* Alexander Zubkov (green@xxxxxxxxxx) wrote:
> Several files have "accept*" misspelled as "accpet*" in the comments.
> Fix all such occurrences.
>
> Signed-off-by: Alexander Zubkov <green@xxxxxxxxxx>
Reviewed-by: Dr. David Alan Gilbert <linux@xxxxxxxxxxx>
hmm, should probably cc in some maintainers, I guess networking.
(added netdev and Paolo)
Dave
> ---
> drivers/infiniband/hw/irdma/cm.c | 2 +-
> drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c | 4 ++--
> drivers/net/ethernet/natsemi/ns83820.c | 2 +-
> include/uapi/linux/udp.h | 2 +-
> 4 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/infiniband/hw/irdma/cm.c b/drivers/infiniband/hw/irdma/cm.c
> index 36bb7e5ce..ce8d821bd 100644
> --- a/drivers/infiniband/hw/irdma/cm.c
> +++ b/drivers/infiniband/hw/irdma/cm.c
> @@ -3631,7 +3631,7 @@ void irdma_free_lsmm_rsrc(struct irdma_qp *iwqp)
> /**
> * irdma_accept - registered call for connection to be accepted
> * @cm_id: cm information for passive connection
> - * @conn_param: accpet parameters
> + * @conn_param: accept parameters
> */
> int irdma_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
> {
> diff --git a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c
> index 455a54708..96fd31d75 100644
> --- a/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c
> +++ b/drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c
> @@ -342,8 +342,8 @@ static struct sk_buff *copy_gl_to_skb_pkt(const struct pkt_gl *gl,
> {
> struct sk_buff *skb;
>
> - /* Allocate space for cpl_pass_accpet_req which will be synthesized by
> - * driver. Once driver synthesizes cpl_pass_accpet_req the skb will go
> + /* Allocate space for cpl_pass_accept_req which will be synthesized by
> + * driver. Once driver synthesizes cpl_pass_accept_req the skb will go
> * through the regular cpl_pass_accept_req processing in TOM.
> */
> skb = alloc_skb(gl->tot_len + sizeof(struct cpl_pass_accept_req)
> diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
> index 998586872..bea969dfa 100644
> --- a/drivers/net/ethernet/natsemi/ns83820.c
> +++ b/drivers/net/ethernet/natsemi/ns83820.c
> @@ -2090,7 +2090,7 @@ static int ns83820_init_one(struct pci_dev *pci_dev,
> */
> /* Ramit : 1024 DMA is not a good idea, it ends up banging
> * some DELL and COMPAQ SMP systems
> - * Turn on ALP, only we are accpeting Jumbo Packets */
> + * Turn on ALP, only we are accepting Jumbo Packets */
> writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD
> | RXCFG_STRIPCRC
> //| RXCFG_ALP
> diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h
> index 1a0fe8b15..d85d671de 100644
> --- a/include/uapi/linux/udp.h
> +++ b/include/uapi/linux/udp.h
> @@ -31,7 +31,7 @@ struct udphdr {
> #define UDP_CORK 1 /* Never send partially complete segments */
> #define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */
> #define UDP_NO_CHECK6_TX 101 /* Disable sending checksum for UDP6X */
> -#define UDP_NO_CHECK6_RX 102 /* Disable accpeting checksum for UDP6 */
> +#define UDP_NO_CHECK6_RX 102 /* Disable accepting checksum for UDP6 */
> #define UDP_SEGMENT 103 /* Set GSO segmentation size */
> #define UDP_GRO 104 /* This socket can receive UDP GRO packets */
>
> --
> 2.45.2
>
>
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \
\ dave @ treblig.org | | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/
