From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Date: Wed, 17 Dec 2008 18:22:24 +1100
> Today's linux-next build (x86_64 allmodconfig) produced these warnings:
>
> In file included from drivers/net/bnx2x_main.c:58:
> drivers/net/bnx2x_link.h:30:1: warning: "FLOW_CTRL_TX" redefined
> In file included from drivers/net/bnx2x_main.c:40:
> include/linux/mii.h:139:1: warning: this is the location of the previous definition
> In file included from drivers/net/bnx2x_main.c:58:
> drivers/net/bnx2x_link.h:31:1: warning: "FLOW_CTRL_RX" redefined
> In file included from drivers/net/bnx2x_main.c:40:
> include/linux/mii.h:140:1: warning: this is the location of the previous definition
>
> Caused by commit e18ce3465477502108187c6c08b6423fb784a313 ("net: Move flow control definitions to mii.h").
> --
Thanks, I'll fix this up with the following two commits:
--------------------
bnx2: Don't redefine FLOW_CTRL_{RX,TX}.
They are provided generically by linux/mii.h now.
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
---
drivers/net/bnx2.h | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 88f962b..900641a 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6848,9 +6848,6 @@ struct bnx2 {
u8 flow_ctrl; /* actual flow ctrl settings */
/* may be different from */
/* req_flow_ctrl if autoneg */
-#define FLOW_CTRL_TX 1
-#define FLOW_CTRL_RX 2
-
u32 advertising;
u8 req_flow_ctrl; /* flow ctrl advertisement */
--
1.5.6.5
--------------------
bnx2x: Fix namespace collision with FLOW_CTRL_{TX,RX}
These are now defined in linux/mii.h and the bnx2x driver
defines different values which are shared with hardware
data structures.
So add a "BNX2X_" prefix to these macro names.
Based upon a report from Stephen Rothwell.
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
---
drivers/net/bnx2x_link.c | 72 +++++++++++++++++++++++-----------------------
drivers/net/bnx2x_link.h | 10 +++---
drivers/net/bnx2x_main.c | 38 ++++++++++++------------
3 files changed, 60 insertions(+), 60 deletions(-)
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 4ce7fe9..67de94f 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -289,7 +289,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
/* pause enable/disable */
bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
EMAC_RX_MODE_FLOW_EN);
- if (vars->flow_ctrl & FLOW_CTRL_RX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
bnx2x_bits_en(bp, emac_base +
EMAC_REG_EMAC_RX_MODE,
EMAC_RX_MODE_FLOW_EN);
@@ -297,7 +297,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
(EMAC_TX_MODE_EXT_PAUSE_EN |
EMAC_TX_MODE_FLOW_EN));
- if (vars->flow_ctrl & FLOW_CTRL_TX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
bnx2x_bits_en(bp, emac_base +
EMAC_REG_EMAC_TX_MODE,
(EMAC_TX_MODE_EXT_PAUSE_EN |
@@ -333,7 +333,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
/* enable the NIG in/out to the emac */
REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1);
val = 0;
- if (vars->flow_ctrl & FLOW_CTRL_TX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
val = 1;
REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
@@ -396,7 +396,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
/* tx control */
val = 0xc0;
- if (vars->flow_ctrl & FLOW_CTRL_TX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
val |= 0x800000;
wb_data[0] = val;
wb_data[1] = 0;
@@ -423,7 +423,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
/* rx control set to don't strip crc */
val = 0x14;
- if (vars->flow_ctrl & FLOW_CTRL_RX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
val |= 0x20;
wb_data[0] = val;
wb_data[1] = 0;
@@ -460,7 +460,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
val = 0;
- if (vars->flow_ctrl & FLOW_CTRL_TX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
val = 1;
REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
@@ -580,14 +580,14 @@ void bnx2x_link_status_update(struct link_params *params,
}
if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
- vars->flow_ctrl |= FLOW_CTRL_TX;
+ vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX;
else
- vars->flow_ctrl &= ~FLOW_CTRL_TX;
+ vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX;
if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED)
- vars->flow_ctrl |= FLOW_CTRL_RX;
+ vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX;
else
- vars->flow_ctrl &= ~FLOW_CTRL_RX;
+ vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX;
if (vars->phy_flags & PHY_XGXS_FLAG) {
if (vars->line_speed &&
@@ -618,7 +618,7 @@ void bnx2x_link_status_update(struct link_params *params,
vars->line_speed = 0;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
/* indicate no mac active */
vars->mac_type = MAC_TYPE_NONE;
@@ -691,7 +691,7 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
return -EINVAL;
}
- if (flow_ctrl & FLOW_CTRL_RX ||
+ if (flow_ctrl & BNX2X_FLOW_CTRL_RX ||
line_speed == SPEED_10 ||
line_speed == SPEED_100 ||
line_speed == SPEED_1000 ||
@@ -1300,8 +1300,8 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
* Please refer to Table 28B-3 of the 802.3ab-1999 spec */
switch (params->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) {
+ case BNX2X_FLOW_CTRL_AUTO:
+ if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) {
*ieee_fc |=
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
} else {
@@ -1309,17 +1309,17 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
}
break;
- case FLOW_CTRL_TX:
+ case BNX2X_FLOW_CTRL_TX:
*ieee_fc |=
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
break;
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
+ case BNX2X_FLOW_CTRL_RX:
+ case BNX2X_FLOW_CTRL_BOTH:
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
break;
- case FLOW_CTRL_NONE:
+ case BNX2X_FLOW_CTRL_NONE:
default:
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
break;
@@ -1463,18 +1463,18 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
{ /* LD LP */
switch (pause_result) { /* ASYM P ASYM P */
case 0xb: /* 1 0 1 1 */
- vars->flow_ctrl = FLOW_CTRL_TX;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
break;
case 0xe: /* 1 1 1 0 */
- vars->flow_ctrl = FLOW_CTRL_RX;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
break;
case 0x5: /* 0 1 0 1 */
case 0x7: /* 0 1 1 1 */
case 0xd: /* 1 1 0 1 */
case 0xf: /* 1 1 1 1 */
- vars->flow_ctrl = FLOW_CTRL_BOTH;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
break;
default:
@@ -1531,7 +1531,7 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
pause_result);
bnx2x_pause_resolve(vars, pause_result);
- if (vars->flow_ctrl == FLOW_CTRL_NONE &&
+ if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE &&
ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
bnx2x_cl45_read(bp, port,
ext_phy_type,
@@ -1567,10 +1567,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
u16 lp_pause; /* link partner */
u16 pause_result;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
/* resolve from gp_status in case of AN complete and not sgmii */
- if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
(gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
(!(vars->phy_flags & PHY_SGMII_FLAG)) &&
(XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
@@ -1591,11 +1591,11 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
bnx2x_pause_resolve(vars, pause_result);
- } else if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
(bnx2x_ext_phy_resove_fc(params, vars))) {
return;
} else {
- if (params->req_flow_ctrl == FLOW_CTRL_AUTO)
+ if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
vars->flow_ctrl = params->req_fc_auto_adv;
else
vars->flow_ctrl = params->req_flow_ctrl;
@@ -1728,11 +1728,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
LINK_STATUS_PARALLEL_DETECTION_USED;
}
- if (vars->flow_ctrl & FLOW_CTRL_TX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
vars->link_status |=
LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
- if (vars->flow_ctrl & FLOW_CTRL_RX)
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
vars->link_status |=
LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
@@ -1742,7 +1742,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
vars->phy_link_up = 0;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->autoneg = AUTO_NEG_DISABLED;
vars->mac_type = MAC_TYPE_NONE;
}
@@ -3924,7 +3924,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->link_up = 0;
vars->line_speed = 0;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_NONE;
if (params->switch_cfg == SWITCH_CFG_1G)
@@ -3946,12 +3946,12 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
/* enable on E1.5 FPGA */
if (CHIP_IS_E1H(bp)) {
vars->flow_ctrl |=
- (FLOW_CTRL_TX | FLOW_CTRL_RX);
+ (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX);
vars->link_status |=
(LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
@@ -3974,7 +3974,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
bnx2x_bmac_enable(params, vars, 0);
@@ -3994,7 +3994,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_BMAC;
vars->phy_flags = PHY_XGXS_FLAG;
@@ -4009,7 +4009,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->link_up = 1;
vars->line_speed = SPEED_1000;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_EMAC;
vars->phy_flags = PHY_XGXS_FLAG;
@@ -4026,7 +4026,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = FLOW_CTRL_NONE;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->phy_flags = PHY_XGXS_FLAG;
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 86d54a1..47cb585 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -26,11 +26,11 @@
-#define FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO
-#define FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX
-#define FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX
-#define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
-#define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
+#define BNX2X_FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO
+#define BNX2X_FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX
+#define BNX2X_FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX
+#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
+#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
#define SPEED_AUTO_NEG 0
#define SPEED_12000 12000
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index a9c4de0..24d2ae8 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1921,10 +1921,10 @@ static void bnx2x_link_report(struct bnx2x *bp)
else
printk("half duplex");
- if (bp->link_vars.flow_ctrl != FLOW_CTRL_NONE) {
- if (bp->link_vars.flow_ctrl & FLOW_CTRL_RX) {
+ if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
+ if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
printk(", receive ");
- if (bp->link_vars.flow_ctrl & FLOW_CTRL_TX)
+ if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
printk("& transmit ");
} else {
printk(", transmit ");
@@ -1948,11 +1948,11 @@ static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
/* It is recommended to turn off RX FC for jumbo frames
for better performance */
if (IS_E1HMF(bp))
- bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+ bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
else if (bp->dev->mtu > 5000)
- bp->link_params.req_fc_auto_adv = FLOW_CTRL_TX;
+ bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
else
- bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+ bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
bnx2x_acquire_phy_lock(bp);
rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
@@ -7362,9 +7362,9 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
bp->link_params.req_flow_ctrl = (bp->port.link_config &
PORT_FEATURE_FLOW_CONTROL_MASK);
- if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ if ((bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
!(bp->port.supported & SUPPORTED_Autoneg))
- bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
+ bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE;
BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x"
" advertising 0x%x\n",
@@ -8353,13 +8353,13 @@ static void bnx2x_get_pauseparam(struct net_device *dev,
{
struct bnx2x *bp = netdev_priv(dev);
- epause->autoneg = (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ epause->autoneg = (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
(bp->link_params.req_line_speed == SPEED_AUTO_NEG);
- epause->rx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_RX) ==
- FLOW_CTRL_RX);
- epause->tx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_TX) ==
- FLOW_CTRL_TX);
+ epause->rx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) ==
+ BNX2X_FLOW_CTRL_RX);
+ epause->tx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) ==
+ BNX2X_FLOW_CTRL_TX);
DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n"
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
@@ -8378,16 +8378,16 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
- bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
+ bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO;
if (epause->rx_pause)
- bp->link_params.req_flow_ctrl |= FLOW_CTRL_RX;
+ bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_RX;
if (epause->tx_pause)
- bp->link_params.req_flow_ctrl |= FLOW_CTRL_TX;
+ bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_TX;
- if (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO)
- bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
+ if (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
+ bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE;
if (epause->autoneg) {
if (!(bp->port.supported & SUPPORTED_Autoneg)) {
@@ -8396,7 +8396,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
}
if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
- bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
+ bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO;
}
DP(NETIF_MSG_LINK,
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-next" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
