Dave Airlie wrote:
On Thu, Dec 18, 2008 at 10:14 AM, Kevin Winchester
<kjwinchester@xxxxxxxxx> wrote:
Stephen Rothwell wrote:
Hi all,
I get the following BUG in the radeon drm code with today's linux-next when
I run "startx". I have not built or tested linux-next in a while, but the
problem definitely does not occur in mainline.
Do you have another X server running or just console?
Just console.
can you get a full dmesg with
echo 1 > /sys/module/drm/parameters/debug
[ 0.000000] Linux version 2.6.28-rc8-next-20081217 (kevin@winchester)
(gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #192 Wed Dec 17 17:04:30 AST 2008
[ 0.000000] Command line: root=/dev/sda1 hpet=force
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[ 0.000000] BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it
around.
[ 0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000004fff0000
[ 0.000000] 0000000000 - 004fe00000 page 2M
[ 0.000000] 004fe00000 - 004fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 4fff0000 @ 10000-14000
[ 0.000000] last_map_addr: 4fff0000 end: 4fff0000
[ 0.000000] ACPI: RSDP 000FA0C0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 4FFF0000, 002C (r1 AMIINT VIA_K8 10
MSFT 97)
[ 0.000000] ACPI: FACP 4FFF0030, 0081 (r1 AMIINT VIA_K8 11
MSFT 97)
[ 0.000000] ACPI: DSDT 4FFF0120, 36C5 (r1 VIA VIA_K8 1000
MSFT 100000D)
[ 0.000000] ACPI: FACS 4FFF8000, 0040
[ 0.000000] ACPI: APIC 4FFF00C0, 0054 (r1 AMIINT VIA_K8 9
MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 004fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 000078c910] TEXT DATA BSS ==>
[0000200000 - 000078c910]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #4 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000fba70] 000fba70
[ 0.000000] [ffffe20000000000-ffffe200011fffff] PMD ->
[ffff880001200000-ffff8800023fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004fff0
[ 0.000000] On node 0 totalpages: 327551
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1523 pages reserved
[ 0.000000] DMA zone: 2404 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4424 pages used for memmap
[ 0.000000] DMA32 zone: 319144 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 60000000 (gap:
50000000:aec00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 321548
[ 0.000000] Kernel command line: root=/dev/sda1 hpet=force
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 1800.008 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.000999] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.000999] Checking aperture...
[ 0.000999] AGP bridge at 00:00:00
[ 0.000999] Aperture from AGP @ d0000000 old size 32 MB
[ 0.000999] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[ 0.000999] Node 0: aperture @ d0000000 size 128 MB
[ 0.000999] Memory: 1282288k/1310656k available (2672k kernel code,
452k absent, 27308k reserved, 2032k data, 260k init)
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.001024] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3600.01 BogoMIPS (lpj=1800008)
[ 0.001173] Mount-cache hash table entries: 256
[ 0.001538] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.001589] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001637] tseg: 0000000000
[ 0.001674] CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 0a
[ 0.001802] ACPI: Core revision 20081031
[ 0.010007] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.010070] ftrace: allocating 15382 entries in 122 pages
[ 0.013765] Setting APIC routing to flat
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.023996] net_namespace: 576 bytes
[ 0.023996] NET: Registered protocol family 16
[ 0.024021] node 0 link 0: io port [0, ffffff]
[ 0.024025] TOM: 0000000050000000 aka 1280M
[ 0.024074] node 0 link 0: mmio [a0000, bffff]
[ 0.024077] node 0 link 0: mmio [50000000, ffffffff]
[ 0.024081] bus: [00,ff] on node 0 link 0
[ 0.024083] bus: 00 index 0 io port: [0, ffff]
[ 0.024086] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.024088] bus: 00 index 2 mmio: [50000000, fcffffffff]
[ 0.024098] ACPI: bus type pci registered
[ 0.024160] PCI: Using configuration type 1 for base access
[ 0.028819] bio: create slab <bio-0> at 0
[ 0.029724] ACPI: EC: Look up EC in DSDT
[ 0.032014] ACPI Warning (dsobject-0501): Package List length (65)
larger than NumElements count (2), truncated
[ 0.032110] [20081031]
[ 0.036779] ACPI: Interpreter enabled
[ 0.036829] ACPI: (supports S0 S1 S3 S5)
[ 0.036997] ACPI: Using IOAPIC for interrupt routing
[ 0.042058] ACPI: No dock devices found.
[ 0.042126] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.042289] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.042376] pci 0000:00:01.0: supports D1
[ 0.042407] pci 0000:00:06.0: reg 10 io port: [0xec00-0xecff]
[ 0.042413] pci 0000:00:06.0: reg 14 32bit mmio: [0xcfffff00-0xcfffffff]
[ 0.042432] pci 0000:00:06.0: reg 30 32bit mmio: [0xcff80000-0xcffbffff]
[ 0.042447] pci 0000:00:06.0: supports D1 D2
[ 0.042450] pci 0000:00:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.042502] pci 0000:00:06.0: PME# disabled
[ 0.042577] pci 0000:00:0b.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.042583] pci 0000:00:0b.0: reg 14 32bit mmio: [0xcffffe00-0xcffffeff]
[ 0.042602] pci 0000:00:0b.0: reg 30 32bit mmio: [0xcffc0000-0xcffdffff]
[ 0.042617] pci 0000:00:0b.0: supports D1 D2
[ 0.042620] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
[ 0.042671] pci 0000:00:0b.0: PME# disabled
[ 0.042759] pci 0000:00:0f.0: reg 20 io port: [0xfc00-0xfc0f]
[ 0.042820] pci 0000:00:10.0: reg 20 io port: [0xd800-0xd81f]
[ 0.042842] pci 0000:00:10.0: supports D1 D2
[ 0.042845] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.042896] pci 0000:00:10.0: PME# disabled
[ 0.042979] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.043022] pci 0000:00:10.1: supports D1 D2
[ 0.043024] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043076] pci 0000:00:10.1: PME# disabled
[ 0.043160] pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f]
[ 0.043182] pci 0000:00:10.2: supports D1 D2
[ 0.043184] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043236] pci 0000:00:10.2: PME# disabled
[ 0.043319] pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f]
[ 0.043341] pci 0000:00:10.3: supports D1 D2
[ 0.043343] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043395] pci 0000:00:10.3: PME# disabled
[ 0.043772] pci 0000:00:10.4: reg 10 32bit mmio: [0xcffffc00-0xcffffcff]
[ 0.043806] pci 0000:00:10.4: supports D1 D2
[ 0.043808] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043859] pci 0000:00:10.4: PME# disabled
[ 0.043959] pci 0000:00:11.0: Force enabled HPET at 0xfed00000
[ 0.044010] pci 0000:00:11.5: reg 10 io port: [0xd400-0xd4ff]
[ 0.044046] pci 0000:00:11.5: supports D1 D2
[ 0.044144] pci 0000:01:00.0: reg 10 32bit mmio: [0xb0000000-0xbfffffff]
[ 0.044149] pci 0000:01:00.0: reg 14 io port: [0xc800-0xc8ff]
[ 0.044154] pci 0000:01:00.0: reg 18 32bit mmio: [0xcfef0000-0xcfefffff]
[ 0.044163] pci 0000:01:00.0: reg 30 32bit mmio: [0xcfec0000-0xcfedffff]
[ 0.044175] pci 0000:01:00.0: supports D1 D2
[ 0.044196] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.044200] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.044204] pci 0000:00:01.0: bridge 32bit mmio pref:
[0xafd00000-0xcfcfffff]
[ 0.044211] pci 0000:00: bus on NUMA node 0
[ 0.044220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.063160] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.063692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.064218] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.064744] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.065271] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.066221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.066818] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.067403] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.068029] ACPI: Power Resource [URP1] (off)
[ 0.068113] ACPI: Power Resource [URP2] (off)
[ 0.068197] ACPI: Power Resource [FDDP] (off)
[ 0.068280] ACPI: Power Resource [LPTP] (off)
[ 0.068739] SCSI subsystem initialized
[ 0.068838] libata version 3.00 loaded.
[ 0.069007] usbcore: registered new interface driver usbfs
[ 0.069098] usbcore: registered new interface driver hub
[ 0.069201] usbcore: registered new device driver usb
[ 0.069434] PCI: Using ACPI for IRQ routing
[ 0.069494] pci 0000:00:00.0: BAR 0: can't allocate resource
[ 0.073101] agpgart-amd64 0000:00:00.0: AGP bridge [1106:3188]
[ 0.083981] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 0.084201] hpet clockevent registered
[ 0.084209] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.084378] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.088994] pnp: PnP ACPI init
[ 0.089049] ACPI: bus type pnp registered
[ 0.091981] pnp: PnP ACPI: found 6 devices
[ 0.092033] ACPI: ACPI bus type pnp unregistered
[ 0.092094] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.092144] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.092194] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.092244] system 00:01: ioport range 0x400-0x40f has been reserved
[ 0.092294] system 00:01: ioport range 0x820-0x821 has been reserved
[ 0.092345] system 00:01: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.097682] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.097733] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.097783] pci 0000:00:01.0: MEM window: 0xcfe00000-0xcfefffff
[ 0.097834] pci 0000:00:01.0: PREFETCH window:
0x000000afd00000-0x000000cfcfffff
[ 0.097907] pci 0000:00:01.0: setting latency timer to 64
[ 0.097912] pci 0000:00: bus resource 0 io: [0x00-0xffff]
[ 0.097915] pci 0000:00: bus resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.097918] pci 0000:01: bus resource 0 io: [0xc000-0xcfff]
[ 0.097920] pci 0000:01: bus resource 1 mem: [0xcfe00000-0xcfefffff]
[ 0.097923] pci 0000:01: bus resource 2 mem: [0xafd00000-0xcfcfffff]
[ 0.097926] pci 0000:01: bus resource 3 mem: [0x0-0x0]
[ 0.097973] NET: Registered protocol family 2
[ 0.109032] IP route cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.110146] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.118296] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.119398] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.119449] TCP reno registered
[ 0.122093] NET: Registered protocol family 1
[ 0.127358] alg: No test for stdrng (krng)
[ 0.127546] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.127610] io scheduler noop registered
[ 0.127729] io scheduler cfq registered (default)
[ 0.127793] PCI: VIA PCI bridge detected. Disabling DAC.
[ 0.127963] pci 0000:01:00.0: Boot video device
[ 0.128186] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.128249] ACPI: Power Button (FF) [PWRF]
[ 0.128414] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.128477] ACPI: Power Button (CM) [PWRB]
[ 0.128659] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.128728] ACPI: Sleep Button (CM) [SLPB]
[ 0.129298] processor ACPI_CPU:00: registered as cooling_device0
[ 0.142204] Linux agpgart interface v0.103
[ 0.142301] [drm] Initialized drm 1.1.0 20060810
[ 0.142711] alloc irq_2_pin on cpu 0 node 0
[ 0.142724] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.143012] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 0.143532] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.143606] r8169 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.143671] r8169 0000:00:0b.0: PCI: Disallowing DAC for device
[ 0.143729] r8169 0000:00:0b.0: no PCI Express capability
[ 0.143950] eth0: RTL8110s at 0xffffc2000001ee00, 00:11:09:e8:d8:73,
XID 04000000 IRQ 16
[ 0.147372] Driver 'sd' needs updating - please use bus_type methods
[ 0.149500] Driver 'sr' needs updating - please use bus_type methods
[ 0.149633] pata_via 0000:00:0f.0: version 0.3.3
[ 0.149649] alloc irq_2_pin on cpu 0 node 0
[ 0.149655] pata_via 0000:00:0f.0: PCI INT A -> GSI 20 (level, low)
-> IRQ 20
[ 0.149971] scsi0 : pata_via
[ 0.150206] scsi1 : pata_via
[ 0.153808] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 0.153859] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 0.311432] ata1.00: HPA detected: current 156299375, native 156301488
[ 0.311486] ata1.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100
[ 0.311536] ata1.00: 156299375 sectors, multi 16: LBA
[ 0.311729] ata1.01: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[ 0.311779] ata1.01: 156301488 sectors, multi 16: LBA
[ 0.315304] ata1.00: configured for UDMA/100
[ 0.318295] ata1.01: configured for UDMA/100
[ 0.491281] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A104, max UDMA/33
[ 0.491361] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
[ 0.513166] ata2.00: configured for UDMA/33
[ 0.535162] ata2.01: configured for UDMA/33
[ 0.537923] isa bounce pool size: 16 pages
[ 0.538137] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00JJ
05.0 PQ: 0 ANSI: 5
[ 0.538395] sd 0:0:0:0: [sda] 156299375 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.538478] sd 0:0:0:0: [sda] Write Protect is off
[ 0.538527] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.538557] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.538698] sd 0:0:0:0: [sda] 156299375 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.538774] sd 0:0:0:0: [sda] Write Protect is off
[ 0.538822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.538851] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.538922] sda: sda1 sda2 sda3
[ 0.545579] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.545759] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.545957] scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00JJ
05.0 PQ: 0 ANSI: 5
[ 0.546207] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.546284] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.546331] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.546359] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.546483] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.546558] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.546606] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.546633] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.546698] sdb: sdb1 sdb2 < sdb5<7>Switched to high resolution mode
on CPU 0
[ 0.587465] sdb6 >
[ 0.587880] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 0.588043] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 0.591926] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B
A104 PQ: 0 ANSI: 5
[ 0.604515] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 0.604577] Uniform CD-ROM driver Revision: 3.20
[ 0.604765] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.604864] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 0.613074] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B
0L23 PQ: 0 ANSI: 5
[ 0.620399] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 0.620585] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 0.620691] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 0.620861] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.620952] alloc irq_2_pin on cpu 0 node 0
[ 0.620963] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low)
-> IRQ 21
[ 0.621065] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.621168] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
bus number 1
[ 0.621318] ehci_hcd 0000:00:10.4: irq 21, io mem 0xcffffc00
[ 0.627007] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.627192] usb usb1: configuration #1 chosen from 1 choice
[ 0.627302] hub 1-0:1.0: USB hub found
[ 0.627376] hub 1-0:1.0: 8 ports detected
[ 0.627653] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.627819] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 0.627877] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.627974] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 2
[ 0.628075] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
[ 0.628265] usb usb2: configuration #1 chosen from 1 choice
[ 0.628372] hub 2-0:1.0: USB hub found
[ 0.628433] hub 2-0:1.0: 2 ports detected
[ 0.628627] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 0.628681] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.628785] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 3
[ 0.628865] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00
[ 0.629057] usb usb3: configuration #1 chosen from 1 choice
[ 0.629161] hub 3-0:1.0: USB hub found
[ 0.629217] hub 3-0:1.0: 2 ports detected
[ 0.629412] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 0.629467] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.629564] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 4
[ 0.629645] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
[ 0.629835] usb usb4: configuration #1 chosen from 1 choice
[ 0.629938] hub 4-0:1.0: USB hub found
[ 0.629995] hub 4-0:1.0: 2 ports detected
[ 0.630191] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 0.630245] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.630341] uhci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 5
[ 0.630423] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
[ 0.630613] usb usb5: configuration #1 chosen from 1 choice
[ 0.630725] hub 5-0:1.0: USB hub found
[ 0.630796] hub 5-0:1.0: 2 ports detected
[ 0.631117] usbcore: registered new interface driver usblp
[ 0.631166] Initializing USB Mass Storage driver...
[ 0.631282] usbcore: registered new interface driver usb-storage
[ 0.631331] USB Mass Storage support registered.
[ 0.642090] rtc_cmos 00:03: RTC can wake from S4
[ 0.642192] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.642278] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.642424] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts
with ACPI region SMOV [0x400-0x406]
[ 0.642487] ACPI: Device needs an ACPI driver
[ 0.642643] cpuidle: using governor ladder
[ 0.642690] cpuidle: using governor menu
[ 0.642871] usbcore: registered new interface driver usbhid
[ 0.642920] usbhid: v2.6:USB HID core driver
[ 0.643059] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 0.643475] alloc irq_2_pin on cpu 0 node 0
[ 0.643484] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level,
low) -> IRQ 22
[ 0.643697] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 1.135012] usb 5-1: new low speed USB device using uhci_hcd and
address 2
[ 1.158129] ALSA device list:
[ 1.158184] #0: VIA 8237 with ALC655 at 0xd400, irq 22
[ 1.158272] TCP cubic registered
[ 1.158320] NET: Registered protocol family 17
[ 1.158388] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 2800+
processors (1 cpu cores) (version 2.20.00)
[ 1.158528] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2
[ 1.158576] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 1.159128] rtc_cmos 00:03: setting system clock to 2008-12-19
20:00:06 UTC (1229716806)
[ 1.171597] kjournald starting. Commit interval 5 seconds
[ 1.171657] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.171719] VFS: Mounted root (ext3 filesystem) readonly.
[ 1.171784] Freeing unused kernel memory: 260k freed
[ 1.172218] Write protecting the kernel read-only data: 1536k
[ 1.295600] usb 5-1: configuration #1 chosen from 1 choice
[ 1.314287] input: Logitech USB Mouse as
/devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input3
[ 1.317076] generic-usb 0003:046D:C00C.0001: input: USB HID v1.10
Mouse [Logitech USB Mouse] on usb-0000:00:10.3-1/input0
[ 1.523025] usb 5-2: new low speed USB device using uhci_hcd and
address 3
[ 1.693636] usb 5-2: configuration #1 chosen from 1 choice
[ 1.711019] input: Microsoft Microsoft® Digital Media Pro Keyboard as
/devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2:1.0/input/input4
[ 1.719101] generic-usb 0003:045E:00B0.0002: input: USB HID v1.11
Keyboard [Microsoft Microsoft® Digital Media Pro Keyboard] on
usb-0000:00:10.3-2/input0
[ 1.748587] input: Microsoft Microsoft® Digital Media Pro Keyboard as
/devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2:1.1/input/input5
[ 1.754101] generic-usb 0003:045E:00B0.0003: input: USB HID v1.11
Device [Microsoft Microsoft® Digital Media Pro Keyboard] on
usb-0000:00:10.3-2/input1
[ 2.024888] Marking TSC unstable due to cpufreq changes
[ 2.584024] Clocksource tsc unstable (delta = -222214091 ns)
[ 4.281970] EXT3 FS on sda1, internal journal
[ 4.743154] kjournald starting. Commit interval 5 seconds
[ 4.743171] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
[ 4.743441] EXT3 FS on sda3, internal journal
[ 4.743451] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.791567] Adding 987988k swap on /dev/sda2. Priority:-1 extents:1
across:987988k
[ 15.790778] r8169: eth0: link up
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
