Re: Sending ICMP echo request out

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



First, I am confused as to if this is two separate requests for help, or one request with two separate people using the same e-mail thread?

If you have one router and two physical hosts, run a tcpdump capture on both hosts and look at them using Wireshark. Most likely the firewall is blocking ICMP echo replies if indeed host two is responding to host's one echo request.

Second, why don't you post your iptables rules here which will help people understand what your iptables router is doing?

iptables -Lvn


Quoting anil dahiya <anildahiya80@xxxxxxxxx>:

Hi ,

I have following setup with routing table as shown below:

+-----------------------+
|    System-1      |
|     "client"         |
|------------------------|
|  192.168.11.5   |
+----------------------+
       |
       |
+------+-----+
|   Switch   +----------------------+
+------+-----+                        |
       |                                 |
       |                       +-------------------------+
       |                        |  192.168.11.1      |
       |                        |---------------------------|
       |                        |     Router            |
       |                        |-------------------------- |
       |                        |   192.168.12.1     |
       |                       +--------------------------+
       |                                    |
       |                                    |
+------------------------+                |
|  192.168.11.6      |                |
|--------------------------|                |
|   System-2        |                |
|--------------------------|                |
|   192.168.12.6    |                |
|                          |----------------+
+------------------------+

Routing table details of setup
------------------------------------------
System-1
-----
$route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.11.0    0.0.0.0         255.255.255.0   U     1      0        0 eth1
0.0.0.0         192.168.11.1    0.0.0.0         UG    0      0        0 eth1


Router
-----------
$route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.12.0    0.0.0.0         255.255.255.0   U     0      0        0 eth1
192.168.11.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0


System-2
------
$route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.12.0    0.0.0.0         255.255.255.0   U     0      0        0 eth1
192.168.11.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0
0.0.0.0         192.168.12.1    0.0.0.0         UG    0      0        0 eth1


When I do ping from system-1 192.168.11.5 to system-2 192.168.12.6 ,
ping echo packet is reaching on system-2 through NIC 192.168.12.6 but
system is not sending any response to 192.168.11.5 using either of NIC
i.e 192.168.11.6 or 192.168.12.6 ? Why this is happening ? Can you
help me ?

I have observed same type of symtoms when I do SSH from 192.168.11.5
to 192.168.12.6

FYI,
ip_forwarding is enable on router and iptables are no configured on
any of system .

Thanks,
Anil
--
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs


[Index of Archives]     [Audio]     [Hams]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Fedora Users]

  Powered by Linux