Christoph Lameter wrote: > Reboot and switch on debugging by either specifying slub_debug as a kernel > command line parameter or setting CONFIG_SLUB_DEBUG_ON. This looks like the > freelists are corrupted. Could be a use after free or something. > > Sorry for the delayed response, after passing the slub_debug as the command line parameter while booting the kernel oops, the kernel faults with message Kernel command line: root=/dev/sdb1 selinux=0 elevator=cfq slub_debug IDENT=1218735938 . . <snip> . . Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6be3 Faulting instruction address: 0xc0000000002afb98 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=128 NUMA pSeries Modules linked in: NIP: c0000000002afb98 LR: c0000000002afb84 CTR: 0000000000000000 REGS: c00000077ccc7a80 TRAP: 0300 Not tainted (2.6.27-rc2-next-20080812-autotest) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 84004044 XER: 00000000 DAR: 6b6b6b6b6b6b6be3, DSISR: 0000000040000000 TASK = c00000077cb9daa0[881] 'khvcd' THREAD: c00000077ccc4000 CPU: 2 GPR00: c0000000002afb84 c00000077ccc7d00 c000000000871068 c00000077cfd18d8 GPR04: 0000000000000000 00000000000000f7 c0000000008bc448 0000000000000002 GPR08: 0000000000000010 6b6b6b6b6b6b6b6b 0000000000000002 0000000000000000 GPR12: 000000000000d032 c0000000008a4700 0000000000000000 c00000000063ad18 GPR16: 4000000003a00000 c0000000006395b0 0000000000000000 00000000002b1000 GPR20: 000000000411ff10 c00000000071ff10 0000000000000000 0000000000000001 GPR24: 0000000000000000 0000000004500000 c0000000008b5920 c00000077ce78898 GPR28: c00000077e0bf6d8 c00000077cfd18d8 c0000000007f7b00 c00000077cfd18f8 NIP [c0000000002afb98] .tty_wakeup+0x40/0xa4 LR [c0000000002afb84] .tty_wakeup+0x2c/0xa4 Call Trace: [c00000077ccc7d00] [c0000000002afb84] .tty_wakeup+0x2c/0xa4 (unreliable) [c00000077ccc7d90] [c0000000002cd3a0] .hvc_poll+0x240/0x2d4 [c00000077ccc7e70] [c0000000002cd570] .khvcd+0x6c/0x184 [c00000077ccc7f00] [c000000000070450] .kthread+0x78/0xc4 [c00000077ccc7f90] [c000000000025854] .kernel_thread+0x4c/0x68 Instruction dump: f8010010 f821ff71 60000000 e80300b0 7809dfe3 41820050 48008c81 60000000 7c7f1b79 41820040 e93f0000 7fa3eb78 <e9290078> 2fa90000 419e0020 e8090000 ---[ end trace 839b2deb5e384ce9 ]--- BUG: soft lockup - CPU#0 stuck for 61s! [touch:3162] Modules linked in: NIP: c0000000004d86c4 LR: c000000000013dbc CTR: 0000000000000000 REGS: c00000077ca5fa70 TRAP: 0901 Tainted: G D (2.6.27-rc2-next-20080812-autotest) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 24000484 XER: 20000000 TASK = c00000077e3e5aa0[3162] 'touch' THREAD: c00000077ca5c000 CPU: 0 GPR00: 0000020000000000 c00000077ca5fcf0 c000000000871068 0000000000000000 GPR04: 00000000ff86e868 0000000000000000 0000000000000000 0000000000000002 GPR08: 0000000000000000 0000000000000000 0000000000000200 0000000080000001 GPR12: 000000000000f032 c0000000008a4300 NIP [c0000000004d86c4] .lock_kernel+0x7c/0xb8 LR [c000000000013dbc] .compat_sys_sysctl+0xc4/0x1a8 Call Trace: [c00000077ca5fcf0] [c00000077ca5fe30] 0xc00000077ca5fe30 (unreliable) [c00000077ca5fd70] [c000000000013dbc] .compat_sys_sysctl+0xc4/0x1a8 [c00000077ca5fe30] [c0000000000086ac] syscall_exit+0x0/0x40 Instruction dump: 40a2fff0 4c00012c 2fab0000 41be003c 7c210b78 e92d0000 e8090008 78097fe1 41820010 e87e8000 4bb5a70d 60000000 <e93e8000> 80090000 2fa00000 40beffd4 The git-bisect points to git-bisect start # good: [0967d61ea0d8e8a7826bd8949cd93dd1e829ac55] Linux 2.6.27-rc2 git-bisect good 0967d61ea0d8e8a7826bd8949cd93dd1e829ac55 # bad: [8a7363ad1b105ba8e979a1b00fada5cb6dbfc84e] Add linux-next specific files for 20080812 git-bisect bad 8a7363ad1b105ba8e979a1b00fada5cb6dbfc84e # good: [771310c770214cd879d30d0825fb5e140cd74866] KVM: s390: Fix kvm on IBM System z10 git-bisect good 771310c770214cd879d30d0825fb5e140cd74866 # good: [4802ad47115e469f1dfe7a19086d9b14c059f5bc] Merge commit 'sh/master' git-bisect good 4802ad47115e469f1dfe7a19086d9b14c059f5bc # good: [cde62a78e433323f5b3bf0fbb42073209102edb4] Merge commit 'mtd/master' git-bisect good cde62a78e433323f5b3bf0fbb42073209102edb4 # good: [c4e1eb40bc64f1127ae3d631702fa4f38aa6100c] Revert "UBIFS: add NFS support" git-bisect good c4e1eb40bc64f1127ae3d631702fa4f38aa6100c # good: [a59766bbf8b44caafc1c16539b90f77aed757765] Merge commit 'kmemcheck/auto-kmemcheck-next' git-bisect good a59766bbf8b44caafc1c16539b90f77aed757765 # bad: [0806d59f07a0fb258ec92fcf236364a9424dc4bb] Merge branch 'quilt/ttydev' git-bisect bad 0806d59f07a0fb258ec92fcf236364a9424dc4bb # good: [da250c4bb64a4b3cec3b723ead8e9ebc3f9462af] Merge commit 'drm/drm-next' git-bisect good da250c4bb64a4b3cec3b723ead8e9ebc3f9462af # good: [3e0301ea47644782e0c0432b66fffd9da86323cc] tty-fix-pty-termios-race git-bisect good 3e0301ea47644782e0c0432b66fffd9da86323cc # bad: [618f77c709473bf8c57b2be76f2c728349da1749] tty-kref-stallion git-bisect bad 618f77c709473bf8c57b2be76f2c728349da1749 # bad: [a2148160bbc82db03e874cca505a74de134df8ba] tty-move-write git-bisect bad a2148160bbc82db03e874cca505a74de134df8ba # bad: [b18540aa6f5cf3c12b14c3ab9a6cc4492a6eb930] tty-kref-modcount git-bisect bad b18540aa6f5cf3c12b14c3ab9a6cc4492a6eb930 # bad: [d43a0b46168489882b40798bd1b2bb69ccdf5d99] tty-kref git-bisect bad d43a0b46168489882b40798bd1b2bb69ccdf5d99 I was not able to reproduce this oops with next-20080813/14/15, hope some fixes have gone into the next releases. -- Thanks & Regards, Kamalesh Babulal, Linux Technology Center, IBM, ISTL. -- To unsubscribe from this list: send the line "unsubscribe linux-next" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
