaitForDoorbellInt+0x3f/0x91 [mptbase]
[<ffffffff8052918e>] ? _spin_unlock_irqrestore+0x3f/0x47
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff8025e6c7>] ? debug_mutex_init+0x31/0x3d
[<ffffffffa009f1f4>] mpt_do_ioc_recovery+0x6f1/0x16ab [mptbase]
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529037>] ? _spin_unlock_irq+0x2b/0x31
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80529037>] ? _spin_unlock_irq+0x2b/0x31
[<ffffffff80526a67>] ? wait_for_common+0xd1/0x11e
[<ffffffff80526aa2>] ? wait_for_common+0x10c/0x11e
[<ffffffff80236f84>] ? default_wake_function+0x0/0xf
[<ffffffff8025443d>] ? kthread_create+0x104/0x117
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff8025f723>] ? trace_hardirqs_off+0xd/0xf
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529187>] ? _spin_unlock_irqrestore+0x38/0x47
[<ffffffff8052918e>] ? _spin_unlock_irqrestore+0x3f/0x47
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff803977e3>] ? __up_read+0x7a/0x83
[<ffffffff80257434>] ? up_read+0x26/0x2b
[<ffffffff803b3af6>] ? pci_get_slot+0x4b/0x90
[<ffffffffa00a1ea9>] mpt_attach+0x994/0xb07 [mptbase]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffffa00bb941>] mptsas_probe+0x1a/0x439 [mptsas]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffff803b2c3e>] local_pci_probe+0x12/0x16
[<ffffffff802506ca>] do_work_for_cpu+0x13/0x1b
[<ffffffff80250911>] run_workqueue+0x12c/0x236
[<ffffffff802508ba>] ? run_workqueue+0xd5/0x236
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff802516d4>] worker_thread+0xdb/0xe8
[<ffffffff802545bc>] ? autoremove_wake_function+0x0/0x38
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff80254499>] kthread+0x49/0x78
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80239b33>] ? finish_task_switch+0x3b/0xe0
[<ffffffff80254450>] ? kthread+0x0/0x78
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
---[ end trace dd3dd2a755e71b34 ]---
ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d()
Hardware name: BladeCenter LS21 -[79716AA]-
Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff80240744>] warn_slowpath+0xd3/0xf2
[<ffffffff8039864e>] ? number+0x115/0x21f
[<ffffffff80529000>] ? _read_lock_irq+0x35/0x41
[<ffffffff80529100>] ? _read_lock_irqsave+0x47/0x4d
[<ffffffff8024154f>] ? printk+0x67/0x69
[<ffffffff803a984d>] ? __debug_object_init+0xd8/0x34d
[<ffffffff803a9a30>] __debug_object_init+0x2bb/0x34d
[<ffffffff803a9aef>] debug_object_init+0x14/0x19
[<ffffffff8024a1bf>] init_timer_key+0x22/0x38
[<ffffffffa009d9e3>] mpt_config+0x160/0x289 [mptbase]
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffffa009e5c6>] mpt_findImVolumes+0x22d/0x76a [mptbase]
[<ffffffff80249813>] ? destroy_timer_on_stack+0x10/0x12
[<ffffffff80526cbd>] ? schedule_timeout+0xb1/0xcd
[<ffffffff80249deb>] ? process_timeout+0x0/0xb
[<ffffffff80526cf2>] ? schedule_timeout_uninterruptible+0x19/0x1b
[<ffffffff8024a23c>] ? msleep+0x14/0x1e
[<ffffffffa009b237>] ? WaitForDoorbellInt+0x3f/0x91 [mptbase]
[<ffffffffa00a02f3>] ? mpt_timer_expired+0x0/0x2d [mptbase]
[<ffffffffa009f1f4>] mpt_do_ioc_recovery+0x6f1/0x16ab [mptbase]
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529037>] ? _spin_unlock_irq+0x2b/0x31
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80529037>] ? _spin_unlock_irq+0x2b/0x31
[<ffffffff80526a67>] ? wait_for_common+0xd1/0x11e
[<ffffffff80526aa2>] ? wait_for_common+0x10c/0x11e
[<ffffffff80236f84>] ? default_wake_function+0x0/0xf
[<ffffffff8025443d>] ? kthread_create+0x104/0x117
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff8025f723>] ? trace_hardirqs_off+0xd/0xf
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529187>] ? _spin_unlock_irqrestore+0x38/0x47
[<ffffffff8052918e>] ? _spin_unlock_irqrestore+0x3f/0x47
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff803977e3>] ? __up_read+0x7a/0x83
[<ffffffff80257434>] ? up_read+0x26/0x2b
[<ffffffff803b3af6>] ? pci_get_slot+0x4b/0x90
[<ffffffffa00a1ea9>] mpt_attach+0x994/0xb07 [mptbase]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffffa00bb941>] mptsas_probe+0x1a/0x439 [mptsas]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffff803b2c3e>] local_pci_probe+0x12/0x16
[<ffffffff802506ca>] do_work_for_cpu+0x13/0x1b
[<ffffffff80250911>] run_workqueue+0x12c/0x236
[<ffffffff802508ba>] ? run_workqueue+0xd5/0x236
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff802516d4>] worker_thread+0xdb/0xe8
[<ffffffff802545bc>] ? autoremove_wake_function+0x0/0x38
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff80254499>] kthread+0x49/0x78
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80239b33>] ? finish_task_switch+0x3b/0xe0
[<ffffffff80254450>] ? kthread+0x0/0x78
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
---[ end trace dd3dd2a755e71b35 ]---
ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d()
Hardware name: BladeCenter LS21 -[79716AA]-
Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff80240744>] warn_slowpath+0xd3/0xf2
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8029ada6>] ? free_hot_page+0xb/0xd
[<ffffffff8029b15c>] ? __free_pages+0x23/0x2c
[<ffffffff8029b1aa>] ? free_pages+0x45/0x4a
[<ffffffff80224fb4>] ? gart_free_coherent+0x37/0x3c
[<ffffffff8024154f>] ? printk+0x67/0x69
[<ffffffff803a984d>] ? __debug_object_init+0xd8/0x34d
[<ffffffff803a9a30>] __debug_object_init+0x2bb/0x34d
[<ffffffff803a9aef>] debug_object_init+0x14/0x19
[<ffffffff8024a1bf>] init_timer_key+0x22/0x38
[<ffffffffa009d9e3>] mpt_config+0x160/0x289 [mptbase]
[<ffffffffa009fc88>] mpt_do_ioc_recovery+0x1185/0x16ab [mptbase]
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529037>] ? _spin_unlock_irq+0x2b/0x31
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80529037>] ? _spin_unlock_irq+0x2b/0x31
[<ffffffff80526a67>] ? wait_for_common+0xd1/0x11e
[<ffffffff80526aa2>] ? wait_for_common+0x10c/0x11e
[<ffffffff80236f84>] ? default_wake_function+0x0/0xf
[<ffffffff8025443d>] ? kthread_create+0x104/0x117
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff8025f723>] ? trace_hardirqs_off+0xd/0xf
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529187>] ? _spin_unlock_irqrestore+0x38/0x47
[<ffffffff8052918e>] ? _spin_unlock_irqrestore+0x3f/0x47
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff803977e3>] ? __up_read+0x7a/0x83
[<ffffffff80257434>] ? up_read+0x26/0x2b
[<ffffffff803b3af6>] ? pci_get_slot+0x4b/0x90
[<ffffffffa00a1ea9>] mpt_attach+0x994/0xb07 [mptbase]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffffa00bb941>] mptsas_probe+0x1a/0x439 [mptsas]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffff803b2c3e>] local_pci_probe+0x12/0x16
[<ffffffff802506ca>] do_work_for_cpu+0x13/0x1b
[<ffffffff80250911>] run_workqueue+0x12c/0x236
[<ffffffff802508ba>] ? run_workqueue+0xd5/0x236
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff802516d4>] worker_thread+0xdb/0xe8
[<ffffffff802545bc>] ? autoremove_wake_function+0x0/0x38
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff80254499>] kthread+0x49/0x78
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80239b33>] ? finish_task_switch+0x3b/0xe0
[<ffffffff80254450>] ? kthread+0x0/0x78
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
---[ end trace dd3dd2a755e71b36 ]---
ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d()
Hardware name: BladeCenter LS21 -[79716AA]-
Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff80240744>] warn_slowpath+0xd3/0xf2
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8029ada6>] ? free_hot_page+0xb/0xd
[<ffffffff8029b15c>] ? __free_pages+0x23/0x2c
[<ffffffff8024154f>] ? printk+0x67/0x69
[<ffffffff803a984d>] ? __debug_object_init+0xd8/0x34d
[<ffffffff803a9a30>] __debug_object_init+0x2bb/0x34d
[<ffffffff803a9aef>] debug_object_init+0x14/0x19
[<ffffffff8024a1bf>] init_timer_key+0x22/0x38
[<ffffffffa009d9e3>] mpt_config+0x160/0x289 [mptbase]
[<ffffffff8029ada6>] ? free_hot_page+0xb/0xd
[<ffffffff8029b15c>] ? __free_pages+0x23/0x2c
[<ffffffff8029b1aa>] ? free_pages+0x45/0x4a
[<ffffffffa009fe59>] mpt_do_ioc_recovery+0x1356/0x16ab [mptbase]
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529037>] ? _spin_unlock_irq+0x2b/0x31
[<ffffffffa00a02f3>] ? mpt_timer_expired+0x0/0x2d [mptbase]
[<ffffffff8025443d>] ? kthread_create+0x104/0x117
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff8025f723>] ? trace_hardirqs_off+0xd/0xf
[<ffffffff80223c0f>] ? flat_send_IPI_mask+0x78/0x8a
[<ffffffff80529187>] ? _spin_unlock_irqrestore+0x38/0x47
[<ffffffff8052918e>] ? _spin_unlock_irqrestore+0x3f/0x47
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff803977e3>] ? __up_read+0x7a/0x83
[<ffffffff80257434>] ? up_read+0x26/0x2b
[<ffffffff803b3af6>] ? pci_get_slot+0x4b/0x90
[<ffffffffa00a1ea9>] mpt_attach+0x994/0xb07 [mptbase]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffffa00bb941>] mptsas_probe+0x1a/0x439 [mptsas]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffff803b2c3e>] local_pci_probe+0x12/0x16
[<ffffffff802506ca>] do_work_for_cpu+0x13/0x1b
[<ffffffff80250911>] run_workqueue+0x12c/0x236
[<ffffffff802508ba>] ? run_workqueue+0xd5/0x236
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff802516d4>] worker_thread+0xdb/0xe8
[<ffffffff802545bc>] ? autoremove_wake_function+0x0/0x38
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff80254499>] kthread+0x49/0x78
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80239b33>] ? finish_task_switch+0x3b/0xe0
[<ffffffff80254450>] ? kthread+0x0/0x78
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
---[ end trace dd3dd2a755e71b37 ]---
scsi0 : ioc0: LSISAS1064 A3, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=9
ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x2bb/0x34d()
Hardware name: BladeCenter LS21 -[79716AA]-
Modules linked in: mptsas(+) mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Pid: 20, comm: work_on_cpu/0 Tainted: G W 2.6.29-rc5-autotest-next-20090217 #1
Call Trace:
[<ffffffff80240744>] warn_slowpath+0xd3/0xf2
[<ffffffff80353634>] ? zisofs_readpage+0x476/0x92e
[<ffffffff80398e8c>] ? string+0x3d/0xa2
[<ffffffff80398e8c>] ? string+0x3d/0xa2
[<ffffffff8024154f>] ? printk+0x67/0x69
[<ffffffff803a984d>] ? __debug_object_init+0xd8/0x34d
[<ffffffff803a9a30>] __debug_object_init+0x2bb/0x34d
[<ffffffff803a9aef>] debug_object_init+0x14/0x19
[<ffffffff8024a1bf>] init_timer_key+0x22/0x38
[<ffffffffa009d9e3>] mpt_config+0x160/0x289 [mptbase]
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffffa00ba388>] mptsas_probe_hba_phys+0x8e/0x8b3 [mptsas]
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8030ed27>] ? proc_register+0xb9/0x11a
[<ffffffff8025f723>] ? trace_hardirqs_off+0xd/0xf
[<ffffffff8052774f>] ? mutex_lock_nested+0x29b/0x2b4
[<ffffffff802606e8>] ? trace_hardirqs_on_caller+0x1f/0x15f
[<ffffffff8052775b>] ? mutex_lock_nested+0x2a7/0x2b4
[<ffffffffa00bbcbf>] ? mptsas_probe+0x398/0x439 [mptsas]
[<ffffffffa00bbcc7>] mptsas_probe+0x3a0/0x439 [mptsas]
[<ffffffff802506b7>] ? do_work_for_cpu+0x0/0x1b
[<ffffffff803b2c3e>] local_pci_probe+0x12/0x16
[<ffffffff802506ca>] do_work_for_cpu+0x13/0x1b
[<ffffffff80250911>] run_workqueue+0x12c/0x236
[<ffffffff802508ba>] ? run_workqueue+0xd5/0x236
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff80260835>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff802516d4>] worker_thread+0xdb/0xe8
[<ffffffff802545bc>] ? autoremove_wake_function+0x0/0x38
[<ffffffff802515f9>] ? worker_thread+0x0/0xe8
[<ffffffff80254499>] kthread+0x49/0x78
[<ffffffff8020ceda>] child_rip+0xa/0x20
[<ffffffff8020c8fc>] ? restore_args+0x0/0x30
[<ffffffff80239b33>] ? finish_task_switch+0x3b/0xe0
[<ffffffff80254450>] ? kthread+0x0/0x78
[<ffffffff8020ced0>] ? child_rip+0x0/0x20
---[ end trace dd3dd2a755e71b38 ]---
scsi 0:0:0:0: Direct-Access IBM-ESXS MAY2073RC T107 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors: (73.4 GB/68.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors: (73.4 GB/68.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
Loading usb-storInitializing USB Mass Storage driver...
age.ko module
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Waiting for driver initialization.
Waiting for driver initialization.
Scanning and configuring dmraid supported devices
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Welcome to Red Hat Enterprise Linux Server
Press 'I' to enter interactive startup.
Setting clock (utc): Tue Feb 17 19:31:00 IST 2009 [ OK ]
Starting udev: [ OK ]
Loading default keymap (us): [ OK ]
Setting hostname ls21b: [ OK ]
No devices found
Setting up Logical Volume Management: No volume groups found
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/1: clean, 599737/10246368 files, 6014197/10239421 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local filesystem quotas: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting background readahead: [ OK ]
Applying ip6tables firewall rules: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth1: [ OK ]
Starting auditd: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting portmap: [ OK ]
Starting NFS statd: [ OK ]
Starting RPC idmapd: FATAL: Module sunrpc not found.
FATAL: Error running install command for sunrpc
Error: RPC MTAB does not exist.
Starting system message bus: [ OK ]
Starting Bluetooth services:[ OK ]
[ OK ]
Mounting other filesystems: [ OK ]
Starting PC/SC smart card daemon (pcscd): [ OK ]
Starting hidd: [ OK ]
Starting autofs: Loading autofs4: [ OK ]
Starting automount: [ OK ]
[ OK ]
Starting acpi daemon: [ OK ]
Starting sshd: [ OK ]
Starting cups: [ OK ]
Starting xinetd: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
Starting xfs: [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting yum-updatesd: [ OK ]
Starting Avahi daemon... [ OK ]
Starting HAL daemon: [ OK ]
Starting smartd: [ OK ]
Red Hat Enterprise Linux Server release 5.1 (Tikanga)
Kernel 2.6.29-rc5-autotest-next-20090217 on an x86_64
ls21b login: -- 0:conmux-control -- time-stamp -- Feb/17/09 6:02:53 --
